Light Sky SUPER SCOPE User manual

SUPER SCOPE
Please read these user manual carefully before use!
E-mail:
n
Address: No. 43, Yunfeng Road, Xiuquan Street,
Huadu District, Guangzhou, China

Contents
1. Safety information........................................................................................................2
2. Technical information...................................................................................................4
3. Attachment and body size.........................................................................................8
4. Installation and connecting.......................................................................................9
5. Control panel..............................................................................................................12
6. Menu setting...............................................................................................................13
7. Channel function.........................................................................................................18
8. Circuit connecting diagram.......................................................................................24
9. Cleaning and maintenances.......................................................................................25
10.Troubeshooting..........................................................................................................26
11.Duty exonerative and copyright protection............................................................28
Congratulations on choosing our company product! We thank you for your custom.
◆Please note that this product, as all the others in the rich my company range, has
been designed and made with total quality to ensure excellent performance and
best meet your expectations and requirements.
◆Carefully read this user manual in its entirety and keep it safe for future reference.
It is essential to know the information and comply with the instructions given in this
manual to ensure the fitting is installed, used and serviced correctly and safely.
◆My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried
out in conformity with this user manual, which must always accompany the fitting.
◆My company reserves the right to modify the characteristics stated in this user
manual at any time and without prior notice.

Ensure a minimum clearance of 0.2m around the cooling fans and ventilation.
Please do not install the fixture onto combustible surface.
The double insulation between the LV power supply and the control conductor on the fixture.
The fixture is intended for indoor application.
ta40℃
40
Do not expose the front glass to sunlight or other strong light source from any angle.
Lenses can focus the sun's rays inside the fixture, creating a potential fire hazard.
■Mounting surface and fire protection
Keep all combustible materials at least 20 cm away from the fixture.
■This lighting fixture is for professional use only - it is not for household use.
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be prgperly hooked onto the fitting and secured to the framework.
When suspending the fixture, ensure that the supporting structure and all hardware used
can hold at least 10 times the weight of all the devices they support.
。

The products referred to in this manual conform to the European Community Directives to which
they are subject:
Low Voltage 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
Protection against explosion
The protection screen, lens or uv screen on the lamp can be damaged to the degree of failure
if visible damage, such as a crack or deep mark, should be replaced。
The light source in this fixture shall be replaced by the manufacturer or its service agent or
similar qualification.
Always disconnect from mains before replacing the light.
Light
The maximun temperature that can be reached on the external surface of the fitting,
in a thermally steady state,is 80℃ 。
Avoid contact bypersons and materials.
Allow the fixture to cool for at least 15 minutes before handling.
tc 80℃
Never look directly into the light source. You risk injury to your retina, which may induce blindness.
Do not look at LEDs with magnifiers, telescopes, binoculars or similar optical instruments that may
concentrate the light output.
Protection optical radiation

● ：Power supplies available
AC100-240V∽，50/60Hz
190-240V/4.5A; 100-125V/8.5A
● Rated power ：
910W PF 0.980-
● Light source
- 580W white light LED module
- Light source power ：580W
- Colour temperature:6300K
- Average life :20000h
● Motors :
- 30 ultra-quiet motors
● Channe ：
-Standard channel:39CH; Extension channel:54CH
● Protocols: DMX-512, RDM, Art-Net
● Color wheel
- 8 colors + white，Bi-direction rainbow effect
● Color mixing system
- Linear CMY+CTO color mixing system
Enhance CRI color rendering ：●
- Can increase to 91 the above
●Static gobo wheel
- φ138 9Gobo + 1 white + animation
●Rotation Gobo Wheel
- 7 rotating Gobos + white,Bi-direction flow water
animation effect，Design size: inside diameter 17,
outside diameter 22.9 .
Framing Shutters System●：
- A cutting module that can freely transform from
eight to four pieces.
The aperture●：
-5-100% linearly adjustable with macro.
●Strobe
- 1-25 times/second
●Dimmer
- Electronic dimmer 0-100％ linear adjustment.，
●Prism
- 4 Prism+16 double Prism+multi combination effect
● Beam angle：
6°-50°-
● Frost
- 1° and 10° two levels of atomization
●Focus and Lens
- φ127High precision optical lens, linear adjustment
● X/Y Travel：
Pan movement 540°，Tilt movement 270°
● X/Y Resolution：2.11°/1.05°
● X/Y Speed：2.7S/2.1S
● Software upgrade
- Insert USB upgrade software.
●Display
- Display panel adopts 2.8 inch resistive color touch screen
with good pressure sensitivity
- Chinese and English languages can be switched freely，
menu available to display 180°reversely
● IP set
- Automatic chang battery,IP could be set without electricity.
●Features
- Input signal isolation: guarantees stable signal transmission
without interference。
Advanced Art-Net function
●IP20 protection
● Safety Devices
- BIPOlar circuit breaker with thermal protection.
● Cooling
- Forced ventilation with axial fans.
●Structure
- Heat-proof plastic+module pressing alloy materials.
●CE Marking
- In conformity with the European Union Low Voltage
Directive 2014/35/EU and Electomagnetic compatibility
Directive 2014/30/EU.
●The vertical direction of the use of hidden locking
device,convenient transportation and maintenance.
● Lighting Size ：510X300X731MM
● Box Size ：810X580X395MM
N.W.：33.2kg ，G.W.：37.5kg
● Flycase Size (1SETS)：
620X580X850MM
N.W.：33.2kg ，G.W.：66.5kg

5
Static gobo wheel
Color wheel
Rotating gobo wheel
2
CMY color mixing system
3
CM Y K

90° turn
Blade UP 2
Blade DW 2
Blade UP 1
Blade DW 1
Blade RG 2
Blade LF 2
Blade RG 1
Blade LF 1
Pan：0
Tilt：43
Blade UP/Blade D W/Blade RG/Blade LF:45
All Blade Rot:0
Pan：0
Tilt：43
Blade UP/Blade D W/Blade RG/Blade LF:45
All Blade Rot:255
Note: The xture is standing on the oor.
The display panel is facing the xture's head.
Framing Shutters System
Blade UP 1 Blade RG 2
Blade DW 1
Blade LF 2
Blade DW 2
Blade RG 1
Blade UP 2
Blade LF 1
4 Prism 16 double Prism
6

7
0
5
10
15
20
5
10
15
20
510 15 20 400 30 50
Distance m
50 diameter m(ft in)
6 diameter m(ft in) 0.55(1'10'')
4.72(15'6'')
1.05(3'5'')
9.57(31'5'')
1.58(5'2'')
14.4(47'3'')
2.10(6'11'')
18.95(62'2'')
4.3(14'1'')
37.6(123'4'')
3.23(10'7'')
28.25(92'8'')
5.0(61'4'' )
46.8(153'6'')
Standard 6 - 50°)( °
distance,spot diameter and illumination diagram
6 highlights
50 highlights
60500(5623) 15000(1394) 6520(606) 3750(349) 2650(153) 1918(178) 580(54)
1970(183) 512(48) 206(19) 132(12) 58(5) 37(3) 23(2)
4

power cord
8
40 0
51 0
196
209.77
140.1
14 1 .4
580.61
731
412
281.23
207.28
555.32
397.03
323.22
626
488
270
300

9
Safety rope
The fixture can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:with the exception of when the fixture is positioned on the floor, the safety rope must be fitted.
This must be securely fixed to the support structure of the fixture and then connected to the fixing point at
the centre of the base.
Make sure all parts for fixing the fixture are in a good state of repair.
Make sure the point of anchorage is stable before positioning the fixture.
When suspending the fixture, ensure that the supporting structure and all hardware used can
hold at least 10 times the weight of all the devices they support.
Compact,standard clamp system equipped & easy installation

power in out power end
out in in
10
● After doing the above operation and making sure all the devices had been installed with
natural operate, press the power switch to check whether everything is working normally.
● Connection to the eiectricty mains must be carried out by a qualified electrical installer.
● The fixture power supply can not be more than 2pcs pre line.
The N terminal is connected
with the blue line.
Ground
The L terminal is connected
with the brown line.
Watertight seal ring
Watertight seal ring
●The fixture delivers a three-core waterproof plug.

DMX512 in
out signal end
out in in
11
DMX - output
1
- Shield
2 - Signal (-)
- Signal (+)
- Not connected
- Not connected
3
1
2
3
DMX-input
- Shield
- Signal (-)
- Signal (+)
- Not connected
- Not connected
4
5
4
5

Display
Display
DMX S e t u p t h e
Address code
The channel model
The input mode
state
001
（***— * **）
Channel model：standard（39CH）
The light source temperature：**°
The bottom case temperature：**°
ENTER
Display panel adopts 2.8 inch resistive color touch screen with good pressure sensitivity
Chinese and English languages can be switched freely.
12
Up arrowhead:page up
Down arrowhead:page down
Left arrowhead:page left or reduce
Right arrowhead:page right or increase
Enter:OK function
Exit:in the choice screen
DMX SETTING Info
Person Manual
Test Service
Page up
Exit Switch between Chinese and English
Page down

13
DMX SETTING →
Address →1-512
Channel mode →Extended（54）
Standard（39）
Input mode →DMX 512
Art-Net
State →Blackout
Hold
Info →
Fixture times →LED on time
All time
Temperatures →LED TEMP
Base TEMP
RDM info
→
UID:0x3888XXXXXX
Manufactory Label：LIGHT SKY
Device Label：SUPER SCOPE
DMX live
→
1.Pan
→ 0 - 255
2.Pan fine
3.Tilt
4.Tilt Fine
5.P/T speed
6.Functions
7.Cyan
8.Cyan fine
9.Magenta
10.Magenta fine
11.Yellow
12.Yellow fine
13.CTO
14.CTO fine
15.Colour wheel
16.Static Gobo
17.Rot.
Gobo
18.Gobo
Rot.
19.Blade
UP1
20.Blade UP1 fine
21.Blade UP2
22.Blade UP2 fine
23.Blade DW1
24.Blade DW1 fine
25.Blade DW2
26.Blade DW2 fine
27.Blade LF1
28.Blade LF1 fine
29.Blade LF2
30.Blade LF2 fine
31.Blade RF1
32.Blade RF1 fine
33.Blade RF2
34.Blade RF2 fine
35.Framing Rot.
36.Framing Rot.F.
37.Framing Mac.
38.Framing Mac.Z.
39.Prism1
40.Prism1 Rot
41.Prism2
42.Prism2 Rot
43.Frost1
44.Frost2
45.Iris
46.Zoom
47.Zoom fine
48.Focus
49.Focus fine
50.Auto Dis.
51.Auto Fin
52.Strobe
53.Dimmer
Main menu I menu II menu Ⅳ menu III menu
Power on time

14
54.Dimmer fine
Version info
Display
VX.XXX
.
Pan/Tilt
Gobo module
Framing module
Zoom module
LEDDRV
FANDRV
Person
Pan/Tilt →
PT swap
→
OFF
Pan invert
Tilt invert
ON
PT move black
Fan mode
→
Silent mode
Standard mode
Hot mode
Display
→
Language
English
Chinese
Backlight time Always
Auto (30S)
Intensity 0 - 100
Rotation
Normal
Rotate 180
Auto
Art-Net
IP Address xxx.xxx.xxx.xxx
Mask Address xxx.xxx.xxx.xxx
→Net Address 0 - 127
Sub Net Address 0 - 15
Universe Address 0
-
15
Manual →
Manual
Control →
1.Pan
→ 0 - 255
2.Pan
fine
3.Tilt
4.Tilt Fine
5.P/T speed
6.Functions
7.Cyan
8.Cyan fine
9.Magenta
10.Magenta fine
11.Yellow
12.Yellow fine
13.CTO
14.CTO fine
15.Colour wheel
16.Static Gobo
17.Rot. Gobo
18.Gobo Rot.
19.Blade UP1
20.Blade UP1 fine
21.Blade UP2
22.Blade UP2 fine
23.Blade DW1
24.Blade DW1 fine
25.Blade DW2
26.Blade DW2 fine
27.Blade LF1
28.Blade LF1 fine
29.Blade LF2
30.Blade LF2 fine
31.Blade RF1
32.Blade RF1 fine
33.Blade RF2
34.Blade RF2 fine
35.Framing Rot.
36.Framing Rot.F
37.Framing Mac.
Main menu I menu II menu Ⅳ menu III menu
Led Hz 1200Hz / 1200Hz
20000Hz / 20000Hz
→

15
38.Framing Mac.Z.
39.Prism1
40.Prism1 Rot
41.Prism2
42.Prism2 Rot.
43.Frost
44.Frost
45.Iris
46.Zoom
47.Zoom fine
48.Focus
49.Focus fine
50.Auto Dis
51.Auto Fin
52.Strobe
53.Dimmer
54.Dimmer fine
Reset →
Pan/Tilt reset
Color reset
Gobo reset
Framing reset
Zoom reset
Total reset
Test
Test all
→In the test
Test pan/tilt
Test effects
Fixture state →
Memory IC
→
OK
Reset
Error
Angle
Sensor
Pan Encodeer
Pan Drive IC
Tilt Encoder
Tilt Drive IC
LED Fan
Bottom Fan
Temperature
Pan
Tilt
Cyan
Magenta
Yellow
CTO
Iris
Frost 1
Frost 2
Colour wheel
Fixation wheel
Main menu I menu II menu Ⅳ menu III menu

16
Service →
Rota.gobo
Gobo.rota
Zoom
Focus
Prism 1
Prism 2
Framing
Framing rota
Adjust
→
Pan
→ 0 - 255
Tilt
Cyan
Magenta
Yellow
CTO
Colour wheel
Fixation wheel
Rota.gobo
Gobo.rota
Blade UP1
Blade UP2
Blade DW1
Blade DW2
Blade LF1
Blade LF2
Blade RF1
Blade RF2
Framing rotat
Iris
Zoom
Focus
Prism 1
Prism 2
Frost 1
Frost 2
Factory Reset Password
→YES / NO
Main menu I menu II menu Ⅳ menu III menu
LED fan 1
LED fan 2
LED fan 3
LED fan 4
GOBO fan
Fan speed

17
Factory
→
Reset timers Password
→
Reset led timers →YES / NO
Reset all timers
Update
Password
→
Simple update
→
Display
Pan/Tilt / XY
Gobo module
Framing module
Zoom module
LEDQD
FANDRV
Whole update
→
Display
Pan/Tilt / XY
Gobo module
Framing module
Zoom module
LEDQD
FANDRV
LED output power Password
→50 - 100
Reset power on timers
Main menu I menu II menu Ⅳ menu III menu

18
CHANNEL FUNCTION(V1.0) 39CH/
DMX
Note
1Pan 0 - 255
2Pan fine 0 - 255
3Tilt 0 - 255
4Tilt Fine 0 - 255
5P/T speed 0 - 255
6Functions
0 - 10 NO function
11 - 20 The whole lamp reset
21 - 30 XY reset
31 - 40 Color reset
41 - 50 pattern reset
51 - 60 Cutting reset
61 - 70 Focus module reset
71 - 80 Silent mode
81 - 90 Normal mode
91 - 100 High Pattern
101 - 110
111 - 120
121 - 130
131 - 140
141 - 150
151 - 160
161 - 170
171 - 180 Show backlight is always on
181 - 190 Display backlight automatically
201 - 255 NO function
7Cyan 0 - 255
8Magenta
0
- 255
9Yellow
0
- 255
10 CTO 0 - 255
11 Colour wheel
0 - 89 0 - 360°
90 - 99 OPEN
100 - 109 COLOR1
110 - 119 COLOR2
120 - 129 COLOR3
130 - 139 COLOR4
140 - 149 COLOR5
150 - 159 COLOR6
160 - 169 COLOR7
170 - 179 COLOR8
180 - 214
215 - 249
250 - 255 Random color
12 Static Gobo
0 - 9 OPEN
10 - 19 GOBO1
20 - 29 GOBO2
30 - 39 GOBO3
40 - 49 GOBO4
50 - 59 GOBO5
60 - 69 GOBO6
70 - 79 GOBO7
80 - 89 GOBO8
90 - 99 GOBO9
100 - 109 GOBO1 Jitter slow to fast
110 - 119 GOBO2
120 - 129 GOBO3
130 - 139 GOBO4
140 - 149 GOBO5
Functions
Channel Percentage
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
CCW,Fast→Slow
CW,Slow→Fast
NO function
NO function
NO function
NO function
NO function
NO function
NO function
191 - 200
Open the function

19
150 - 159 GOBO6
160 - 169 GOBO7
170 - 179 GOBO8
180 - 189 GOBO9
190 - 199 OPEN
200 - 224
225 - 249
250 - 255 Random Gobo
13 Rot. Gobo
0 - 9 OPEN
10 - 19 GOBO1
20 - 29 GOBO2
30 - 39 GOBO3
40 - 49 GOBO4
50 - 59 GOBO5
60 - 69 GOBO6
70 - 79 GOBO7
80 - 89 GOBO1
90 - 99 GOBO2
100 - 109 GOBO3
110 - 119 GOBO4
120 - 129 GOBO5
130 - 139 GOBO6
140 - 149 GOBO7
150 - 159 OPEN
160 - 204
205 - 249
250 - 255 Random Gobo
14 Gobo Rot.
0 - 127 0° - 360°
128 - 187 CW,Fast→Slow
188 - 195 STOP
196 - 255 CCW,Slow→Fast
15 Blade UP1 0 - 255
16 Blade UP2 0 - 255
17 Blade DW1 0 - 255
18 Blade DW2 0 - 255
19 Blade LF1 0 - 255
20 Blade LF2 0 - 255
21 Blade RF1 0 - 255
22 Blade RF2 0 - 255
23 Framing Rot. 0 - 255 0° - 90°
24 Framing Mac.
0 - 10 There is no
11 - 20 quadrate
21 - 30 rectangle
31 - 40 Isosceles triangle
41 - 50 Isosceles trapezoid
51 - 60 sector
61 - 70 semicircle
71 - 255 parallelogram
25 Framing Mac. Zoom
26 Prism1 0 - 10
11 - 255 Prism Cut-in
27 Prism1 Rot
0 - 127 0° - 360°
128 - 187 CW,Fast→Slow
188 - 195 STOP
196 - 255 CCW,Slow→Fast
28 Prism2 0 - 10
11 - 255 Prism Cut-in
DMX
Note
Functions
Channel Percentage
CCW,Fast→Slow
CW,Slow→Fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
Jitter slow to fast
CCW,Fast→Slow
CW,Slow→Fast
Prism off
Prism off