Light Sky TX0760 User manual

E-mail:
n
Add:No.51 Yunfeng Rd,Xinhua Industrial Zone,Xinhua Street,
Huadu District,Guangzhou,China.
TX0760ZOOM
Please read these user manual carefully before use!

Congratulations on choosing our company product! We thank you for your custom.
◆Please note that this product, as all the others in the rich my company range, has
been designed and made with total quality to ensure excellent performance and
best meet your expectations and requirements.
◆Carefully read this user manual in its entirety and keep it safe for future reference.
It is essential to know the information and comply with the instructions given in this
manual to ensure the fitting is installed, used and serviced correctly and safely.
◆My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried
out in conformity with this user manual, which must always accompany the fitting.
◆My company reserves the right to modify the characteristics stated in this user
manual at any time and without prior notice.
Contents
1. Safety information........................................................................................................2
2. Technical information...................................................................................................4
3. Attachment and body size.........................................................................................6
4. Installation and connecting.......................................................................................7
5. Control panel..............................................................................................................10
6. Menu setting..............................................................................................................11
7. Channel function.........................................................................................................15
8. Circuit connecting diagram.......................................................................................19
9. Cleaning and maintenances.......................................................................................20
10.Troubeshooting..........................................................................................................21
11.Duty exonerative and copyright protection............................................................22

Ensure a minimum clearance of 0.2m around the cooling fans and ventilation.
Please do not install the fixture onto combustible surface.
The double insulation between the LV power supply and the control conductor on the fixture.
The fixture is intended for indoor application.
2
ta40℃
40
Do not expose the front glass to sunlight or other strong light source from any angle.
Lenses can focus the sun's rays inside the fixture, creating a potential fire hazard.
■Mounting surface and fire protection
Keep all combustible materials at least 20 cm away from the fixture.
■This lighting fixture is for professional use only - it is not for household use.
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be prgperly hooked onto the fitting and secured to the framework.
When suspending the fixture, ensure that the supporting structure and all hardware used
can hold at least 10 times the weight of all the devices they support.
SAFETY INFORMATION

The products referred to in this manual conform to the European Community Directives to which
they are subject:
Low Voltage 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
Never look directly into the light source. You risk injury to your retina, which may induce blindness.
Do not look at LEDs with magnifiers, telescopes, binoculars or similar optical instruments that may
concentrate the light output.
Protection optical radiation
Protection against explosion
The protection screen, lens or ultraviolet screen on the lamp can be damaged to the degree
of failure if visible damage, such as a crack or deep mark, should be replaced。
The light source in this xture shall be replaced by the manufacturer or its service agent or
similar qualication.
Always disconnect from mains before replacing the light.
3
tc 60℃ The maximun temperature that can be reached on the external surface of the fitting,
in a thermally steady state,is 60℃ 。
Avoid contact bypersons and materials.
Allow the fixture to cool for at least 5 minutes before handling.
■光源The light source
The product implementation standard.：GB 7000.1-2015 GB7000.217-2008

● ：Power supplies available
100V~240V~ 50/60Hz 5A
● ：Power
495W，PF0.988
● LED chip：
OSRAM 60W，RGBW 4 in 1 LED chip
● 7PCSLED QTY：
● :50000hAverage life
● ：Zoom function min.6.5°,max.50°. Beam angle
● ：RGBW macro color system. Color
● ：1-30 times/ second electronic strobeStrobe
and random strobe.
● ：65536 class dimmerDimmer
● ：Pan、Tilt
X/Y Travel: 540°/220°
X/Y Resolution: 2.11°/0.98°
X/Y Speed: 2.5S/1.0S
● ： Control Mode
DMX512, RDM, Stand-alone mode , ArtNet(optional),
Wireless DMX512(optional)
● ：Channel
Standard(13CH)
Extended(15CH)
Simple Mode(9CH)
HSIC Mode(12CH)
● Focus and Lens
High precision combination lens,linear adjustment
● ：Display Menu
- The display panel adopts a 2.0-inch LCD12864 LCD
screen, which is used in both Chinese and English
languages to facilitate quick operation and browse menus.
- Display board can record device’s using time , show
device’s temperature, channel data and software version .
- Edit the procedure
4
● IP set
Automatic chang battery,IP could be set without
electricity.
● Software upgrade
Insert USB upgrade software.
● IP20 protection/IP20
- Protected against the entry of solid bodies larger
than 12mm.
- No protection against the entry of liquids
● Safety Devices
- BIPOlar circuit breaker with thermal protection.
- Automatic break in power supply in case of
overheating or failed operation of cooling system.
● Cooling
Forced ventilation with axial fans.
● ：Outlooking
adopt ABS anti-fire plastic.
● ：425×300×506Light size
●Box Size ：500X580X375MM
: 21kg ，:25.8kg N.W. G.W.
●(2 sets)： Flycase Size
880X500X640MM
: 42kg ， ：75kg N.W. G.W.
●Color correction because the brightness :
and wavelength of LED light source cannot be completely
the same, there will be color differences between lamps
and lanterns. In order to solve this problem, we use the
method of correction, the output brightness curve of each
color is corrected, after learning the different gamut and
defining a standard gamut, the standard is applied to all
the lamps and lanterns, so as to reduce the color difference
between the lamps and lanterns!
TECHNICAL INFORMATION

5
Distance,spot diameter and illumination diagram
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7010(32'10")
2(6'7")
13.3(43'7")
R
G
B
RBGW
50°Lux(fc) R
G
B
RBGW
6.5°Lux(fc)
Distance m(ft in)
6.5°Diameter m(ft in)
50°Diameter m(ft in)
3(9'10")
0.6(3'7")
4(23'3")
7(23')
1.4(4'7")
9.1(29'10")
5012(466)
10120(941)
12376(221)
28535(2652)
221(21)
398(37)
102(9)
1205(112)
1065(99)
2235(208)
538(50)
6558(609)
49(5)
90(8)
24(2)
256(24)
525(49)
1082(101)
266(25)
3090(287)
31(3)
54(5)
15(1)
146(14)
2150(200)
4256(396)
1155(107)
12253(1139)
83(8)
153(14)
36(3)
450(42)
5(16'5")
1(3'3")
6.6(21'8")
6.5°50°

power cord
6
425 188
506
300
436
ATTACHMENT AND BODY SIZE

Installing the projector- Fig. 3
Safety rope啊
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
7
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
When suspending the fixture, ensure that the supporting structure and all hardware used can
hold at least 10 times the weight of all the devices they support.
Compact,standard clamp system equipped & easy installation
INSTALLATION AND CONNECTING

The L terminal is connected with the brown line.
The N terminal is connected with the blue line.
● After doing the above operation and making sure all the devices had been
installed with natural operate, press the power switch to check whether every
-thing is working normally.
L
NGround
● connection to the eiectricty mains must be carried out by a qualified electrical
installer.
● The stage lighting power supply can not be more than 2pcs pre line
8
power in out out in in power end

9
DMX512 in signal end
out in out in
DMX - output
1 - Shield
2 - Signal (-)
- Signal (+)
- Not connected
- Not connected
3
1
2
3
DMX-input
- Shield
- Signal (-)
- Signal (+)
- Not connected
- Not connected
4
5
4
5
The projector
all the projectors are together
dn’t touch each other or
plinth).
Recommend to use the DMX
nnection.

USB
Display
Up arrowhead : page up
Down arrowhead : page down
Left arrowhead : reduce
Right arrowhead : increase
Enter : OK function
Exit : in the choice screen
DMX: DMX Address Information Personal Manual control
Service Language Reversal
UP
DOWN
LEFT RIGHT
ENTER
CONTROL PANEL
10
Art-Net
ART
NET
ART
NET
● Color Calibration System
Because LED chip’s brightness and wave length can not be produced exactly
same by LED factory, which would cause the color difference in the LED color
fixture. To solve the issue , LIGHT SKY adopts a calibration system by calibrating
each color’s brightness curve and defining a standard color area . then apply this
standard into all the LED fixture to lower the color difference .
So, in MENU Optional of Open Calibration OFF/ON in PERSONAL is available.
Standard production , the Calibration system in ON.
But user can choose OFF as well

Main menu
Ⅰ menu Ⅱ menu Ⅲ menu
MENU SETTING
11
DMX Address :001-512
Information
Totel time
Power :****(h)
Lamp on :****(h)
Lamp hours
Total :****(h)
Lamp open :****(h)
Temperature Board :000.0
RDM UID Undistributed
Fan speed/Voltag
Fan1 1:0000 RPM
Fan2 2:0000 RPM
DMX live
1.Pan (***)
2.Pan (***)
3.TILT (***)
4.TILT Fine (***)
5.Fuction (***)
6.Dimmer (***)
7.Shutter (***)
8.Red (***)
9.Green (***)
10.Blue (***)
11.White (***)
12.Macro (***)
13.ZOOM (***)
System version
XY:V*.**
LED-KZ:V*.**
DIS Board :V*.**
Return(ESC)
Fan mode Normal
mode
Silent mode
Personal
Channel mode
HSIC Mode(12CH)
Extended(15CH)
Standard(13CH)
SimpleMode(9CH)

12
Manual
control
1.Pan (***)
2.Pan Fine (***)
3.TILT (***)
4.TILT Fine (***)
Dimmer Speed-1（fast）
Personal
Dimmer Speed-2
Dimmer Speed-3
Dimmer Speed-1（slow）
P/T invert
Pan invert OFF
ON
Tilt invert
OFF
ON
Return(ESC)
Language
English
Chinese
Display
Back Light
Open
Auto close(15s)
Reversal Normal
Rota.180
Backlight blink ON
OFF
Return(ESC)
Main menu
Ⅰ menu Ⅱ menu Ⅲ menu
Return(ESC)
Dimmer Curve
Dimmer Speed
Dimmer Curve 1
Dimmer Curve 2
Dimmer Curve 3
Dimmer Curve 4
Open calibration OFF
ON
DMX Function
Keep
Black
Sta Scence
Channel control

13
Test
Test P/T STEP ***
Test effect STEP ***
Test all STEP ***
Test all
Return(ESC)
Return(ESC)
Calibration
Pan 000-255
Tilt 000-255
Return(ESC)
Factory
Defualt
Time clean
Developer
Firmware update
Return(ESC)
return (ESC)
DMX/ARTNET First/DMX
ARTNET First/ARTNET
IP
Address
Service
ARTNET
Channel control
5.Fuction (***)
6.Dimmer (***)
7.Shutter (***)
8.Red (***)
9.Green (***)
10.Blue (***)
11.White (***)
12.Macro (***)
13.ZOOM (***)
Return(ESC)
Manual
control
Reset
system reset
Pan/Tilt reset
Head motor reset
Main menu
Ⅰ menu Ⅱ menu Ⅲ menu
Power on time
Lights on time
The total time

ARTNET
Mask Address
Net Address
Sub Net Address Net
Universe Address
return (ESC)
Language
English
Chinese
Reversal Normal
Rota.180
Main menu
Ⅰ menu Ⅱ menu Ⅲ menu
14

15
CHANNEL FUNCTION
DMX
1 0-255 0 -100 Pan
2 0-255 0 -100 Pan Fine
3 0-255 0 -100 TILT
4 0-255 0 -100 TILT Fine
5
Fuction
0 -25 0 -9.8 No Fuction
26 -35 10.2-13.7 Zoom Reset
36 -45 14.1-17.6 P/T Reset
46 -55 18-21.6 All Reset
56 -65 22-25.5 Dimmer Speed1
66 -75 25.9-29.4 Dimmer Speed2
76 -85 29.8 -33.3 Dimmer Speed3
86 -95 33.7-37.3 Dimmer Speed4
96 -255 37.6 -100 No
Fuction
6 0 -255 0 -100 Dimmer
7
Shutter
0-9 0- 3.5 NO Function
10 -49 3.9-19.2 Slow closing， Fast opening， slow → fast
50 -89 19.6-34.9 Fast closing，Slow opening， Slow → Fast
90 -119 35.3- 46.7 Slow closing，Slow open， Slow → Fast
120 -179 47.1-70.2 Random strobe,Slow→ Fast
180 -249 70.6 -97.6 Synchronousstrobe,slow → fast
250-255 98-100 NO Function
8 0 -255 0-100 Red
9 0 -255 0-100 Green
10 0 -255 0-100 Blue
11 0 -255 0-100 White
12 0 -255 0-100 Macro
13
Percentage
function
Channel
Standard(13CH)
0 -255 0-100 ZOOM

Extended(15CH)
DMX
1 0-255 0 -100 Pan
2 0-255 0 -100 Pan Fine
3 0-255 0 -100 TILT
4 0-255 0 -100 TILT Fine
5
Fuction
0 -25 0 -9.8 No Fuction
26 -35 10.2-13.7 Zoom Reset
36 -45 14.1-17.6 P/T Reset
46 -55 18-21.6 All Reset
56 -65 22-25.5 Dimmer Speed1
66 -75 25.9-29.4 Dimmer Speed2
76 -85 29.8 -33.3 Dimmer Speed3
86 -95 33.7-37.3 Dimmer Speed4
96 -255 37.6 -100 No
Fuction
6 0 -255 0 -100 Dimmer
7
Shutter
0-9 0- 3.5 NO Function
10 -49 3.9-19.2 Slow closing， Fast opening， slow → fast
50 -89 19.6-34.9 Fast closing，Slow opening， Slow → Fast
90 -119 35.3- 46.7 Slow closing，Slow open， Slow → Fast
120 -179 47.1-70.2 Random strobe,Slow→ Fast
180 -249 70.6 -97.6 Synchronousstrobe,slow→ fast
250-255 98-100 NO Function
8
0 -255 0-100 Red
9
0 -255 0-100 Green
10
0 -255 0-100 Blue11
0 -255 0-100 White
12
0 -255 0-100 Macro
13
Percentage
function
Channel
0 -255 0 -100 Dimmer fine
16
14
15
4-255
0 -255
0-100 ZOOM
0 -30-1.18
1.57-100
NO Function
2000K-10000K
CCT

SimpleMode(9CH)
DMX
1 0-255 0 -100 Pan
2 0-255 0 -100 Pan Fine
3 0-255 0 -100 TILT
4 0-255 0 -100 TILT Fine
5
Fuction
0 -25 0 -9.8 No Fuction
26 -35 10.2-13.7 Zoom Reset
36 -45 14.1-17.6 P/T Reset
46 -55 18-21.6 All Reset
56 -65 22-25.5 Dimmer Speed1
66 -75 25.9-29.4 Dimmer Speed2
76 -85 29.8 -33.3 Dimmer Speed3
86 -95 33.7-37.3 Dimmer Speed4
96 -255 37.6 -100 No
Fuction
6 0 -255 0 -100 Dimmer
7
Shutter
0-9 0- 3.5 NO Function
10 -49 3.9-19.2 Slow closing， Fast opening， slow → fast
50 -89 19.6-34.9 Fast closing，Slow opening， Slow → Fast
90 -119 35.3- 46.7 Slow closing，Slow open， Slow → Fast
120 -179 47.1-70.2 Randomstrobe,Slow→ Fast
180 -249 70.6 -97.6 Synchronousstrobe,slow→ fast
250-255 98-100 NO Function
Percentage
function
Channel
17
8
90 -255 0-100 ZOOM
4-255
0 -30-1.18
1.57-100
NO Function
2000K-10000K
CCT

DMX
1 0-255 0 -100 Pan
2 0-255 0 -100 Pan Fine
3 0-255 0 -100 TILT
4 0- 255 0 -100 TILT Fine
5
Fuction
0 -25 0 -9.8 No Fuction
26 -35 10.2-13.7 Zoom Reset
36 -45 14.1-17.6 P/T Reset
46 -55 18 -21.6 All Reset
56 -65 22 -25.5 Dimmer Speed1
66 -75 25.9 -29.4 Dimmer Speed2
76 -85 29.8 -33.3 Dimmer Speed3
86 -95 33.7-37.3 Dimmer Speed4
96 -255 37.6 -100 No
Fuction
6 0 -255 0 -100
7
Shutter
0-9 0- 3.5 NO Function
10 -49 3.9-19.2 Slow closing， Fast opening， slow → fast
50 -89 19.6-34.9 Fast closing，Slow opening， Slow → Fast
90 -119 35.3- 46.7 Slow closing，Slow open， Slow → Fast
120 -179 47.1-70.2 Randomstrobe,Slow→ Fast
180 -249 70.6 -97.6 Synchronousstrobe,slow→ fast
250-255 98-100 NO Function
8
9
10
Percentage
function
Channel
0 -255 0 -100
HSIC Mode(12CH)
0 -255 0 -100
0 -255 0 -100
Hue
Hue fine
Satura t i o n
Dimmer
CCT
11 0-3
4-255
0-1.18
1.57-100 2000K-10000K
NO Function
0 -255 0-100 ZOOM
12
18

19
CIRCUIT CONNECTING DIAGRAM
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
0160-FG2
V1.0
+ + + +
TEM
20170831
- - - -
+
+
+
+
-
-
-
-B
W R
P1
P4
P8
P5
UU UU
D1
7A 250V
1
J1
7A 250V
1
J2
1
J3
LED MT2
+
Update PWM
MT1
FAN2FAN1
TEM
20171205
V1.2
0760-KZ2
BUS
INPUT
MT3
H13mm
1
J8
1
J6
1
1
J4
1
J2
H:16MM
H:16MM
1
J9
4A
J1
4A
J7
J3
1
J11
3A 250V
J10
28V IN
28V OUT