Light Sky PEARL WASH User manual

PEARL WASH
Please read these user manual carefully before use!
E-mail:
n
Address: No. 43, Yunfeng Road, Xiuquan Street,
Huadu District, Guangzhou, China

-1-
Contents
1. Safety information.......................................................................................................2
2. Technical information...................................................................................................4
3. Attachment and body size.........................................................................................6
4. Installation and connecting.......................................................................................7
5. Control panel..............................................................................................................9
6. Menu setting...............................................................................................................10
7. Channel function.........................................................................................................12
8. Circuit connecting diagram.......................................................................................17
9. Cleaning and maintenances.......................................................................................18
10.Troubeshooting..........................................................................................................19
11.Duty exonerative and copyright protection............................................................20
Congratulations on choosing our company product! We thank you for your custom.
◆Please note that this product, as all the others in the rich my company range, has
been designed and made with total quality to ensure excellent performance and
best meet your expectations and requirements.
◆Carefully read this user manual in its entirety and keep it safe for future reference.
It is essential to know the information and comply with the instructions given in this
manual to ensure the fitting is installed, used and serviced correctly and safely.
◆My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried
out in conformity with this user manual, which must always accompany the fitting.
◆My company reserves the right to modify the characteristics stated in this user
manual at any time and without prior notice.

-2-
ta40℃
■This lighting fixture is for professional use only - it is not for household use；
■lnstallation
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be prgperly hooked onto the fitting and secured to the framework.
When suspending the fixture, ensure that the supporting structure and all hardware used
can hold at least 10 times the weight of all the devices they support.
■Mounting surface and fire protection
Please do not install the luminaire directly on the surface of combustible substances.
Keep all flammable materials at least 20cm away from light fixtures.
There should be no obstructions at least within 20cm of the fan or ventilation on the luminaire.
Do not expose the front glass to sunlight or other strong light sources from any angle.
The lens can focus the sun's rays into the fixture, creating a potential fire hazard.
■Maximum ambient temperature
This luminaire is suitable for indoor use, and protective devices are added for outdoor use.
If the ambient temperature (Ta) exceeds 40 ℃, please do not operate this luminaire.
■Protection against electrical shock
The ground wire of the power supply system must be effectively grounded
(standard EN 60598-1).
In addition, it is recommended that you use an appropriately sized leakage circuit breaker to
protect the power cord of the luminaire from being indirectly grounded or short-circuited to
ground.
■Connection to mains supply
Double insulation employed between LV power and control conductors on luminaires.
The bus to which the power supply is connected must be installed by a qualified professional
technician.
Check whether the bus frequency and voltage are consistent with the values marked on the
label on the luminaire, that is, consistent with the design values of the luminaire.
The label also gives the input power, you need to refer to the calculation of the maximum
number of lamps
hat can be connected to the wire to avoid overloading.
Do not use the power cord with damaged insulation.
When the power cord of the luminaire is found to be damaged, it must be replaced by the
manufacturer or dealer or a qualified person to avoid danger.
When the 110V-power supply is used, the interconnection of the luminaire shall not exceed 5;
when the 220V-power is supplied, the interconnection of the luminaire shall not exceed 10.

-3-
tc 80℃ ■Temperature of the external surface
The maximun temperature that can be reached on the external surface of the fitting,
in a thermally steady state,is 80℃about。
Avoid contact bypersons and materials.
Allow the fixture to cool for at least 5 minutes before handling.
■Maintenance
Before starting any maintenance work or cleaning the luminaire, the power supply to
the luminaire must be disconnected.
■The light source
The light source in this luminaire should be replaced by the manufacturer or its service
agent or a similarly qualified person. Always switch off the power supply
before replacing the light source.
■Protection against explosion
The protective screen, lens or UV screen on the luminaire should be replaced if there
is visible damage, that is, damage to the extent of failure, such as cracks or deep marks.
■Protection optical radiation
Never look directly into the light source. You risk injury to your retina, which may
induce blindness.
Do not look at LEDs with magnifiers, telescopes, binoculars or similar optical
instruments that may concentrate the light output.
The products referred to in this manual conform to the European Community Directives to which
they are subject:
Low Voltage 2014/35/EU
Electromagnetic Compatibility 2014/30/EU
The product implementation standard：GB 7000.1-2015 GB7000.217-2008

-4-
Electrical specifications and connections
● Power supply: Electronic auto-ranging
● Input voltage range: 100-240V 50/60Hz；
● Power rating：500W PF985；
● Power in connector: Neutrik power
● DMX and RDM data in/out: Locking 3-pin (optional:5-pin XLR)
SOURCE
● Light source: 12×40W RGBL LED
(optional : 12×40W RGBW LED )
● Median Lifetime: 30000 h
OPTICAL SYSTEM
● Beam range: 7-55°
● High precision combination structure, high permeable
glass light rod +PMMA lens
● Light output: 45514 lux @3m
DYNAMIC EFFECTS
● Colour mixing mode : RGBL (optional: RGBW)
● Colour rainbow effect with variable speed
● CTO Light output:2200 K - 8000K
● Beam : small degrees beam effect
● Wash : middle and big degrees wash
● FX mode： kaleidoscope effects
● Zoom system：Linear electric zoom
● Lens rotation
Front lens can rotated infinity
● Multi-point control (at least 3 LED chips) effect
● Ring control effect
● Fade in and out gradient effect(at least 3 LED chips)
● Effect macro：Static effect macro functions and
Dynamic effects macro function
● Adjustable speed of effect macro function
● Strobe:Pre-programmed random strobe & pulse effects
(0.5-25Hz/second)
● Dimmer: 0-100％ linear adjustment，High resolution
electronic dimming
MOVEMENT
● Pan/ Tilt movement: 540°/270°
● Pan / Tilt Resolution：2.11°/1.05°
Pan/Tilt : Standard and speed adjustable
● Automatic Pan / Tilt position correction
CONTROL AND PROGRAMMING
● RDM two-way data transmission,Remote reset DMX address
● Display: The display panel adopts a 1.77-inch TFT screen
● Intelligent control：Display board can record
device’s using time , showdevice’s temperature, channel
data and software version .
● Error alarm：Automatic alarm for fixture failure
● Software upgrade:Upgrade with DMX
● Protocols: DMX-512, RDM
● Control channels: 26CH(Standard), 38CH(extended)
See the channel table for details
THERMAL SPECIFICATION
● Maximum ambient temperature: 40 °C
● Maximum housing temperature: 80 °C
● Minimum operating temperature: -20 °C
MECHANICAL SPECIFICATION
● Structure:The fixture adopted heat-proof engineering
plastics and module pressing alloy materials.
● Integrated folding lamp hook design, more convenient for
disassembly and transportation.
● Ingress protection rating: IP20
● Product dimension: 334mm×218.5mm×479mm
● Box Size (1 sets)：410mm×290mm×575mm
N.W.: 15.3Kg ，G.W.:17.6Kg
● Flycase Size (2 SETS)：660X500X720MM
N.W.: 30.6Kg ，G.W.:62.1Kg

-5-
Distance,spot diameter and illumination diagram
55°Lux(fc)
R
G
B
L
RBGL
R
G
B
L
RBGL
6115(568.3)
16711(1553)
3150(292.8)
23600(2193)
45514(4230)
332(30)
894(83.1)
191(17.8)
1136(105.6)
2100(195.2)
1381(128.3)
3928(365.1)
751(69.8)
5585(519.1)
10343(961.3)
72(6.7)
215(20)
42(3.9)
256(23.8)
398(37)
554(51.5)
1576(146.5)
302(28.1)
2238(208)
4110(382)
33(2)
102(4)
20(0.1)
97(5)
162(9)
2204(204.8)
6282(583.8)
1194(111)
8935(830.4)
16549(1538)
97(9)
390(36.2)
75(7)
466(43.3)
703(65.3)
7°Lux(fc)
1m
2m
3m
4m
5m
5m
4m
3m
2m
1m
0
6m
10(32'10")
1.4(4'7")
10(32'10")
Distance m(ft in)
7°Diameter m(ft in)
55°Diameter m(ft in)
3(9'10")
0.40(1'1")
2.98(9'9")
7(23')
1.0(3'3")
7(22'12")
5(16'5")
0.7(2'4")
5(16'5")
7°
5°5

-6-
power cord
ATTACHMENT AND BODY SIZE

-7-
Installing the projector- Fig. 3
The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
INSTALLATION AND CONNECTING

-8-
● After doing the above operation and making sure all the devices had been
installed with natural operate, press the power switch to check whether every
-thing is working normally.
● connection to the eiectricty mains must be carried out by a qualified electrical
installer.
● The stage lighting power supply can not be more than 3pcs pre line,
different types of lamps are connected as follows:
The L terminal is connected with the brown line.
The N terminal is connected with the blue line.
L
NGround
power in out power end
out in in

-9-
DMX512 in
signal end
outout in in
Up arrowhead:page up
Down arrowhead:page down
Left arrowhead:reduce
Right arrowhead:increase
Enter:OK function
Exit:in the choice screen
Display
1.DMX settings 2.Information 3.Personal 4.Manual control 5.Service

-10 -
Main menu I menu II menu III menu
DMX
Setting →
Address:
001-512
Channel → Standar
Extend
Stae →
Blackout
Auto
Hold
Info →
Total time → ****H
Light time → ****H
Temperature → **℃
Fan1
speed → ****R
Fan2
speed → ****R
Fixture
state →
MCU 1(XY)
→
OK/OFF
MCU 2(Zoom) OK/OFF
Pan
state OK/OFF
Tilt
state OK/OFF
Zoom state OK/OFF
Zoom
Rot. state OK/OFF
DMX
Live →
1.Pan
000/255
2.Pan
Fine 000/255
3.Tilt
000/255
4.Tilt
Fine 000/255
5.Function
000/255
6.Dimmer
000/255
7.Dimmer
Fine 000/255
8.Strobe
000/255
9.Red
000/255
10.Green
000/255
11.Blue 000/255
12.Lemon Green
000/255
13.Colo Maorro 000/255
15.Effect Macro 000/255
16.Effect
Speed 000/255
17.Effect
Fade 000/255
18.Dimmer Back. 000/255
19.Dimmer
fine Back 000/255
20.Strobe
Back. 000/255
21.Red
Back. 000/255
22.Green Back. 000/255
23.Blue
Back. 000/255
24.Lemon Green
Back. 000/255
25.Zoom
000/255
26.Zoom
Rot. 000/255
Display
Ver V*.**
XY
Ver V*.**
Device
Ver V*.**
Person →
MS Mdoe → Master
Slave
Pan
Invert → OFF
ON
Tilt Invert → OFF
ON
Led Hz →
3000Hz
6000Hz
12000Hz
24000Hz
Dimmer Curve →
Scurve
Linear
Square
I-Square
Dimmer Speed → Fade
Snqp
14.CCT 000/255

-11 -
Main menu I menu II menu III menu
Fan mode →
Silent
Standar
Hot.
Language → Chinese
English
Display Back. → OFF
ON
Display Dir. → Forward
Reverse
Manual →
Channel →
1.Pan 000/255
2.Pan Fine 000/255
3.Tilt 000/255
4.Tlit Fine 000/255
5.Function 000/255
6.Dimmer 000/255
7.Dimmer fine 000/255
8.Strobe 000/255
9.Red 000/255
10.Green 000/255
11.Blue 000/255
12.Lemon Green
000/255
13.Color Macro 000/255
15.Effect Macro 000/255
16.Effect Speed 000/255
17.Effect Fade 000/255
18.Dimmer Back. 000/255
19.Dimmer fine Back. 000/255
20.Strobe Back. 000/255
21.Red
Back.
000/255
22.Green Back. 000/255
23.Blue
Back.
000/255
24.Lemon Green
Back. 000/255
25.Zoom 000/255
26.Zoom Rot 000/255
Reset →
PanTilt
Zoom module
ALL
Servion →
Adjust →
Pan 000/255
Tilt 000/255
Zoom 000/255
Zoom Rot. 000/255
Red-1 000/255
Green-1 000/255
Blue-1 000/255
Lemon Green -1 000/255
Green-2 000/255
Green-2 000/255
Blue-2 000/255
Lemon Green -2 000/255
Red-3 000/255
Green-3 000/255
Blue-3 000/255
Lemon Green-3 000/255
Red-4 000/255
Green-4 000/255
Blue-4 000/255
Lemon Green-4 000/255
Factory Reset → ****
Reset timers → ****
Developer
14.CCT 000/255

-12 -
CHANNEL FUNCTION(V1.0)
Channel Value/DMX percentage Function Note
26CH
1PAN
0-255 0%...100%
2PAN FINE
0-255 0%...100%
3TILT
0-255 0%...100%
4TILT
FINE
0-255 0%...100%
5
FUNCTION
Reset
6DIMMER
0-255 Dimmer 0%...100%
70-127
128-255
8
Strobe
0-3 Light ON
4-103 Strobe Frequency
104-107 Light ON
108-207 Pulsation
208-212 Light ON
213-225 Random Slow
226-238 Random Medium
239-251 Random Fast
252-255 Light ON
9RED
0-255 0-100% Red dimmer from dark to bright
10 GREEN
0-255 0-100% green dimmer from dark to bright
11 BLUE
0-255 0-100% Blue dimmer from dark to bright
12 LimeGreen
0-255 0-100% LimeGreen dimmer from dark to bright
13 Color
Macro
0-255 Color Macro
14
CCT
0-9No
Fuction
10-19 2200K
20-29 2800K
30-39 3000K
40-49 3200K
50-59 4000K
60-69 4800K
70-79 5600K
80-89 6000K
90-99 7000K
100-255 8000K
No Fuction
Dimmer 0%...100%
DIMMER
128-255
0-127

-13 -
Channel Value/DMX percentage Function Note
15
Effect Macro
0-10 No Fuction
11-20 Macro1
21-30 Macro2
31-40 Macro3
41-50 Macro4
51-60 Macro5
61-70 Macro6
71-80 Macro7
81-90 Macro8
91-100 Macro9
101-110 Macro10
111 -120 Macro11
121-130 Macro12
131-255 No Fuction
16
Effect Speed
0-125 Macro Speed from slow to fast
126-129 Macro Stop
130-255 Macro Speed from fast to slow
17 Effect
Fade
0-255 0-100%
18 Dimmer
Back
0-255 Dimmer Back 0%...100%
19 Dimmer
Fine
Back
0-255 Dimmer
Fine
Back 0%...100%
20 Strobe
Back
0-255 Macro Speed from slow to fast
21 Red Back
0-255 0-100% Red dimmer from dark to bright
22 Green
Back
0-255 0-100% Green dimmer from dark
to bright
23 Blue
Back
0-255 0-100% Blue dimmer from dark to bright
24 Lime green
0-255 0-100% lemon green from dark to light to dark
25 Zoom
0-255 0-100% Mix to Max
26
Zoom ROTA
0-100 0-100% Run_mode_normal 0° - 360°
101-190 Cw Rotation
191-192 Run_mode_stop
193-255 Ccw Rotation

-14 -
Channel Value/DMX percentage Function Note
38CH
1PAN
0-255 0%...100%
2PAN FINE
0-255 0%...100%
3TILT
0-255 0%...100%
4TILT FINE
0-255 0%...100%
5
FUNCTION
0-127 No Fuction
128-255 Reset
6DIMMER
0-255 Dimmer 0%...100%
7DIMMER
FINE
0-4 Dimmer Fine 0%...100%
8
Strobe
0-3 Light ON
4-103 Strobe Frequency
104-107 LightON
108-207 Pulsation
208-212 LightON
213-225 Random Slow
226-238 Random Medium
239-251 Random Fast
252-255 LightON
9RED-1
0-255 0-100% Red dimmer from dark to bright
10 GREEN-1
0-255 0-100% green dimmer from dark to bright
11 BLUE-1
0-255 0-100% Blue dimmer from dark to bright
12 Lime GREEN -1
0-255 0-100%
Lime green
dimmer from dark to bright
13 RED-2
0-255 0-100% Red dimmer from dark to bright
14 GREEN-2
0-255 0-100% green dimmer from dark to bright
15 BLUE-2
0-255 0-100% Blue dimmer from dark to bright
16 Lime GREEN -2
0-255 0-100% Lime green dimmer from dark to bright
17 RED-3
0-255 0-100% Red dimmer from dark to bright
18 GREEN-3
0-255 0-100% green dimmer from dark to bright
19 BLUE-3
0-255 0-100% Blue dimmer from dark to bright

-15 -
Channel Value/DMX percentage Function Note
20 Lime GREEN -3
0-255 0-100% Lime green dimmer from dark to bright
21 RED-4
0-255 0-100% Red dimmer from dark to bright
22 GREEN-4
0-255 0-100% green dimmer from dark to bright
23 BLUE-4
0-255 0-100% Blue dimmer from dark to bright
24 Lime GREEN -4
0-255 0-100% Lime green dimmer from dark to bright
25 Color
Macro
0-255 Color Macro
26
CCT
0-9No
Fuction
10-19 2200K
20-29 2800K
30-39 3000K
40-49 3200K
50-59 4000K
60-69 4800K
70-79 5600K
80-89 6000K
90-99 7000K
100-255 8000K
27
Effect
Macro
0-10 No Fuction
11-20 Macro1
21-30 Macro2
31-40 Macro3
41-50 Macro4
51-60 Macro5
61-70 Macro6
71-80 Macro7
81-90 Macro8
91-100 Macro9
101-110 Macro10
111 -120 Macro11
121-130 Macro12
131-255 No Fuction
28
Effect Speed
0-125 Macro Speed from slow to fast
126-129 Macro Stop
130-255 Macro Speed from fast to slow
29 Effect Fade
0-255 0-100%
30 Dimmer Back
0-255 Dimmer Back 0%...100%
31 Dimmer Fine Back
0-255 Dimmer Fine Back 0%...100%

-16 -
Channel Value/DMX percentage Function Note
32 Strobe Back
0-255 Macro Speed from slow to fast
33 Red Back
0-255 0-100% Red dimmer from dark to bright
34 Green Back
0-255 0-100% Green dimmer from dark to bright
35 Blue Back
0-255 0-100% Blue dimmer from dark to bright
36 Lime green
Back
0-255 0-100% Lime green dimmer from dark to bright
37 Zoom
0-255 0-100% Mix to Max
38
Zoom ROTA
0-100 0-100% Run_mode_normal 0° - 360°
101-190 Cw Rotation
191-192 Run_mode_stop
193-255 Ccw Rotation

-17 -

-18 -
■1.In order to ensure the projector could work normally. It should be kept clean always .
The lens should also be regularly cleaned to maintain an optimum light output.
Do not use any type of solvent on lens. It will damage the projector.
■2.Suggestion: The continue usage of the light don't exceed 4 hours. Or it will shorter the
usage of the lamp. Please use the alternative operation to solve this problem.
The fixture power ON time is best not over 48 hours, or it would generate lamp
protection procedure.
■3.Please disconnect the power supply when begin to maintenance take down the light.
Please let the parts cool down 10 minute at least then begin to install.
■4.Please inspect the lens or other moving parts timing and keep them clear and static.
If find anything damaged or looseness must change a lamp or fix the lamp in order to
avoid the accident.
Please check the machenical parts is jamging.After cleaning,please add some
temperature -durable juice.
■5.The light use the strong cool system.It iseasy for the dirty to be colletced.Please do
clear the hot-sak one time two week at least.
■6. After you use the light,please check the intake place whether there are some wastepaper,
please clean it up,or the windmill will break down and causing fire.
CAUTION!
Disconnect from mains before starting maintenance operation.
CLEANING AND MAINTENANCES

-19 -
It is recommended some solution for some normal trouble shooting. Any inextricability
problems should always be handling by the professional person. Disconnect the power
supply before maintenance the light.
■ LE D off / LED：
1.Please check if install the suitable voltage.
2.Please check whether the led will reach the end of their life can explode; please
replace a same description led.
3.Please check if the power supply is enough.
4.Please check whether the D MX 512 controller pass the "turn on" order.
■The light couldn't accept the control order:
1.Please check the start code address and the function option are correct.
2.Please check whether the communicate control cable is on good connection or the
cable is too long or interrupt.
3.Please check the control system is not valid, check the signal amplifier of chain
connected is valid.
4.Please check whether the communicate cable is too long or the other equipment is
mutually conjugate.
5.Please arrange the wire well, shorter the signal cable, put the high voltage cable
and low voltage cable separately.
6.Add the signal amplify isolator.
7.Signal cable is used the excellent screening doublet (Resistance 75 OHM）.
8.The end of the light end and the end resistance.
■The light can't move:
1.Please check if the power supply is suitable for the light voltage data.
2.Please check the light if they are deformation, inside parts is broken, become wet
etc will lead the loose contact.
3.Please check the if the iniside lead wire and the connector is loose.
4.Please check the electric parts(such as the transformer,PCB board,contrller) is
short-circuit or burn down.
■
1.
2.
3.
4.