Motorola solutions APX Next PMPN4640 User manual

APX Next Vehicle Charger
PMPN4640_ User Guide
*MN009407A01*
MN009407A01-AA
OCTOBER 2022
© 2022 Motorola Solutions, Inc. All rights reserved

Safety and Legal
This section provides the safety and legal information for this product.
Intellectual Property and Regulatory Notices
Copyrights
The Motorola Solutions products described in this document may include copyrighted Motorola
Solutions computer programs. Laws in the United States and other countries preserve for Motorola
Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted
Motorola Solutions computer programs contained in the Motorola Solutions products described in this
document may not be copied or reproduced in any manner without the express written permission of
Motorola Solutions.
No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, without the prior written
permission of Motorola Solutions, Inc.
Trademarks
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
License Rights
The purchase of Motorola Solutions products shall not be deemed to grant either directly or by
implication, estoppel or otherwise, any license under the copyrights, patents or patent applications
of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by
operation of law in the sale of a product.
Open Source Content
This product may contain Open Source software used under license. Refer to the product installation
media for full Open Source Legal Notices and Attribution content.
European Union (EU) and United Kingdom (UK) Waste of Electrical and
Electronic Equipment (WEEE) Directive
The European Union's WEEE directive and the UK's WEEE regulation require that products sold
into EU countries and the UK must have the crossed-out wheelie bin label on the product (or the
package in some cases). As defined by the WEEE directive, this crossed-out wheelie bin label means
that customers and end-users in EU and UK countries should not dispose of electronic and electrical
equipment or accessories in household waste.
Customers or end-users in EU and UK countries should contact their local equipment supplier
representative or service centre for information about the waste collection system in their country.
Disclaimer
Please note that certain features, facilities, and capabilities described in this document may not be
applicable to or licensed for use on a specific system, or may be dependent upon the characteristics of
MN009407A01-AA
Safety and Legal
2

a specific mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola
Solutions contact for further information.
© 2022 Motorola Solutions, Inc. All Rights Reserved
Supplier's Declaration of Conformity
Supplier's Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Name: Motorola Solutions, Inc.
Address: 2000 Progress Pkwy, Schaumburg, IL. 60196
Phone Number: 1-800-927-2744
Hereby declares that the product:
Model Name: APX Next Vehicle Charger
conforms to the following regulations:
FCC Part 15, subpart B, and section 15.109(a)
Class B Digital Device
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1This device may not cause harmful interference, and
2This device must accept any interference received, including interference that may cause unde-
sired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio or TV technician for help.
MN009407A01-AA
Safety and Legal
3

Safety and General Information
WARNING:
All batteries can cause property damage and/or bodily injury such as burns if a conductive
material such as jewelry, keys or beaded chains touches exposed terminals. The material may
complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a pocket, purse or other container with metal
objects.
Do not replace or charge batteries in potentially explosive atmosphere. Contact sparking may
occur while installing or removing batteries and cause an explosion.
Due to the risk of electrical shock or other physical injury, do not insert your hands into the
charger pocket.
Product Safety and RF Exposure Compliance
CAUTION: Before using this product, read the Product Safety and RF Exposure booklet
enclosed with your radio which contains important operating instructions for safe usage and
RF energy awareness and control for Compliance with applicable Standards and Regulations.
Operational Warnings
Vehicles With Air Bags
WARNING:
• Do not place a portable radio or install radio communications equipment in the area over an
air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio
is placed in the air bag deployment area and the air bag inflates, the radio may be propelled
with great force and cause serious injury to occupants of the vehicle.
• Installation of vehicle communication equipment should be performed by a qualified
professional installer or technician. Air bag size, shape, and deployment area can vary by
vehicle make, model, and front compartment configuration such as bench seat, bucket seats
and others.
• Contact the vehicle manufacturer corporate headquarters, if necessary, for specific air bag
information for the vehicle make, model, and front compartment configuration involved in
your communication equipment installation.
Blasting Caps and Blasting Areas
WARNING: To avoid possible interference with blasting operations, turn off your radio and
remove it from the charger when you are near electrical blasting caps, in a blasting area, or in
areas posted: “Turn off two-way radio.” Obey all signs and instructions.
Operational Cautions
Efficient System Operation
CAUTION:
• All equipment must be properly grounded according to Motorola Solutions installation
instructions for safe operation.
• All equipment should be serviced only by an authorized technician.
MN009407A01-AA
Safety and Legal
4

Warranty Replacement
Motorola Solutions warrants the Vehicle Charger against defects in material and workmanship under
normal use and service for a period of one year from shipment.
Items will be repaired or replaced free of charge for the full warranty period. Freight charges to and
from the place where warranty replacement is provided shall be the customer’s responsibility. Motorola
Solutions is not responsible in any way for defects or damages caused by to the product resulting from
the following causes:
• Defects or damage resulting from use of the product in other than its normal operation as specified
in the instruction manual.
• Defects or damage from misuse, accident, or neglect.
• Defects or damage from improper disassembly, testing, operation, maintenance, installation,
adjustment, alteration, repair, or any modification by the Customer or any person without prior
written consent of Motorola Solutions.
MN009407A01-AA
Warranty Replacement
5

Contact Us
The Centralized Managed Support Operations (CMSO) is the primary contact for technical support
included in your organization's service agreement with Motorola Solutions.
Service agreement customers should be sure to call the CMSO in all situations listed under Customer
Responsibilities in their agreement, such as:
• Before reloading software
• To confirm troubleshooting results and analysis before taking action
Your organization received support phone numbers and other contact information appropriate for your
geographic region and service agreement. Use that contact information for the most efficient response.
However, if needed, you can also find general support contact information on the Motorola Solutions
website, by following these steps:
1Enter motorolasolutions.com in your browser.
2Ensure that your organization's country or region is displayed on the page. Clicking or tapping the
name of the region provides a way to change it.
3Select "Support" on the motorolasolutions.com page.
Comments
Send questions and comments regarding user documentation to
[email protected].
Provide the following information when reporting a documentation error:
• The document title and part number
• The page number or title of the section with the error
• A description of the error
Motorola Solutions offers various courses designed to assist in learning about the system. For
information, go to https://learning.motorolasolutions.com to view the current course offerings and
technology paths.
MN009407A01-AA
Contact Us
6

Icon Conventions
The documentation set is designed to give the reader more visual clues. The following graphic icons
are used throughout the documentation set.
DANGER: The signal word DANGER with the associated safety icon implies information that, if
disregarded, will result in death or serious injury.
WARNING: The signal word WARNING with the associated safety icon implies information that,
if disregarded, could result in death or serious injury, or serious product damage.
CAUTION: The signal word CAUTION with the associated safety icon implies information that,
if disregarded, may result in minor or moderate injury, or serious product damage.
CAUTION: The signal word CAUTION may be used without the safety icon to state potential
damage or injury that is not related to the product.
IMPORTANT: IMPORTANT statements contain information that is crucial to the discussion
at hand, but is not CAUTION or WARNING. There is no warning level associated with the
IMPORTANT statement.
NOTE: NOTICE contains information more important than the surrounding text, such as
exceptions or preconditions. They also refer the reader elsewhere for additional information,
remind the reader how to complete an action (when it is not part of the current procedure,
for instance), or tell the reader where something is on the screen. There is no warning level
associated with a notice.
MN009407A01-AA
Icon Conventions
7

Style Conventions
The following style conventions are used:
Convention Description
Bold This typeface is used for names of, for instance, windows, buttons,
and labels when these names appear on the screen (example: the
Alarms Browser window). When it is clear that we are referring to, for
instance, a button, the name is used alone (example: Click OK).
Monospacing font
in bold
This typeface is used for words to be typed in exactly as they are
shown in the text (example: In the Address field, type http://
ucs01.ucs:9080/).
Monospacing font This typeface is used for messages, prompts, and other text displayed
on the computer screen (example: A new trap destination has
been added).
<Monospacing font
in bold Italic>
This typeface is used with angle brackets as placeholders for a specif-
ic member of the group that the words represent (example: <router
number>).
NOTE: In sequences to be typed in, the angle brackets
are omitted to avoid confusion whether to include the angle
brackets in the text to be typed.
CAPITAL LETTERS This typeface is used for keyboard keys (example: Press Y, and then
press ENTER).
Italic This typeface is used for citations. A citation usually is the name of a
document or a phrase from another document (example: Dimetra IP
System Overview).
→ An → (arrow pointing right) is used for indicating the menu or tab
structure in instructions on how to select a certain menu item (exam-
ple: File→Save) or a certain sub-tab.
MN009407A01-AA
Style Conventions
8

Contents
Safety and Legal..........................................................................................................2
Intellectual Property and Regulatory Notices.................................................................................2
Supplier's Declaration of Conformity..............................................................................................3
Safety and General Information.....................................................................................................4
Product Safety and RF Exposure Compliance................................................................... 4
Operational Warnings......................................................................................................... 4
Operational Cautions.......................................................................................................... 4
Warranty Replacement............................................................................................... 5
Contact Us................................................................................................................... 6
Icon Conventions........................................................................................................ 7
Style Conventions.......................................................................................................8
Chapter 1: Vehicle Charger Overview................................................................... 10
1.1 Vehicle Charger Specification................................................................................................11
1.2 Motorola Solution Authorized.................................................................................................12
Chapter 2: Securing the Radio in the Vehicle Charger........................................13
Chapter 3: Operating the Vehicle Charger............................................................16
3.1 Charging Indicators................................................................................................................16
MN009407A01-AA
Contents
9

Chapter 1
Vehicle Charger Overview
The vehicle charger kit is used for charging a radio or battery alone when inside a vehicle. The vehicle
charger kit includes a mounting bracket to mount the unit inside the vehicle and wire harness.
NOTE: Vehicle Repeater System (VRS) status LED and VRS status toggle switch are only used
when there is a repeater and radio is not inserted.
Figure 1: Top View of the Vehicle Charger
2
3
1
Item Description
1 Charger status LED
2 VRS Status LED
3 VRS status toggle switch - allows you to enable the repeater when no radio
is present
Figure 2: Bottom View of the Vehicle Charger
1
2
3
MN009407A01-AA
Chapter 1 : Vehicle Charger Overview
10