Nav TV AVBMW User manual

Telephone: + 44 (0)870 801 0440
Fax telephone: + 44 (0)870 801 0441
[email protected]
Unit R4
Capital Business Park
Wentloog
Cardiff
CF3 2PU
AVBMW
NAV TV (UK) LTD
NAV TV (UK) LTD
A/V INPUT-OUTPUT LOOM &
REVERSE CAMERA INPUT
BMW
With TV Tuner
Disclaimer
NAV TV (UK) Ltd is not liable for any incidental, consequential or indirect damages. In case of erratic behavior of the vehicle’s electrical
system please disconnect the NAV TV product and contact our technical support Team. NAV TV (UK) Ltd does not assume liability for any
diagnostic fees.

LOCATION & REMOVAL INSTALLATION
Installation is made at the factory TV Tuner,
Locate TV Tuner box in rear of vehicle:
E39 5 Series E38 7 Series
E46 3 Series Convertible E46 3 Series Saloon/Coupe
E83 X3 E53 X5
To select your added A/V input you will need to select
Television, then from the program list (in the blue
banner) select the a/v channel bellow channel 1.
The camera input will appear over any source on the
screen when the reverse gear is selected. (provided the
installation is made as directed)
OPERATING INSTRUCTIONS
1. Remove the white Plug from the white Socket located
on the TV Tuner box,
2. Insert the NAV TV A/V input-output loom into the white
Socket on the TV Tuner,
3. Insert the BMW white Plug into the NAV TV A/V input-
output loom,
4. Connect audio and video connections as required;
(Audio / video inputs and outputs are labelled)
5.Connect your camera output to the socket labelled
CAMERA IN
To activate the camera input you will need to supply a
NEGATIVE feed to PIN 17 on the BLUE plug of the TV
Tuner, see diagrams;
CAMERA INPUT IS IN NTSC FORMAT ONLY