Nilfisk-Advance Topax Hygiene System User manual

Vers. 1.0 –01.01.2012
User Guide
Topax Hygiene System
S Booster MP44/MP66/MP88

Vers. 1.0 –01.01.2012
Contents
1. Preface .............................................................................................................. 3
1.0 Application .................................................................................................. 3
1.1 Warnings..................................................................................................... 3
1.2 Safety Instructions....................................................................................... 4
2. Standard Unit ..................................................................................................... 5
3. Description of Function....................................................................................... 6
3.0 Flow Chart................................................................................................... 6
4. Installation.......................................................................................................... 7
4.0 General ....................................................................................................... 7
4.1 Mounting ..................................................................................................... 7
4.2 Pipe Work ................................................................................................... 7
4.3 Priming........................................................................................................ 8
4.4 Electric connection...................................................................................... 8
5. Function ............................................................................................................. 9
5.0 Operational Instructions .............................................................................. 9
5.1 Operation of Booster controller.................................................................... 9
5.2 Systemsicherheit......................................... Error! Bookmark not defined.
6. Technical Data ................................................................................................. 10
7. Maintenance .................................................................................................... 11
7.0 Instructions............................................................................................... 11
7.1 Trouble shooting and Remedy .................................................................. 11
8. Components..................................................................................................... 12
8.0 Exploded Drawing Booster MP Unit with Spare Spart List......................... 12
9. Warranty .......................................................................................................... 14
Subject to errata

1. Preface
The S Booster is designed for the boosting and transfer of clean water to cleaning
equipment within the food industry.
It is important that your operational staff reads these directions for use prior to the
installation and start of operation. Operation as laid down in these directions for use will
ensure an optimum level of hygiene in your factory and a minimum level of
maintenance and repair work.
1.0 Application
The S Booster is made of corrosion resistant materials, mainly stainless steel, and is
therefore, especially suitable for application within the food industry. If you need
information on further applications, please contact Ecolab.
1.1 Warnings
The special warnings CAUTION, ATTENTION and NOTE used in this Technical
Manual have the following meanings:
CAUTION: This term is used to highlight the fact that complete or even partial
failure to properly adhere to operating instructions, working
instructions, specified working sequences and similar can cause
personal injuries or accidents.
ATTENTION: This term is used to highlight the fact that complete or even partial
failure to properly adhere to operating instructions, working
instructions, specified working sequences and similar can cause
damage to the equipment.
NOTE: This term is used to draw attention to a particular feature.

1.2 Safety Instructions
A) Repairs are only to be carried out when the unit is switched off.
Warning!
WARNING
The unit is only to be used for purposes as described in this user
guide.
WARNING
Dry running for even a very short period of time can cause dry
running not detected by our dry running security. In any case a stable
and sufficient water supply is ALWAYS required.

2. Standard Unit
The Booster consists of two pumps mounted on a floor frame, non-return valves,
manifold (inlet) with flow switch, manifold (outlet) and Booster controller unit.
119000068
1. Inlet 6. Manifold
2. Manifold 7. Outlet
3. CRIE Pump 8. Ball valve
4. SF Pump 9. Non return valve
5. Pressure transmitter 10. Temperature sensor
11. MPC-E controller