Parker RE06M T Series User manual

Bulletin MSG11-5715-651/UK
RE06M*T Design ³25
RE*M*T Design ³45
RE*R*T Design ³45
RE*E*T Design ³20
R4V Design ³A
R5V Design ³A
R6V Design ³B
Operation Manual
Proportional Pressure
Valves with integrated
Electronics
Parker Hannifin
Manufacturing Germany GmbH & Co. KG
Industrial Systems Division Europe
Gutenbergstr. 38
41564 Kaarst, Germany
Tel.: [phone]
E-mail: [e-mail]
Copyright © 2019, Parker Hannifin Corp.

2
Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users having
technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection
of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects
of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalog and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
system options based upon data or specifications provided by the user, the user is responsible for
determining that such data and specifications are suitable and sufficient for all applications and
reasonably foreseeable uses of the components or systems.
WARNING — USER RESPONSIBILITY

Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
3Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Content Page
1. Introduction 4
Ordering Code RE06M*T 4
Ordering Code RE*T 4
Ordering Code RE*E*T 5
Ordering Code R*V 6
Ordering Code R5V 7
Characteristics of Valve Driver 8
Block Diagram of Integral Electronics 8
Technical Data 9
Name Plate Example 9
Signal Flow Diagram 10
2. Safety Instructions 11
Symbols 11
Marking, Name Plates 11
Work at the Valve 11
3. Important Details 11
Intended Usage 11
Common Instructions 11
Liability 11
Storage 11
4. Mounting / Installation 12
Scope of Supply 12
Mounting 12
Bolt kits 12
Operation Limits 12
Pressure Fluids 13
Air Bleeding of Hydraulic System 13
Filter 13
Flushing 13
Electrical Connection 14
Electrical Interfacing 15
5. Operation Instructions 17
ProPxD parameterizing software 17
Hardware requirements 17
Cable Specification 17
Parametrizing cable 17
Program Installation 17
Software Operating 18
Parameter overview for basic mode 19
Individual Description of Basis-Parameters 19
Parameter overview for expert mode 19
Individual Description of Expert Parameters 19
Error messages 20
6. Trouble Shooting 21
7. Accessories / Spare Parts 22
Accessories 22
Spare Parts 22

4
Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Ordering Code RE06M*T
1. Introduction
Proportional
pressure
relief valve
Normaly
open
Seal Design
series
(not required
on ordering)
Onboard
electronics
NG06 Electronic
attachment
Command
signal
Code Pressure stage
05 50 bar
10 105 bar
17 175 bar
21 210 bar
25 250 bar
35 350 bar
Code Command signal
F
Voltage input 0...+10 V
with reference output
+10 V
GCurrent input
0...20 mA
RCurrent input
4...20 mA
RE 06 M T 2 1 0
Interface
ISO 6264
Pressure
stage
Code Interface
M
Subplate
mounting
ISO 6264
R 1)
1) external drain with pipe only
Ordering Code RE*T
Proportional
pressure
relief valve
Normaly
open
Seal
Design
series
(not required
on ordering)
Onboard
electronics
Nominal
size
Electronic
attachment
Command
signal
Code Pressure stage
10 105 bar
17 175 bar
25 250 bar
35 350 bar
Code Command signal
F
Voltage input 0...+10 V
with reference output
+10 V
RCurrent input
4...20 mA
RE T 1 0
Inter-
face
Pressure
stage
Code Seal
N NBR
V FPM
Code Nominal size
10 NG10
25 NG25
32 NG32
Pilot oil Options
Poppet
spring
S
Code Options
omit Without mech. max.
adjustment
MMechanical max.
adjustment
Pilot oil
Code Pilot Drain
1 internal external
4 internal internal
Option:
Body only
P/T-connec-
tion, sole-
noid 180°
twisted
XG087
Code Seal
N NBR
V FPM

Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
5Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Code Nominal size
16 NG16
25 NG25
32 NG32
40 1) NG40
50 1) NG50
63 1) NG63
Code Spool type
omit Standard
S07 2) with poppet seals
1) With poppet seal.
2) Not for NG16
Proportional
pressure
relief valve
Normaly
open
Seal
Design series
(not required on
ordering)
Onboard
electronics
Nominal
size
Electronic
attachment
Command
signal
RE E T 1 1 0
Slip-in
mounting
Pressure
stage
Pilot oil Options
Poppet
spring
S
Spool
type
Code Pressure stage
10 105 bar
17 175 bar
25 250 bar
35 350 bar
Code Seal
N NBR
V FPM
Code Command signal
F
Voltage input 0...+10 V
with reference output
+10 V
RCurrent input
4...20 mA
Code Options
ohne Without mech. max.
adjustment
MMechanical max.
adjustment
Ordering Code RE*E*T

6
Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Code Interface
4
Subplate
mounting
ISO 6264
6
Ordering Code R*V
Pressure
valve
Proportional
pilot
Seal
Design Design
series
(not required
on ordering)
Relief
function
Nominal
size
Modifi-
cations
Command
signal
Code Pressure stage 1)
1 105 bar
3 210 bar
5 350 bar
Code Command signal
10V
0...+10 V (reference
output +10 V)
4MA 4...20 mA
R V P
Interface
Pressure
stage
Code Seal
1 NBR
5 FPM
Code Nominal size
03 NG10
06 NG25
10 NG32
Drain port Options
Max. pressure
350bar
5
Code Options
PN Without mech. max.
adjustment
PM 4) Mechanical max.
adjustment
Pilot oil
Code Drain
0 internal
12) external from
subplate
23) external from valve
body (Y-port)
Pilot oil
Code Design series
A R4V
B R6V
Pilot oil drain
Code Valve Drain
3 R4V Y-port at subplate
9 R6V Y-port = G 1/8"
1) Other pressure stages on request
2) Only R4V
3) Only R6V
4) R4V: Adjustment with acorn nut

Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
7Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Proportional
pressure relief
valve Proportional
control
Seal
Design
series
Nominal
size
Options
Command
signal
Code Pressure stage
1 105 bar
3 210 bar
5 3) 350 bar
Code Command signal
10V
0...+10 V (reference
output +10 V)
4MA 4...20 mA
R5V P A
Pressure
stage
Code Seal
1 NBR
5 FPM
Body Options
SAE
interface
Code Options
PN w/o mechanical max.
adjustment
PM with mechanical max.
adjustment
2
Pilot oil
Code Nominal size
06 SAE ¾"
08 SAE 1"
10 SAE 1¼"
12 1) SAE 1½"
SAE 61
Code Size
Max. pressure
[bar]
3 12 210
4 10 280
5 06/08 350
SAE 62
Code Size
Max. pressure
[bar]
6 1) 06/08/10/12 350
2-port body
Code Pilot ports
7 Y1 = G1/4 " 2)
3-port body
Code Pilot ports
3M = 7/16 - 20 UNF
9M = G¼
Ordering Code R5V
Code Option
152 4) 3-port body with
metric threads
1) Only R5V 3port
2) Y1 only available at external drain (pilot oil code 6).
3) R5V10-4*5 up to 280 bar.
4) R5V08 SAE62: Tank port SAE61 (M10)

8
Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Parker R*V / RE*T pressure valves have an integral
electronic and requires only one sole electrical
common for the control system.Different flow sizes,
as well as command signal options are available
to achieve an optimal adaption for different appli-
cations.
Block diagram of integral elektronics
Code F/10V
Code G/R/4MA
Characteristics of Valve Driver
The described integral electronic driver combines
all necessary functions for the optimal operation of
the valve. The most important features are:
• digital circuit design
• high dynamic constant current solenoid con-
trol
• differential input stage with various command
signal options
• two quadrant ramp function
• MIN adjustment for deadband compensation
• MAX adjustment to match the command signal
span to the valve operating range
• optional reference outputs 10 V for potentio-
meter supply
• standard central connection
• compatible to the relevant European EMC-
standards
• comfortable interface program
RE06M*T Parametrizing connector
Central connector
Air bleeding

Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
9Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Name plate example
Technical data
General
Design Pressure valve
Operation Proportional solenoid
Mounting pattern see ordering code
Installation position any
Hysteresis [%] ± 1.5 of pmax
Ambient temperature range [°C] -20...+60
MTTFDvalue 1) [years] RE06M*T: 150
RE*E*T, RE*M*T, RE*R*T, R4V, R5V, R6V: 50
Protection class IP65 acc. to EN 60529
Vibration strength [g] 10 sinus 5...2000 Hz acc. to IEC 68-2-6
10 (RMS) noise 20...2000 Hz acc. to IEC 68-2-36
15 shock acc. to IEC 68-2-27
Hydraulic
Fluid Hydraulic oil according to DIN 51524
Viscosity, permitted
recommended
[cSt] /
[cSt] /
[mm²/s]
[mm²/s]
20...400
30...80
Fluid temperature [°C] -20...+70 (NBR: -25...+70)
Filtration ISO 4406; 18/16/13
Operation pressure max. [bar] 350 ports P, A (X); 30 ports T, B (Y)
R5V: 350 ports A, B (for SAE61 size 10: 280,
size 12: 210); 30 port Y1
Electrical
Duty ratio ED % 100
Supply voltage Ub VDC 18...30, ripple < 5 % eff., surge free
Current consumption max. A 2.0
Pre-fusing A 2.5 medium lag
Potentiometer supply Up V +10 / ±5 % max. 10 mA
Command signal Ue V Code F/10V: 0...+10, ripple < 0.01 % eff., surge free, Ri = 100 kOhm
Ie mA Code R/4MA: 4...20, ripple < 0.01 % eff., surge free, Ri = < 250 Ohm
< 3.6 mA = enable off,
> 3.8 mA = enable on (acc. NAMUR NE43)
mA Code G: 0...20, ripple < 0.01 % eff., surge free, Ri = < 250 Ohm
Differential input voltage max. V 30 for terminal D and E against PE (terminal G)
V11 for terminal D and E against 0V (terminal B)
Adjustment ranges Min % 0...50
Max % 50...100
Ramp s 0...32.5
Interface RS 232C, parametrizing connection 5polig
EMC EN 61000-6-2, EN 61000-6-4
Central connection 6 + PE acc. EN 175201-804
Cable specification mm² 7 x 1.0 overall braid shield
Cable length max. m 50
1) If valves with onboard electronics are used in safety-related parts of control systems, in case the safety function is requested, the valve
electronics voltage supply is to be switched off by a suitable switching element with sufficient reliability.

10
Proportional Pressure Valves
Series RE*T / R*V
Operation Manual
Parker Hannifin Corporation
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Signal flow diagram