Protech Systems SP-6130 User manual

Ver. Q1
All Rights Reserved. Copyright 2014
Specification
SP-6130/6132/6135/6138
SP-6130/6132/6135/6138
Jumper Setting
6
5
2
1
RI 12V
5V
COM2 Configuration
Connector
6
5
2
1
6
5
2
1
(default)
6
5
2
1
3.3V 5V
LVDS Power Panel
Connector
6
5
2
1
(default)
RS232 RS422
RS485
12
910
12
910
12
910
COM2
RS232/422/485
Selection
(default)
Clear CMOS Data
Selection
Normal
1
Clear
CMOS
Data
(default)
1
COM2 Auto Detect
Selection
Normal
1
Auto
(default)
1
CFAST Card Power
Connector
3.3V
1
5V
(default)
1
System Power
Selection
Normal
1
(JP11)
Normal
1
(JP12)
6
5
2
1
RI 12V
5V
COM1 Configuration
Connector
6
5
2
1
6
5
2
1
(default)
1
7
JP1
DIMM1
JCFAST1
JP8
LVDS1
M_PCIE2
LAN1 LAN2 USB1
DVI1
COM1
JAUDIO1
J2
JP2
JP3
SP1 SATA1
HDD_POWER1
BAT1
JP7 JP4
JP5
JP6
JP11
JP10
CN_POWER1
JP12
COM2
JP9
J1
2 10
1 9
10
9
2
1
1
1
3
3
1 1
S1 S7 PC1 PC17
12
22
1
15
17
51
2
16
18
52
1
1
203
204
5
62
2
3029
12
1
19
2
20
8
7
2
1
15
26
15
26
5 1
1
10 6
10 9
2 1
1
3
3
1
2
SP-6130/
SP-6132/
SP-6135/
SP-6138
Quick
Reference
Guide
System
CPU Support Intel®D2550 processor on board
Chipset Intel®NM10
OS Support Windows 7
Memory Support 1 x DDR3 SO-DIMM Socket (up to 4GB)
Drive Bay 1 x 2.5” SATA HDD
Power Requirement DC in 9~36V
Front Bezel Aluminum
IP65 Front panel only
Wall Mount Type VESA 75
Net Weight & SP-6130: 3.11 kg ; 281.6 x 228.8 x 68.98 mm
Dimension (WxHxD) SP-6132: 3.55 kg ; 324 x 253 x 71 mm
SP-6135: 4.96 kg ; 395 x 294 x 74 mm
SP-6138: 2.69 kg ; 252 x 184.6 x 71 mm
Certificate FCC/CE
I/O Ports
Serial Port 2 x COM ports (5V/12V/RI selectable)
COM2 is RS-232/422/485 selectable.
USB 2 x USB 2.0
DVI 1 x DVI
LAN 2 x LAN (10/100/1000 Mbps)
Audio 1 x Line out, 1 x MIC-in
Expansion slot 1 x Mini-PCIe slot, 1 x CFast card slot
Display
LCD Panel Size & SP-6130: 10.4” SVGA or XGA
Resolution SP-6132: 12.1” XGA
SP-6135: 15” XGA
SP-6138: 8.4” SVGA
Touchscreen (ELO) 5W Bezel-free Analog resistive (USB interface)
Environment
Operating Temp. HDD: 0 ~ 45°C (32 ~ 113°F)
CFast Card: 0 ~ 55°C (32 ~ 131°F)
Storage Temp. -20 ~ 60°C (-4 ~ 140°F)
Humidity 20 ~ 90%

System View Wall Mount
SP-6130/6132/6135/6138
10.4”/12.1”/15”/8.4” Fanless Panel PC
All Rights Reserved. Copyright 2014
Safety Precaution
Cut-out Dimension:
(Unit: mm)
LAN1 LAN2 USB DVI COM1
COM2
SIM Card VCC GND
(Take SP-6130 for example.)
Front View Rear View
Top View
Rear View
I/O View
Quarter View
VCC GND
COM2
COM1LAN2 DVILAN1
Line outMic Powr switch
SIM CardUSB
SP-6130
Wall
263.5 ± 0.4
210.7 ± 0.4
SP-6132
Wall
305.8 ± 0.4
238.8 ± 0.4
SP-6135
Wall
374.8 ± 0.4
273.8 ± 0.4
SP-6138
Wall
234.2 ± 0.4
169.8 ± 0.4
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries per the manufacturer’s instructions.
WARNING! Some internal parts of the system may have high electrical voltage. Therefore we strongly
recommend qualified engineers open and disassemble the system. The LCD and touch screen are easily
breakable, please handle them with extra care.
The following messages are safety reminders on protecting your system from damages and
extending a long life of the system.
1. Check the Cable Voltage
● The range of operating voltage should be between DC 9V and 36V. Otherwise, the system
could be damaged.
2. Environmental Conditions
● Place the system on a sturdy & level surface. Be sure to allow enough space to have easy
access around the system.
● Avoid extremely hot or cold place to install the system.
● Avoid exposure to sunlight for a long period of time or in a airtight space. Also, avoid the
system from any heating device or using SP-6120/6122/6128 when it's been left outdoors
in a cold winter day.
● Note that the operating ambient temperature is 0~45°C for HDD & 0~55°C for CFast card.
● Avoid moving the system rapidly from a hot place to a cold one and vice versa because
condensation may come from inside of the system.
● Place the system in strong vibrations may cause hard disk failure.
● Do not place the system close to any radio active device in case of signal interference.
3. Handling
● Avoid putting heavy objects on top of the system.
● Do not turn the system upside down. This may cause the hard drive to mal-function.
● If water or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
● When the outside of the case is stained, remove the stain with neutral washing agent with
a dry cloth.
● Never use strong agents such as benzene or thinner to clean the system.
● If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol,
and then wipe thoroughly with a dry cloth.
● If dust has been accumulated on the outside, clean with a special vacuum cleaner made
for computers.