Protech Systems SP-7117 User manual

Ver. Q1
All Rights Reserved. Copyright 2013
Packing Checklist
SP-7117
SP-7117 SP-7117
Specifications System View
Front View Rear View
Top View
Rear View
I/O View
Side View Quarter View
410.7
375.03
5
M3
M4 (x8)
100 156.57
75
75
100
62
40.5
DC INDVI
LAN1
Line-out
MIC
LAN2COM1
Power switch
COM2COM3 USB
System
CPU Support Intel®D2550 (1.86 GHz, 1M cache)
Chipset Intel®NM10
OS support Windows 7
Memory Support 1 x DDR3 SO-DIMM Socket (up to 4GB, 1067 MHz)
Drive Bay 1 x 2.5” SATA HDD
Power Requirement DC-in 9~36V
Mounting Type VESA 75/100
IP65 For front panel only
System Weight 5.95 kg
Dimension (WxHxD) 410.7 x 374.6 x 62 mm (16.16” x 14.75” x 2.44”)
Certificate CE/FCC
I/O Ports
Serial Port 3 ports, RI/5V/12V selectable.
(COM1: RS-232 only; COM2/3: RS-232/422/485)
USB 4 x USB 2.0
LAN 2 x LAN (RJ-45 10/100/1000 Mbps)
DVI 1 x DVI-I
Audio 1 x Line-out; 1 x MIC
Expansion Slot 1 x CFast slot, 1 x Mini-PCIe slot
Display
LCD 17” TFT LCD (LED)
Resolution 1280 x 1024
Touchscreen 5-wire bezel-free resistive or projected-capacitive
Environment
Operating Temp. HDD: 0 ~ 45°C (32 ~ 113°F)
CFast card: 0 ~ 55°C (32 ~ 131°F)
Storage Temp. -20 ~ 60°C (-4 ~ 140°F)
Humidity Operating: 20 ~ 90% ; Stoarage: 20~95%
If you discover any item below damaged or lost,
please contact your vendor.
SP-7117 x 1
Driver/Manual CD x 1
This Quick Reference Guide x 1
Mini Jumper (2 mm) x 8
SP-7117
Quick
Reference
Guide

Jumper Setting
Jumper Setting
SP-7117
Fanless & Low Power 17” Intel®D2550 Panel PC
All Rights Reserved. Copyright 2013
Safety Precaution
SP1
Battery
1
2
9
10
COM3
COM4
JTP1
PWR_BTN1
PWR_LED1
RST_BTN1
SIO
10 5
1
6
JP8
AUDIO1
5
6
1
2
9 10
12
JP12
5
6
1
2
JP13
JP14 JP15
COM2 COM1
JUSB3 JUSB2 LAN2 LAN1
JDVI1 PWR_IN1
6 5
2 1
J1
JHDD_LED1
1 2
7 8
JP_VDD1
1 2
5 6
HDD_POWER1
SATA1
1
7
4
1
JP11
JP16
JP17
3
1
3
1
JP_PWM1
JP10
JLINE_OUT
SPK_L_OUT1
SPK_R_OUT1
1
3
JP9
JP7
JP1 JP2 JP3 JP4
1111
JP_BLEN1
CPUFAN1
DIMM1 JP_BRCTR1
Intel®
NM10 Intel®
N2800/
D2550
M_PCIE1
JTAG1
OSD_CTRL1
1 15 17 51
216 18 52
J2
JP5
9
102
1
1
12
1
2
18
LVDS1
30
29
12
JUSB6
JUSB7
15
1
3
1
2
71
72
73
74
203
204
1
3
1
1
2
2
3
1
3
1
1
1
1
5
31
1
1
10
5
6
9
15
1
19
210
JP6
5
6
1
2
1
2
5
6
RI 12V
5V
COM3 RI & Voltage
Selection
1
2
5
6
1
2
5
6
(default)
RI 12V
5V
COM2 RI & Voltage
Connector
12
56
12
56
12
56
(default)
1
2
5
6
RI 12V
COM1 RI & Voltage
Selection
1
2
5
6
5V
1
2
5
6
(default)
COM2 RS-485 DIR
Control Selection
Manual
1 1
Auto
RS-485
(default)
CFAST Voltage
Selection
3.3V
11
5V
(default)
Clear CMOS Data
Selection
Normal
1 1
Clear
CMOS
Data
(default)
Power Mode
Selection
AT
1
ATX
(default)
1
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries per the manufacturer’s instructions.
WARNING! Some internal parts of the system may have high electrical voltage. Therefore we strongly
recommend qualified engineers open and disassemble the system. The LCD and touch screen are easily
breakable, please handle them with extra care.
The following messages are safety reminders on protecting your system from damages and
extending a long life of the system.
1. Check the Cable Voltage
● The range of operating voltage should be between DC 9 ~ 36V. Otherwise, the system
could be damaged.
2. Environmental Conditions
● Place your SP-7117 on a sturdy & level surface. Be sure to allow enough space to have
easy access around the system.
● Avoid extremely hot or cold place to install the system.
● Avoid exposure to sunlight for a long period of time or in a airtight space. Also, avoid the
system from any heating device or using SP-7117 when it's been left outdoors
in a cold winter day.
● Note that the operating ambient temperature is 0~50°C for HDD & -5~60°C for CFast card.
● Avoid moving the system rapidly from a hot place to a cold one and vice versa because
condensation may come from inside of the system.
● Place SP-6305 in strong vibrations may cause hard disk failure.
● Do not place the system close to any radio active device in case of signal intereference.
3. Handling
● Avoid putting heavy objects on top of the system.
● Do not turn the system upside down. This may cause mal-function of the hard drive.
● If wate or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
● When the outside of the case is stained, remove the stain with neutral washing agent with
a dry cloth.
● Never use strong agents such as benzene or thinner to clean the system.
● If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol,
and then wipe thoroughly with a dry cloth.
● If dust has been accumulated on the outside, clean with a special vacuum cleaner made
for computers.
COM2 RS-232/422/485
Selection
RS-422RS-232
11
2 2
1
2
9
10 9 10
9
10
RS-485
(default)
1
COM3 RS-485 DIR
Control Selection
Manual
1
Auto
RS-485
(default)
COM3 RS-232/422/485
Selection
RS-422RS-232
1 2
9 10
1 2
9 10
1 2
9 10
RS-485
(default)