Protech Systems SP-6140 User manual

Ver. Q1
All Rights Reserved. Copyright 2016
Specification
SP-6140/6145
SP-6140/6145
Jumper Setting
SP-6140/
SP-6145
Quick
Reference
Guide
Clear CMOS Data
Selection
1
Clear
CMOS
Normal
(default)
1
CFAST Card Power
Selection
3.3V
1
5V
(default)
1
2
1
VCC5 VCC12
RI
(default)
COM Port RI &
Voltage Selection
6
5
2
1
6
5
2
1
6
5
VGA DDC DVI-I DDC
DDC Selection
21
65
21
6
5
(default)
(JP38)
1
7
DIMM1
CFAST1
SLOT1
DVI2
USB4
SATA1
BAT1
JP11
USB5
10 9
2 1
S1 S7 PC1 PC17
1 2
12
1
15
17
51
2
16
18
52
1
203
204 2
1
3
COM3COM4COM5COM6
JP1
1
2
SATA_PWR1
SLOT2
1
15
17
51
2
16
18
52
JP35
JP34
3
3
1
1
CN_POWER1
12 SW2
JP36
1
2
JPCOM1
6
2 1
5
SW1
JP_COM1
COM1
LAN1 LAN2 USB2
JDIO1
JAUDIO1
JP10 JLPC1
JP9
JPOE1
JP13
JP3
JP_COM2
COM2
2
1
JPCOM2
1
3
JP_BLEN1
1
2
JP38
6
2 1
5
JP4
LVDS1
1
3
JP6
30
6
2 1
5
JP5
29
1
2
JP39
INV1
1
2
19
20
Please set JP13 to VGA DDC if VGA & DVI-D are connected for dual display.
LVDS
Enable
(default)
11
LVDS and DVI-D Enable
Selection
(JP35)
(JP34)
DVI-D
Enable
1
1
1
1
System
CPU Support Intel®E3845/E3826/J1900 processor on board
OS Support Windows 7 / Windows 8.1 / WES7 / WES 8.1 Industry Pro
Memory Support 1 x DDR3L SO-DIMM Socket (up to 8GB)
Drive Bay 1 x 2.5” SATA HDD
Power Requirement DC-in 9V~36V
Front Bezel Aluminum
IP65 Front panel only
Wall Mount Type VESA 75 / VESA 100
Net Weight & SP-6140: 3.5 kg ; 277.6 x 228.8 x 82 mm
Dimension (WxHxD) SP-6145: 5.4 kg ; 408 x 308 x 87.7 mm
Certificate FCC/CE
I/O Ports
Serial Port 4 x COM ports (COM1/2 is 5V/12V/RI selectable)
COM1/2 is RS-232/422/485 selectable. COM3/4: RS-232.
USB 2 x USB 2.0 + 1 x USB 3.0
Display 1 x DVI-I
LAN 2 x LAN (10/100/1000 Mbps) with optional PoE
Optional 2 PoE ports support IEEE 802.3af (max. 15.4W)
Audio 1 x Line out, 1 x MIC-in
Expansion Slot 1 x CFast card slot
1 x full-sized mini PCIe slot (PCIe+USB+external SIM slot)
1 x half-sized mini PCIe slot (PCIe+USB)
SD Card Slot 1 x external SD card slot (with cover)
SIM Card Slot 1 x external SIM card slot (with cover)
Display
LCD Panel Size & 10.4” (SP-6140) / 15” (SP-6145) XGA (Resolution: 1024 x 768)
Touchscreen (ELO) 5W Analog resistive (USB interface)
Environment
Operating Temp. HDD: 0°C~ 40°C (32°F ~ 104°F)
Wide temp. storage and periphrals: -20°C~ 55°C (-4°F ~ 131°F)
(without Audio & PoE, E3845/E3826 only)
Wide temp. storage and periphrals: -20°C~ 50°C (-4°F ~ 122°F)
(with PoE, without Audio, E3845/E3826 only)
Storage Temp. -30°C~ 60°C (-22°F~ 140°F)
Humidity 20%~ 90%

SP-6140/6145
All Rights Reserved. Copyright 2016
Safety Precaution
System View
10.4” and 15” Fanless Panel PC
Safety PrecautionSafety Precaution
Cut-out Dimension (Unit: mm)
Front View (SP-6140)
I/O View
SP-6145
SP-6140
277.6
228.8
100
75
45.8
12.5
100
75
251.6 SP-6140 SP-6145
82
10
12.3141
31
13
202.8
87.7
10
12.3
141
37
20 268
Rear View (SP-6140)
Side ViewTop View (SP-6140)
Top View (SP-6145)
251.6
371
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries per the manufacturer’s instructions.
WARNING! Some internal parts of the system may have high electrical voltage. Therefore we strongly
recommend qualified engineers open and disassemble the system. The LCD and touch screen are easily
breakable, please handle them with extra care.
The following messages are safety reminders on protecting your system from damages and
extending a long life of the system.
1. Check the Cable Voltage
● The range of operating voltage should be between DC 9V and 36V. Otherwise, the system
could be damaged.
2. Environmental Conditions
● Place your SP-6140/6145 on a sturdy & level surface. Be sure to allow enough space
to have easy access around the system.
● Avoid extremely hot or cold place to install the system.
● Avoid exposure to sunlight for a long period of time or in a airtight space. Also, avoid the
system from any heating device or using SP-6140 when it's been left outdoors
in a cold winter day.
● Note that the operating ambient temperature is 0~45°C for HDD & 0~55°C for CFast card.
● Avoid moving the system rapidly from a hot place to a cold one and vice versa because
condensation may come from inside of the system.
● Place SP-6140/6145 in strong vibrations may cause hard disk failure.
● Do not place the system close to any radio active device in case of signal intereference.
3. Handling
● Avoid putting heavy objects on top of the system.
● Do not turn the system upside down. This may cause the floppy drive and hard drive to
mal-function.
● If wate or other liquid spills into this product, unplug the power cord immediately.
4. Good Care
● When the outside of the case is stained, remove the stain with neutral washing agent with
a dry cloth.
● Never use strong agents such as benzene or thinner to clean the system.
● If heavy stains are present, moisten a cloth with diluted neutral washing agent or alcohol,
and then wipe thoroughly with a dry cloth.
● If dust has been accumulated on the outside, clean with a special vacuum cleaner made
for computers.
GND VCC
Power
RESET
USB 2.0
USB 3.0 DVI-I LAN1 LAN2
USB 2.0
COM3
COM4
PoE
LED2
PoE
LED1
MIC
Line-Out
COM2COM1
Wall Mount
Wall
253.6
213.2
204.8
Wall
8 - Ø4.70 HOLE
262
12 - Ø4.70 HOLE
386
373
130
285.5
270
98