Protech Systems SP-7755 User manual

Ver. Q1
All Rights Reserved. Copyright 2017
Packing Checklist
SP-7755
SP-7755
SP-7755
Specifications
System View
Driver/ Manual DVD x1
M12 Power Supply Cable x1
Front View Rear View
Top View Left Side View
365
279.46
305.05
Buttom View
Right Side View
99.16
(Unit:mm)
Rear I/O
HDD Tray
Power Button
DC-IN COM LAN2 LAN1 USB 3.0
If you discover any item below damaged or lost,
please contact your vendor.
SP-7755 x1
This Quick Reference Guide x1
SP-7755
Quick
Reference
Guide
System
CPU Support Intel®Celeron®N3350 processor : 6w, 2M Cache, 2.4Ghz
Chipset
Memory Support
Front Bezel
Drive Bay
IP Rating
Power Input
Operating System
Watchdog
Weight / Dimension
Mounting Support
Certificate
Intel® AtomTM x7 E3950 processor : 6.5w, 2M Cache, 1.8Ghz
Intel® SOC
1 x SO-DIMM socket supporting 1600/1867 DDR3L memory
up to 8G (non-ECC)
Aluminum
1 x SATAIII Port (6.0 Gb/sec)
IP66
DC in 12V / 24V
Windows 10 loT Enterprise LTSB 2016 64bit / Ubuntu 16.04 LTS
1~255 second Watchdog timer selectable
7.2 kg / 365mm(W) x 279.46mm(H) x 99.16mm(D)
Wall mount / VESA 100 / Stand
FCC/CE
I/O Ports (Rear side)
Power Input 1 x M12 waterproof connector, supporting 12V / 24V DC
Power Switch 1 x Power Button
USB 2 x USB 3.0 with M12 waterproof connector
Serial Port 1 x COM port with M12 waterproof connector
COM1 for RS-232
LAN 2 x GbE LANs with M12 waterproof connector
LAN 1: Intel®I210IT / LAN 2 : Intel®I210IT
Drive Bay 1 x 2.5 inch SATAIII HDD or SSD drive space
Expansion Slot 1 x full-sized mini-PCIe slot (with mini-PCIe and USB signal)
Display
LCD Panel 15” XGA (resolution 1024 x 768) LCD panel
Touch Screen 15” Projective capacitive touch (USB interface)
15” 5-wire Resistive touch (USB interface)
Environment
Operating Temp. HDD: 0°C ~ 45°C (32°F ~ 113°F)
SSD: 0°C ~ 55°C (32°F ~ 131°F)
Wide Range Temp. : -20°C ~ 55°C (-4°F ~ 131°F) (w/ E3950)
Storage Temp. -20°C ~ 80°C (-4°F ~ 176°F)
Humidity 20% ~ 90%

Jumper Setting
SP-7755
All Rights Reserved. Copyright 2017
Safety Precaution
15” Intel®AtomTM x7-E3950 / Celeron®N3350 Processor Fanless and all-around IP66 Panel PC
The following messages are safety reminders on how to protect your system
from damages, and thus help you extend the life cycle of the system.
1. Check the Line Voltage
The operating voltage for the power supply should cover the range of
12V / 24V DC; otherwise, the system may be damaged.
2. Environmental Conditions
Place your SP-7755 on a sturdy, level surface. Be sure to allow
enough room on each side to have easy access.
Avoid moving the system rapidly from a hot place to a cold place or
vice versa because condensation may come from inside of the system.
Place SP-7755 against strong vibrations, which may cause hard disk
failure.
3. Handling
Do not turn the system upside down. This may cause the hard drive
to mal-function.
Do not allow foreign objects to fall into this product.
If water or other liquid spills into this product, unplug the power cord
immediately.
4. Good Care
When the outside of the case is stained, remove the stain with neutral
washing agent with a dry cloth.
If dust has been accumulated on the outside, remove it by using a
special made vacuum cleaner for computer.
CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
accordingto the manufacturer’s instructions.
WARNING!
Some internal parts of the system may have high electrical voltage. Therefore we
strongly recommend qualified engineers open and disassemble the system.
1
LVDS Backlight
Control Selection
3.3V
(default)
1
5V
1
(default)
Normal
Clear CMOS Data
Clear CMOS
COM2
M_PCIE1
Mini PCI-E
COM1
JFP1
PWR2
AUDIO1
SATA_PWR1
LAN2 LAN1 USB2 USB1
JI2C1
SO_DIMM1
SW1 JP3
USB3
JP9
LVDS1
JP4
JP7
JBAT1
FAN1 JINV1 SATA1
JP_VDD1
JLPC1
JMCU1
JDIO1
LVDS VCC Voltage
3.3V
(default)
1
5V
1
CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with
the same or equivalent type recommended by the manufacturer. Dispose the used batteries according to the
manufacturer’s instructions.
Front Panel Setting
HDD LED
Power Button
3
1
2
1
2
1
2
1
2
9
10
9
10
9
10
9
10
57
8
Power LED
Reset Button
6
(1-3)
(2-6)
(5-7)
(8-10)
1