Regency LEGACY STORAGE CABINET LSC2935 User manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
LEGACY STORAGE CABINET • LSC2935 • INSTRUCTIONS
Organize your parts and hardware. You will need a Phillips head and at head screw driver and rubber mallet.
Hardware :
A: Mounting Bracket(4) • B: Hinge(4) • C: Lock Lip • D: Door Tooth(2) E: Small Screw(4) F: Cam Locks(8)
G: Cam Pins(8) • H: Medium Screws(32) • I: Shelf Pins(4) • J: Adjustable Glides(4) K: Large Screws(4) •
L: Door Handles(2) • M: Keys(2)
ABCDEFGH
Parts :
N: Back • O: Front Lip • P: Bottom • Q: Sides(2) R: Shelf • S: Top • T: Door(2)
SRQ
P
O
NT
STEP 1 : Insert 4 cam pins(G) into top(S).
IJKL M
STEP 2 :Attach brackets(A) to sides(Q) using
pre drilled holes with 2 medium screws(H)
each bracket(4). Also insert 2 cam pins(G) and
2 cam locks(F) in sides(Q).
S
G
G
G
GQ
A A
G
GF
F

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
STEP 3 : Place 4 cam locks(F) into bottom(P)
and attach front lip(O) to bottom by inserting
dowel rods on front lip(O) into bottom(P).
STEP 4A : Place side(Q) down, pins up and
connect bottom(P) as shown below by
inserting cam pins into locks and tighteing.
STEP 4A : Place Back(N) into place by
inserting Dowel rods into holes on Side(Q).
LEGACY STORAGE CABINET • LSC2935 • INSTRUCTIONS
P
F F
FF
P
O
PO
QQ
PN
STEP 5 : Place second side(Q) in place by
inserting cam pins into locks and tightening.
Q
PN
STEP 6 : Screw adjustable glides(J) into place
with 4 medium screws(H) each glide(4).
P
J J
J J
STEP 7 : Place shelf pins(I) in place and
insert shelf(R).
R
IIII
STEP 8 : Place top(S) onto shell by inserting
cam pins into locks and tightening.
4A 4B

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
LEGACY STORAGE CABINET • LSC2935 • INSTRUCTIONS
STEP 9 : Place door handles(L) onto doors(T)
with 2 long screws(K) each. Also use 2 small
screws(E) to attach 2 door teeth(D) to the
door that is with out the locking mechanism.
T
L
T
D
D
STEP 10 : Place Locking Lip(D) onto the
underside of the top(S) with 2 small screws(E).
E E
D
STEP 11 : Place Hinges(B) onto doors(T)
with 2 medium screws(H) each.
T T
B
B
B
B
B
STEP 10 : Connect Doors(T) to mounting
brackets(A) on the side walls(Q).
STEP 10A : Screw(10A) from bracket(A)
interlocks with hinge(B) opening just as
screw(10B) on hinge(B) interlocks with mount(A)
opening.
Note..The screw 10B is an adjustment for the door
position. Turn right to adjust door to center and
left to adjust toward the side.
10A 10B
A
B