Ricoh D5500 User manual

1
Quick Start Guide - Conguraon

2
1. Turn on the power switch by the line cord and then press the power buon on the front of the D5500
Main power Switch found by
power cord
So Power Switch found
2. Wait for Ready To use Message to be displayed
3. Using the back side of the pen, select the exit icon and then select Close.
1. Launching Administraon Mode

3
4. Drag the Keyboard out from the le of the screen
5. Click on the Admin Sengs icon
Admin Sengs Menu
Using the keyboard, enter the password.
Default password: admin (lower case)

4
Admin Sengs Menu
Click on the icon of the feature you want to change

5
2. System Sengs
Click the System Sengs Icon
Whiteboard Locaon Name How board is idened on network
Auto shutdown Time O (no) - 5 hours
Auto Standby Time O (no) - 60 minutes
Image Quality on Remote White-
board
Image quality seng when connecng wire-
lessly to PC or Across network
Use Temp. Save Funcon 0 - 30 Days
Use USB Memory On or o

6
3. Network Sengs
Click the Network Sengs Icon
Default seng is DHCP. If you require manual sengs, please contact your IT department.

7
4. Printer Sengs
Click the Printer Sengs Icon
Enter the IP Address of your Ricoh Printer / MFP
If you are using authencaon through your print driver, enter the conguraon informaon here.

8
5. Mail / SMTP Sengs
Click the SMTP Sengs Icon
Consult with your IT department for the required informaon above.

9
6. set Time & Date Sengs
Click the SMTP Sengs Icon
Select the proper me zone me and date.

10
7. Set Remote License
Click Add/delete Remote License Sengs Icon
Enter the remote sharing license that was purchased as an opon