Roger PR402DR User manual

QUICK START GUIDE
Connection and communication of PR402DR access controller
and RFT1000 ngerprint readers.
Typical installation of PR402DR access controller and RFT1000 ngerprint readers
* NOTE! If the system is operated by means of Ethernet port then RS485 bus is not used for communication with RFT1000 readers.
Technical support is available in weekdays:
• from 8:00 am to 4:00 pm at PSTN number [phone]
• from 4:00 pm to 8:00 pm at GSM number [phone]

ROGER sp.j
Gościszewo 59
82-400 Sztum
Polska
T. [phone]
F. [phone]
E. [e-mail]
I. www.roger.pl
This documents does not dene full conguration of devices. Description of advanced functions is given in dedicated manuals. Quick start guide - Connection and communication of PR402DR access controller and RFT1000 ngerprint readers, version 1.0EN Rev.A © 2013, Roger sp. j. reserves the right to modify the content and specication of presented products without notice.
Possible scenarios of operation
1. Communication by means of Ethernet port
2. Communication by means of RS485 port