rollease acmeda Easy Spring Air Setup guide

Easy Spring Air
ASSEMBLY + INSTALLATION MANUAL
v1.1 | July 2023

CONTENTS
SECTION B | SYSTEM DETAILS 3
OVERVIEW.......... ......................................................................................................................................................... 3
SYSTEM OPTIONS ............................................................................................................................................4
BOM & CUTTING LIST ............................................................................................................................................ 5
SECTION C | PREPARATION 5
FABRIC PREPARATION ............................................................................................................................. 5
SECTION D | ASSEMBLY 6
IDLER ASSEMBLY ............................................................................................................................................6
CONTROL ASSEMBLY ............................................................................................................................................6
SECTION E | PRE-TENSION 6
PRE-TENSIONING ............................................................................................................................................ 6
SPRING CAPACITY CHART | 420GSM .............................................................................................................. 7
SPRING CAPACITY CHART | 350GSM ................................................................................................ 8
SPRING CAPACITY CHART | 220GSM ..............................................................................................................9
SPRING CAPACITY CHART | 155GSM ............................................................................................................ 10
SECTION F | PREPARE & PACK ASSEMBLIES FOR INSTALLATION 11
OPEN SYSTEM... .........................................................................................................................................................11
CASSETTE SYSTEM ............................................................................................................................................11
SECTION A | INSTALLATION 12
SHADE INSTALLATION ...........................................................................................................................................12
PRE-TENSION CHECKS ............................................................................................................................12
ADD OR REMOVE PRE-TURNS .............................................................................................................13
SET LIMITS .......... ........................................................................................................................................................13
SECTION B | TROUBLESHOOTING 14
DISCLAIMER
INTRODUCTION
This Assembly and Installation manual for Easy Spring Air System has been produced by Rollease Acmeda to supply the necessary information for the safe and
correct assembly of Easy Spring Air System.
DISCLAIMER
Rollease Acmeda has used reasonable care in preparing the information included in this document, but makes no representations or warranties as to the
completeness or accuracy of the information. Information is supplied upon the condition that the persons receiving the information will make their own
determination as to its suitability for their purposes prior to use. Rollease Acmeda assumes no liability whatsoever for any damages incurred by you resulting
from errors in or omissions from the information included herein. Rollease Acmeda reserves the right to make changes without further notice to any products to
improve reliability, function or design.
COPYRIGHT
COPYRIGHT © ROLLEASE ACMEDA
All rights are reserved. No part of this document may be reproduced or utilised in any means, by any means, electronic or mechanical including photocopying,
recordings, or by any information storage or retrieval system, without the express permission from Rollease Acmeda.

Page. 3
5mm Allen Key
1Tension Lock 2Spanner Tool
3
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SECTION B | SYSTEM DETAILS
GENERAL SCHEMATIC
OVERVIEW
1A
1G
3
5
6
1B
1C
1D
2A
2B
4A
4A
4B
4B
1. CONTROL:
• A - Easy Spring Air Micro
• B - Easy Spring Air Mini
• C - Easy Spring Air Small
• D - Easy Spring Air Light
• E - Easy Spring Air Medium
• F - Easy Spring Air Heavy
• G - Tension Lock
2. LIMITER:
• A - Idler: 1.5” | Standard
• B - Limiter: Single Stop | Universal
3. ALUMINIUM TUBE:
• 1.5”
4. BRACKETS:
• A - Bracket: Skyline LX
• B - Bracket Cover: LX
5. WEIGHT BAR:
• Fabric wrap
6. FABRIC:
• See Texstyle
SYSTEM INDEX:
TOOLS REQUIRED
1E
1F

Page. 4
C
1/2"
1/2"
4-1/4"
3-15/16"
4-1/4"
9/16"
1-3/16"
7/8"
7/16"
9/16"
1-5/8"
9/16"
1"
7/8"
7/8"
15/16"
11/16"
1-1/2"
1/4"
1-9/16"
1/2"
1"
1/2"
RB91-1226-xxxLLL
Oval Aluminium Bottom Rail
RB91-1203-xxxLLL
Round Aluminium Bottom Rail
HBxx
Hem Bar External
RB91-1232-xxxLLL
D30 SILENT Medium Bottom Rail Flat Aluminium Bottom Rail
RB91-1205-xxxLLL
F4115 Flat Heavy Duty Bottom Rail
SB06-0201-xxxLLL
Internal Hem Bar
RCBIHB16
Fabric Wrap Bottom Up Weight Bar
RB91-1239-xxxLLL RB91-1236-xxxLLL
Fabric Wrap
1/2"
1/2"
4-1/4"
3-15/16"
4-1/4"
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
A4
01 A
SIZE:
REV.
SCALE:1:2
DIMENSIONS
IN "MM"
ROLLEASE
ACMEDA
18 Jun 2021
DRAWN:
www.rolleaseacmeda.com
XXX
WEIGHT BAR DATABASE ITEM DESCRIPTION:
PRODUCT SPECIFICATION SHEET
ITEM CODE:
FABRIC WRAP
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
1/2”
44mm
S45 STD
49mm
S45 HD
39mm
1/2"
51mm
2"
43mm
S45 LIGHT
33mm
1/4"
60mm
S60 STD
80mm
S60 | 80 HD
39mm
S40 STD
84mm
3.25"
65mm
2.5"
33mm
S35 STD
34mm
S35 HD
65mm
Aluminum Tube 63mm
80mm
Aluminum Tube STD 78mm
82mm
Aluminum Tube HD 78mm
78mm
Steel Tube 78mm
27mm
1"
29mm
11/8"
51mm
2"
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:1
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
06 Sep 2019 DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
-
TUBEDATABASE_MARKETING
REV.
02 A
44mm
S45 STD
49mm
S45 HD
39mm
1/2"
51mm
2"
43mm
S45 LIGHT
33mm
1/4"
60mm
S60 STD
80mm
S60 | 80 HD
39mm
S40 STD
84mm
3.25"
65mm
2.5"
33mm
S35 STD
34mm
S35 HD
65mm
Aluminum Tube 63mm
80mm
Aluminum Tube STD 78mm
82mm
Aluminum Tube HD 78mm
78mm
Steel Tube 78mm
27mm
1"
29mm
11/8"
51mm
2"
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:1
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
06 Sep 2019 DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
-
TUBEDATABASE_MARKETING
REV.
02 A
SECTION B | SYSTEM DETAILS
TUBE OPTIONS
SYSTEM OPTIONS
SYSTEM UPGRADE OPTIONS
CF90
ROUND/SQUARE
SQUARE
CASSETTE 110
P95 SEMI
CASSETTE
MOUNTING RAIL
WEIGHTBAR
CASSETTE
80/100/120
SQUARE
FASCIA
PURE
WHITE
pure white
069
COLOR RANGE
PURE
WHITE
pure white
069
069
pure white
069
BLACK
050

Page. 5
STD PIN END HD PIN END LIMITER
SL01-0306-xxx040 Skyline LX Bracket Piece 2
RB08-4151-xxx040 LX Bracket Covers Set 1
SB20-0504-xxxLLL Medium Square Cassette Headrail Piece 1
W - 5mm [1.38"]
(If using covers)
W - 5mm [1.38"]
(If using covers)
W - 5mm [1.38"]
(If using covers)
SL01-0306-xxx040 LX Skyline Bracket Piece 2
SB20-0503-xxx000 End Cap - Medium Square Cassette Set 1
RB12-3828-xxx038 Easy Spring Air - MICRO w Adjust - 1.5" LH
RB12-3831-xxx038 Easy Spring Air - MINI w Adjust - 1.5" LH
RB12-3829-xxx038 Easy Spring Air - SMALL w Adjust - 1.5" LH
RB12-3832-xxx038 Easy Spring Air - LIGHT w Adjust - 1.5" LH
RB12-3833-xxx038 Easy Spring Air - MED w Adjust - 1.5" LH
RB12-3834-xxx038 Easy Spring Air - HEAVY w Adjust - 1.5" LH
SLPEV653xx Skyline STD Pin End
RB12-6101-xxx038 Single Stop Limiter
RB91-1236-xxxLLL Fabric Wrap Bottom Rail mm [inch] 1W - 25mm [0.98"] W - 26mm [1.02"] W - 31mm [1.22"]
RB91-2136-xxx000 FW Bottom Rail End Caps Set 1
RB92-0903-001075 ACM Flat Spline - 9mm
SS91-5350-069000 Smooth Round Spline 5.0mm
VB05-0301-xxxLLL Base Rail Weight Rod mm [inch] 0 or 1 W - 65mm [2.56"] W - 66mm [2.6"] W - 71mm [2.8"]
RB12-3836-025000 Easy Spring Air - PreTension Tool (Hex) Piece 1
RB12-3835-503038 Easy Spring Air - Tension Lock Piece 1
RB12-3837-025000 Easy Spring Air - Spanner Tool Piece 1
RTEA-4T05-000580/RTEA4Txx Rollease Tube + M/P Tape | 1-1/2" mm [inch] 1W - 25mm [0.98"] W - 26mm [1.02"] W - 31mm [1.22"]
Fabric Width mm [inch] W - 25mm [0.98"] W - 26mm [1.02"] W - 32mm [1.26"]
Fabric Drop mm [inch]
BOOSTER Piece 1
DEDUCTION
OPEN BLIND
CASSETTE 110
PART NUMBER DESCRIPTION U.O.M QTY
INSTALL
SKYLINE LX BRACKET
OPEN*/CASSETTE 110^
W - 25mm [0.98"]
FABRIC See Texstyle 1
mm [inch] 1
TUBE
BOTTOM RAIL
TOOLS / ACCESSORIES
CONTROL OPTIONS
D + 150mm [5.9"]
*No Covers - If covers required add an extra 2mm [0.08"] to deduction, ie. (W-31mm [1.22"]) = [ W-(31mm [1.22"]+2mm [0.08"]) = W-33mm [1.30"]]
^No Covers - If covers are required add an extra 5mm [0.20"] to deduction
W - 26mm [1.02"]
Piece 1
LIMITER/IDLER
W - 31mm [1.22"]
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SECTION B | SYSTEM DETAILS
BOM & CUTTING LIST
SECTION C | PREPARATION
FABRIC PREPARATION
Secure spline for weightbar
2
Double Sided Tape
1Attach fabric onto tube if using double sided tape
Double Sided Tape
NOTE
Use staples
when using
one wrap on
the spline
NOTE
Minimum 2 full
wraps of fabric
on the tube

Page. 6 Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
PRE-TENSIONING
SECTION E | PRE-TENSION
Rotate spring control using allen key
1
DIRECTION OF PRE-TURNS CHECK
LH Back Roll
Clockwise
RH Front Roll
Clockwise
Attach Tension Lock
2
PRE-TURNS CHECK
Use the spring calculator or
spring capacity chart to nd
out the number of pre-turns
required.
SECTION D | ASSEMBLY
1Insert the booster into the
shade
2
Insert limiter/idler into tube
1
IDLER ASSEMBLY
CONTROL ASSEMBLY
CONFIGURATION CHECK
Left Hand
Control
NOTE
Illuminating the back of the
booster will make it easier to
locate the slider position.
Use spring calculator/charts to
nd out the size of your spring.
2 3 41LMini 5
NOTE
Booster must not be
pre-tensioned
Set the spring size by roatating the booster wheel to move the
slider. Align left edge of the slider to the appropriate spring size.

Page. 7
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SPRING CAPACITY CHART | 420GSM
SECTION E | PRE-TENSION
420gsm | 1.5” Tube
0.60 5 / 7 13 / 10 13 / 12 13 / 14 10 / 14 9 / 14 8 / 14 7 / 14 6 / 14 23 / 14 21 / 14 19 / 14 18 / 14 17 / 14 24
0.80 5 / 7 13 / 10 13 / 12 12 / 14 10 / 14 9 / 15 7 / 14 7 / 15 25 / 14 22 / 14 21 / 15 19 / 14 18 / 15 16 / 14 31
1.00 5 / 6 13 / 10 13 / 13 12 / 15 10 / 15 8 / 14 7 / 14 25 / 14 24 / 14 22 / 15 20 / 15 19 / 15 17 / 14 16 / 15 39
1.20 5 / 6 13 / 10 13 / 13 12 / 15 10 / 15 8 / 15 7 / 15 25 / 14 24 / 15 22 / 15 20 / 15 18 / 15 17 / 15 16 / 15 47
1.40 5 / 6 13 / 10 13 / 14 11 / 15 9 / 15 8 / 15 7 / 15 25 / 15 23 / 15 21 / 15 19 / 15 18 / 15 17 / 16 29 / 15 55
1.60 5 / 6 13 / 10 13 / 14 11 / 15 9 / 15 8 / 16 25 / 14 25 / 15 23 / 16 21 / 16 19 / 16 18 / 16 16 / 16 28 / 15 63
1.80 5 / 6 13 / 11 13 / 15 11 / 16 9 / 16 8 / 17 25 / 14 25 / 16 23 / 16 20 / 16 19 / 16 17 / 16 16 / 16 28 / 16 71
2.00 5 / 6 13 / 11 13 / 15 11 / 17 9 / 16 25 / 13 25 / 15 25 / 17 22 / 16 20 / 16 18 / 16 17 / 17 16 / 17 28 / 17 79
2.20 5 / 6 13 / 11 13 / 16 11 / 17 9 / 17 25 / 13 25 / 15 24 / 17 22 / 17 20 / 17 18 / 17 17 / 17 29 / 17 27 / 17 87
2.40 5 / 6 13 / 12 13 / 17 11 / 18 25 / 11 25 / 14 25 / 16 24 / 18 22 / 18 20 / 18 18 / 18 16 / 17 29 / 18 27 / 18 94
2.60 5 / 6 13 / 12 13 / 18 11 / 19 25 / 12 25 / 14 25 / 17 24 / 18 20 / 17 19 / 18 18 / 18 16 / 18 28 / 18 26 / 18 102
2.80 13 / 13 13 / 18 25 / 10 25 / 12 25 / 15 25 / 17 23 / 18 20 / 18 19 / 19 17 / 18 29 / 18 28 / 18 26 / 18 110
3.00 13 / 13 13 / 19 25 / 10 25 / 12 25 / 15 25 / 18 23 / 19 20 / 18 19 / 19 29 / 17 28 / 18 28 / 19 22 / 16 118
16 24 31 39 47 55 63 71 79 87 94 102 110 118 in
2.40 2.60
1.5" TUBE CAPACITY
MINI
EASY SPRING AIR BOOSTER CHART | 1.5"
CONTROL
WIDTH
m
0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.80 3.00
DROP
LIGHT
OUTSIDE SPECIFICATIONS
PARAMETERS
FABRIC DENSITY: 420gsm
FABRIC THICKNESS: 0.5mm
WEIGHT BAR: D30 Medium Bottom Rail & Ballast
BALLAST: 350grams/m (0.235 lbs/foot)
TUBE: 1.5"
MEDIUM
HEAVY
x / x : POSITION / PRE-TURNS

Page. 8 Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SPRING CAPACITY CHART | 350GSM
SECTION E | PRE-TENSION
350gsm | 1.5” Tube
0.60 4 / 16 11 / 15 8 / 15 7 / 16 12 / 15 10 / 15 9 / 16 8 / 16 7 / 15 6 / 15 24 / 15 22 / 15 21 / 16 19 / 15 24
0.80 4 / 16 11 / 15 8 / 15 6 / 15 12 / 16 10 / 16 9 / 16 8 / 16 7 / 16 25 / 15 24 / 16 22 / 16 20 / 15 19 / 16 31
1.00 4 / 17 11 / 16 8 / 16 6 / 15 11 / 15 10 / 16 9 / 17 7 / 15 7 / 16 25 / 15 23 / 16 21 / 15 20 / 16 19 / 16 39
1.20 4 / 17 11 / 16 8 / 16 6 / 16 11 / 16 10 / 17 8 / 15 7 / 15 7 / 17 25 / 16 23 / 16 21 / 16 20 / 16 18 / 16 47
1.40 4 / 18 11 / 17 8 / 17 6 / 16 11 / 16 9 / 16 8 / 16 25 / 13 25 / 15 25 / 17 23 / 17 21 / 16 19 / 16 18 / 16 55
1.60 4 / 18 10 / 16 8 / 17 13 / 16 11 / 17 9 / 16 8 / 16 25 / 14 25 / 15 24 / 16 22 / 16 21 / 17 19 / 17 18 / 17 63
1.80 4 / 19 10 / 17 8 / 18 13 / 17 11 / 17 9 / 17 25 / 12 25 / 14 25 / 16 24 / 17 22 / 17 20 / 17 19 / 17 18 / 18 71
2.00 4 / 20 10 / 17 7 / 16 13 / 17 11 / 18 9 / 17 25 / 13 25 / 15 25 / 17 24 / 18 22 / 18 20 / 17 19 / 18 17 / 17 79
2.20 10 / 18 13 / 14 13 / 18 11 / 19 9 / 18 25 / 13 25 / 15 25 / 17 23 / 17 21 / 17 20 / 18 18 / 17 17 / 18 87
2.40 10 / 18 13 / 14 13 / 19 10 / 17 25 / 11 25 / 13 25 / 16 25 / 18 23 / 18 21 / 18 20 / 19 18 / 18 17 / 18 94
2.60 10 / 19 13 / 15 13 / 19 10 / 18 25 / 12 25 / 14 25 / 16 25 / 18 23 / 19 20 / 18 19 / 18 18 / 19 17 / 19 102
2.80 10 / 20 13 / 15 12 / 18 25 / 10 25 / 12 25 / 14 25 / 17 25 / 19 23 / 19 20 / 18 19 / 19 18 / 19 29 / 17 110
3.00 10 / 21 13 / 16 12 / 19 25 / 10 25 / 12 25 / 15 25 / 17 25 / 20 20 / 17 20 / 19 19 / 20 29 / 17 28 / 17 118
16 24 31 39 47 55 63 71 79 87 94 102 110 118 in
1.20
CONTROL
SMALL
0.80 2.60 2.80 3.00
EASY SPRING AIR BOOSTER CHART | 1.5"
WIDTH
m
0.40 0.60 2.00 2.20 2.40 1.00 1.40 1.60 1.80
DROP
1.5" TUBE CAPACITY
LIGHT
MEDIUM
HEAVY
PARAMETERS
FABRIC DENSITY: 350gsm
FABRIC THICKNESS: 0.38mm
WEIGHT BAR: D30 Medium Bottom Rail & Ballast
BALLAST: 350grams/m (0.235 lbs/foot)
TUBE: 1.5"
x / x : POSITION / PRE-TURNS
OUTSIDE SPECIFICATIONS
MICRO

Page. 9
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SPRING CAPACITY CHART | 220GSM
SECTION E | PRE-TENSION
220gsm | 1.5” Tube
0.60 5 / 18 5 / 25 4 / 27 13 / 25 11 / 26 9 / 25 8 / 26 7 / 26 13 / 24 13 / 26 12 / 27 11 / 27 10 / 26 9 / 26 24
0.80 5 / 18 5 / 26 4 / 28 13 / 26 11 / 27 9 / 26 8 / 27 13 / 23 13 / 25 12 / 26 11 / 26 10 / 25 10 / 27 9 / 27 31
1.00 5 / 19 5 / 27 13 / 22 13 / 28 10 / 26 9 / 27 13 / 21 13 / 24 13 / 26 12 / 27 11 / 27 10 / 26 9 / 26 25 / 19 39
1.20 5 / 19 4 / 23 13 / 23 12 / 27 10 / 27 9 / 28 13 / 22 13 / 25 13 / 27 12 / 28 11 / 28 10 / 28 25 / 18 25 / 20 47
1.40 5 / 20 4 / 24 13 / 24 12 / 28 10 / 28 13 / 20 13 / 23 13 / 25 13 / 28 11 / 27 10 / 26 25 / 18 25 / 19 25 / 20 55
1.60 5 / 20 13 / 18 13 / 25 12 / 29 10 / 29 13 / 20 13 / 23 13 / 26 12 / 27 11 / 28 25 / 17 25 / 18 25 / 20 25 / 21 63
1.80 5 / 21 13 / 19 13 / 26 11 / 28 13 / 18 13 / 21 13 / 24 13 / 28 12 / 28 25 / 16 25 / 17 25 / 19 25 / 20 25 / 22 71
2.00 4 / 17 13 / 20 13 / 27 11 / 29 13 / 18 13 / 22 13 / 25 13 / 29 11 / 27 25 / 16 25 / 18 25 / 19 25 / 21 25 / 22 79
2.20 4 / 18 13 / 20 13 / 28 11 / 30 13 / 19 13 / 23 13 / 26 12 / 27 25 / 15 25 / 16 25 / 18 25 / 20 25 / 21 25 / 23 87
2.40 4 / 18 13 / 21 13 / 29 13 / 16 13 / 20 13 / 23 13 / 27 25 / 13 25 / 15 25 / 17 25 / 19 25 / 20 25 / 22 25 / 24 94
2.60 13 / 22 13 / 30 13 / 16 13 / 20 13 / 24 11 / 24 25 / 13 25 / 15 25 / 17 25 / 19 25 / 21 25 / 23 25 / 25 102
2.80 13 / 22 13 / 31 13 / 17 13 / 21 13 / 25 25 / 12 25 / 14 25 / 16 25 / 18 25 / 20 25 / 22 25 / 24 25 / 26 110
3.00 13 / 23 13 / 32 13 / 17 13 / 22 11 / 22 25 / 12 25 / 14 25 / 16 25 / 18 25 / 20 25 / 23 25 / 25 20 / 21 118
16 24 31 39 47 55 63 71 79 87 94 102 110 118 in
FABRIC DENSITY: 220gsm
FABRIC THICKNESS: 0.55mm
WEIGHT BAR: D30 Medium Bottom Rail & Ballast
BALLAST: 350grams/m (0.235 lbs/foot)
TUBE: 1.5"
x / x : POSITION / PRE-TURNS
2.60 2.80 3.00
LIGHT
0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40
CONTROL
DROP
EASY SPRING AIR BOOSTER CHART | 1.5"
WIDTH
m
0.40 0.60
HEAVY
1.5" TUBE CAPACITY
MEDIUM
SMALL
MICRO
PARAMETERS
OUTSIDE SPECIFICATIONS

Page. 10 Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SPRING CAPACITY CHART | 155GSM
SECTION E | PRE-TENSION
155gsm | 1.5” Tube
0.60 5 / 16 5 / 23 5 / 30 4 / 30 13 / 27 13 / 31 11 / 31 10 / 32 9 / 32 13 / 24 13 / 26 13 / 28 13 / 30 13 / 32 24
0.80 5 / 16 5 / 23 4 / 25 13 / 24 13 / 28 13 / 32 11 / 31 10 / 32 9 / 33 13 / 24 13 / 26 13 / 29 13 / 31 13 / 33 31
1.00 5 / 16 5 / 24 4 / 26 13 / 24 13 / 28 13 / 33 11 / 32 10 / 33 13 / 23 13 / 25 13 / 27 13 / 29 13 / 31 12 / 31 39
1.20 5 / 16 5 / 24 13 / 20 13 / 24 13 / 29 12 / 31 11 / 33 13 / 21 13 / 23 13 / 25 13 / 28 13 / 30 13 / 32 12 / 32 47
1.40 5 / 16 4 / 20 13 / 20 13 / 25 13 / 30 12 / 32 11 / 34 13 / 21 13 / 23 13 / 26 13 / 28 13 / 30 13 / 33 11 / 30 55
1.60 5 / 16 4 / 20 13 / 20 13 / 25 13 / 30 12 / 33 11 / 35 13 / 21 13 / 24 13 / 26 13 / 29 13 / 31 11 / 29 25 / 17 63
1.80 5 / 16 4 / 20 13 / 20 13 / 26 13 / 31 12 / 34 13 / 19 13 / 22 13 / 24 13 / 27 13 / 29 12 / 29 25 / 16 25 / 17 71
2.00 5 / 16 13 / 15 13 / 20 13 / 26 13 / 32 12 / 35 13 / 19 13 / 22 13 / 25 13 / 27 12 / 28 25 / 14 25 / 16 25 / 17 79
2.20 5 / 17 13 / 15 13 / 21 13 / 27 13 / 33 13 / 17 13 / 19 13 / 22 13 / 25 12 / 26 25 / 13 25 / 14 25 / 16 25 / 17 87
2.40 5 / 17 13 / 15 13 / 21 13 / 27 13 / 33 13 / 17 13 / 20 13 / 23 13 / 26 25 / 12 25 / 13 25 / 15 25 / 16 25 / 17 94
2.60 4 / 13 13 / 15 13 / 21 13 / 28 13 / 34 13 / 17 13 / 20 13 / 23 12 / 24 25 / 12 25 / 13 25 / 15 25 / 16 25 / 18 102
2.80 4 / 13 13 / 15 13 / 22 13 / 29 13 / 14 13 / 17 13 / 20 13 / 24 25 / 10 25 / 12 25 / 13 25 / 15 25 / 16 25 / 18 110
3.00 4 / 13 13 / 15 13 / 22 13 / 29 13 / 14 13 / 17 13 / 21 11 / 20 25 / 10 25 / 12 25 / 13 25 / 15 25 / 16 25 / 18 118
16 24 31 39 47 55 63 71 79 87 94 102 110 118 in
EASY SPRING AIR BOOSTER CHART | 1.5"
WIDTH
m
0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00
DROP
CONTROL
1.5" TUBE CAPACITY
LIGHT
MEDIUM
OUTSIDE SPECIFICATIONS
MICRO
SMALL
PARAMETERS
FABRIC DENSITY: 155gsm
FABRIC THICKNESS: 0.3mm
WEIGHT BAR: D30 Medium Bottom Rail & Ballast
BALLAST: 350grams/m (0.235 lbs/foot)
TUBE: 1.5"
x / x : POSITION / PRE-TURNS

Page. 11
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
OPEN SYSTEM
CASSETTE SYSTEM
SECTION F | PREPARE & PACK ASSEMBLIES FOR INSTALLATION
1.5” Brackets 1. Shade Assembly x 1
2. Bracket Covers Set x 1:
3. Mounting Bracket Set x 1
4. Screws x 4
5. Tension Lock
NOTE
The Tension Lock
must be removed
before the shade is
operated.
25
3
4
1
1
Cassette 110
1. Shade Assembly
2. Mounting Brackets (as required)
3. Appropriate Screws (as required)
2
3
Cassette 100
2
4
1. Shade Assembly
2. Mounting Brackets (as required)
3. Appropriate Fasteners (as required)
1
3
NOTE
The clip must be removed after installation.
NOTE
The clip must be removed before
the shade is operated.

Page. 12 Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
Attach Idler side
1
1Pull Bottom Rail down to
bottom location
Attach control side
2
Push the Bottom Rail up
to top position
2
Remove pre-tension clip
3
CHECK FUNCTIONALITY OF PRE-TENSIONED SHADE
SECTION A | INSTALLATION
SHADE INSTALLATION
PRE-TENSION CHECKS
3If Bottom Rail
raises at the
desired speed,
the correct
number of
preturns have
been assigned.
If shade slows or
falls from desired
position then not
enough pre-turns
have been applied.
4
Proceed to
setting limits
Add more pre-turns
or move slider
to lower number
changing the spring
size.
PULL FROM CENTER
PUSH FROM CENTER
Fast or automatic
raising of the
shade from desired
position indicates
excessive pre-turns.
5
Remove pre-turns or
move slider to higher
number changing the
spring size.

Page. 13
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
Remove pre turns using the spanner tool or by hand
2B
Add pre turns using the spanner tool or by hand
2A
DIRECTION OF PRE-TURNS CHECK
LH Back Roll
Clockwise
RH Front Roll
Clockwise
ADD PRE-TURNS
REMOVE PRE-TURNS
SECTION A | INSTALLATION
ADD OR REMOVE PRE-TURNS
DIRECTION OF PRE-TURNS CHECK
LH Back Roll
Clockwise
RH Front Roll
Clockwise
PRE-TURNS CHECK
Use the spring calcula-
tor/charts to nd out the
number of
pre-turns required.
PRE-TURNS CHECK
Use the spring calcula-
tor/charts to nd out the
number of
pre-turns required.
Raise or lower the top limit position by rotating the limiter head
1 2
Test limits by
moving the
shade up &
down
3Slide End Cap covers
over brackets
NOTE
Standard back roll shown,
reverse direction for front roll
SET LIMITS

Page. 14 Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SECTION B | TROUBLESHOOTING
NO.PROBLEM CAUSE SOLUTION
1.
Blind can’t raise up
Not enough tension or
incorrect spring size.
1. Check the pretension guide chart with blind size to ensure
pretension used is correct.
2. Add additional pretension until blind functions correctly:
Option 1 Option 2
Step 1: Remove the blind
and use PreTension Tool
(Hex) to adjust pretension
to the right number:
Step 2: Use the Tension Lock
to lock the pretension:
Step 3: Mount the shade onto
the brackets and remove the
lock:
Use the Spanner Tool to
adjust tension. Doesn’t
require blind to be removed,
however adjustment is slower.
2.
Blind will raise quickly
Too much tension or
incorrect spring size.
3. Ensure the recommend mass of weigh bar and ballast is
used.
4. Check the guide chart with blind size to ensure the position
of adjusting plug is correct. The position can be changed
by rotating the adjusting wheel. (Note the booster need be
disassembled from blind to operate)
2 3 41 5
LMini
2 3 41LMini 5
3.
Blind doesn’t stay on lower position:
The blind can’t stay on the bottom
position when released and always
retract back a short distance or retract
back to the top quickly.
There are too many
pretensions on the booster
than required so it is
overstressed or there is not
enough weight.
1. Check the recommend weight of weigh bar. If the used
weight is not enough, add more ballasts to achieve it. If it still
doesn’t work, then go to next step.
2. Check the pretension guide chart with blind size to ensure
pretension used is correct.
3. Remove pretension until blind functions correctly Use the
prong tension tool to reduce turns.
4. Check if the issue is solved. If not, use the tool to remove
another turn of pretension to try again. It may require a
couple of times to repeat above steps to nd the suitable
number of pretension as it varies with different fabric, tube,
and weight bar.
5. Check the guide chart with blind size to ensure the position
of adjusting plug is correct. The position can be changed
by rotating the adjusting wheel. (Note the booster need be
disassembled from blind to operate).
6. If correct, increase the position by one value and test
function.

Page. 15
Easy Spring Air Assembly and Installation Manual | v1.1 | July 2023
©Copyright All Rights Reserved Rollease Acmeda
SECTION B | TROUBLESHOOTING
NO.PROBLEM CAUSE SOLUTION
4.
Blind doesn’t stay on top position:
The blind can’t stay on the top position
when released and always drop down
for a certain distance or drop to lower
limit quickly.
There are no/less
pretensions on the booster
than required or too much
weight on the blind so the
booster cannot hold the
blind.
1. Check the recommend mass of weigh bar and ballast.
Remove ballast as required. If it still doesn’t work, then go to
next step.
2. Check the pretension guide chart with blind size to ensure
pretension used is correct.
3. Add additional pretension until blind functions correctly.
(Refer to above on how to add and lock pretension)
4. Check the guide chart with blind size to ensure the position
of adjusting plug is correct. The position can be changed
by rotating the adjusting wheel. (Note the booster need be
disassembled from blind to operate)
5. If correct, increase the position by one value and test
function. (Note: pretension will most likely need to be
increased also)
5. Erratic Behaviour / Blind falls. Spring Control on wrong
end. Remove and re-install on other end.
6. Fabric Tracking.
Fabric bunches up
or become unevenly
distributed.
Pull and raise hem bar from the middle. (Not from the sides)