rollease acmeda SS38 User manual

ASSEMBLY MANUAL
SS38 SYSTEM
January 2016
USA Australia Europe

CONTENTS
January 2016
DISCLAIMER
INTRODUCTION
This product specicaons manual has been produced by Rollease Acmeda to supply the necessary informaon for safe and correct assembly
and installaon of this system.
DISCLAIMER
Rollease Acmeda has used reasonable care in preparing the informaon included in this document, but makes no representaons or warranes
as to the completeness or accuracy of the informaon. Informaon is supplied upon the condion that the persons receiving the informaon
will make their own determinaon as to its suitability for their purposes prior to use. Rollease Acmeda assumes no liability whatsoever for any
damages incurred by you resulng from errors in or omissions from the informaon included herein. Rollease Acmeda reserves the right to
make changes without further noce to any products to improve reliability, funcon or design.
COPYRIGHT
COPYRIGHT © ROLLEASE ACMEDA 2015
All rights reserved. No part of this document may be reproduced or ulized in any means, by any means, electronic or mechanical including
photocopying, recordings, or by any informaon storage or retrieval system, without the express permission from Rollease Acmeda.
SECTION NO. DESCRIPTION
SECTION 1 - TOOLS AND ADDITIONAL ITEMS REQUIRED
SECTION 2 - SYSTEM SPECIFICATIONS
SECTION 3 - PREPARATION
SECTION 4 - ASSEMBLY
PART A - COATING AND ANODIZING DETAILS
PART C - FABRIC PREPARATION
PART A - OVERVIEW
PART B - SYSTEM OPTIONS
PART D - B.O.M.
PART C - DEDUCTIONS
PART E - LOW PROFILE MOUNTING AND SPOOL CALCULATION
PART B - ALUMINUM PREPARATION
1.1
2.1
3.1
4.1
3.1
3.1
2.1
2.2
2.3
2.2
2.3
3.1

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 1.1

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 2.1

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 2.2
00
0

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 2.3
2.95 in. min. - 9.8 in. max.Spool Spacing 19.6 in. max.
35.4 in.1.96 in. max.
1.97 - 2.59
Shade Width (feet)
2.60 - 3.24
3.25 - 3.90
3.91 - 4.56
4.57 - 5.21
5.22 - 5.87
5.88 - 6.52
6.53 - 7.18
7.19 - 7.84
7.85 - 8.49
8.50 - 9.15
9.16 - 9.80
9.81 - 10.46
10.50 - 11.12
11.13 - 11.77
11.17 - 12.43
12.44 - 13.12
Note: Each spool has a 2.2 lbs. weight capacity. Addional spools may be required.

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 3.1
1.49 inches
1.37 inches
.39 in
7.5 in

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 4.1
3
3
STEP 1a - ENSURE CORDS ARE ALIGNED

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 4.2

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 4.3
STEP 6 - TIE OFF CORD

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 4.4
STEP 7 - ENSURE KNOTS ARE ALL LEVEL
STEP 9 - SECURE SPOOLS TO HEAD RAILSTEP 8 - CUT OFF EXCESS CORD BELOW THE KNOT
* Quick tip: Leave 3"of cord to allow further adjustments to be made by
installer

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 4.5

SS38 SYSTEM Installaon Manual
January 2016
Rev. 1.0
©Copyright 2015
All Rights Reserved Rollease Acmeda (Internaonal Group)
Page 4.6