Sauder Orchard Hills 418651 User manual

NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-19
Français p 20-22
Español p 23-25
Lot # 369819 03/17/15
Purchased: __________________
Be sure to ive us a rin before
makin any returns. 1-800-523-3987
Multimedia Storae Cabinet
Orchard Hills Collection | 418651
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
Your digital bookshelf.

Table of Contents Assembly Tools Required
2-3
4-5
6-19
20-22
23-25
26
27
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
418651 www.sauder.com/servicesPae 2
Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
A END (2)
B RIGHT UPRIGHT (1)
C LEFT UPRIGHT (1)
D RIGHT LONG UPRIGHT (1)
E LEFT LONG UPRIGHT (1)
F TOP (1)
G BOTTOM (1)
H ADJUSTABLE SHELF (2)
I RIGHT DOOR (1)
J LEFT DOOR (1)
K BACK (1)
L FIXED SHELF (4)
M PINNED SHELF (4)
N LONG SHELF (1)
O FRONT SKIRT (1)
P SIDE SKIRT (2)
Q FRONT MOLDING (1)
R RIGHT MOLDING (1)
S LEFT MOLDING (1)
Adjustable Wrench

Part Identification Now you know
our ABCs.
418651www.sauder.com/services Pae 3
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
M
L
L
M
M
L
P
HA

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
418651 www.sauder.com/servicesPae 4
HIDDEN CAM - 10
1F CAM DOWEL - 10 2F
STRIKE PLATE - 2
6I
MOLDING
CONNECTOR - 2
19F
120K BACKPLATE - 2
LARGE RUBBER
SLEEVE - 1
58G
METAL PIN - 34
1R RUBBER SLEEVE - 8 2R
NAIL - 29
1N
TIE PLATE - 1
3G METAL
BRACKET - 1
17G ANGLE BRACKET - 9 27G
MAGNETIC CATCH - 1
1I
HIDDEN CONNECTOR - 12
5F
LOCK PACK - 1
3J
HINGE - 6
28H
116K KNOB - 2

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
418651www.sauder.com/services Pae 5
BLACK 1-1/8" MACHINE SCREW - 2
21S
BLACK 9/16" LARGE HEAD SCREW - 43
1S
SILVER 1-1/8" FLAT HEAD SCREW - 6
10S
BLACK 7/8" LARGE HEAD SCREW - 2
17S
CONNECTOR SCREW - 12
8S
BLACK 1-7/8" FLAT HEAD SCREW - 8
2S
BLACK 1/2" FLAT HEAD SCREW - 2
11S

Step 1 Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Insert a CONNECTOR SCREW (8S) into each
HIDDEN CONNECTOR (5F).
418651 www.sauder.com/servicesPae 6
å Use your hammer to tap a HIDDEN CONNECTOR with
SCREW into each of the lare holes in the RIGHT LONG
UPRIGHT (D)and LEFT LONG UPRIGHT (E).
å Repeat this step for the RIGHT UPRIGHT (B) and
LEFT UPRIGHT (C).
Step 2
8S
5F
E
D
(12 used)
5F
5F

å Push ten HIDDEN CAMS (1F) into the FIXED SHELVES (L),
and LONG SHELF (N). Then, insert the metal end of a CAM
DOWEL (2F) into each HIDDEN CAM.
Step 3
418651www.sauder.com/services Pae 7
L
L
L
L
N
Arrow
1F
2F
(10 used)
Arrow
1F
2F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tihten the HIDDEN CAMS in this step.

Step 4
å Tap two MOLDING CONNECTORS (19F) into the notches
in the MOLDINGS (Q, R, and S).
418651 www.sauder.com/servicesPae 8
19F
19F
S
QR
Flat end
Flat end
Use your hammer to tap the MOLDING CONNECTORS (19F) into the notches in the MOLDINGS.

å Fasten nine ANGLE BRACKETS (27G) to the FRONT
SKIRT (O) and SIDE SKIRTS (P). Use nine BLACK 9/16"
LARGE HEAD SCREWS (1S).
å NOTE: Be sure the edes of the ANGLE BRACKETS are
even with the edes of the SKIRTS.
Step 5
418651www.sauder.com/services Pae 9
P
P
O
Do not use
these holes.
BLACK 9/16" LARGE HEAD SCREW
(9 used in this step)
1S
(9 used)
Remember:
Rihty tihty.
Lefty loosey.
27G
27G
27G

Step 6
å Fasten the SKIRTS (O and P) to the BOTTOM (G). Use
seven BLACK 9/16" LARGE HEAD SCREWS (1S).
å Fasten the SIDE SKIRTS (P) to the FRONT SKIRT (O). Use
two BLACK 9/16" LARGE SCREWS (1S).
418651 www.sauder.com/servicesPae 10
P
P
O
G
Unfinished ede
Unfinished surface
BLACK 9/16" LARGE HEAD SCREW
(9 used in this step)
1S