Sealey PCT1 User manual

PLASMA CUTTING TABLE/WORKBENCH
MODEL NO: PCT1
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using the workbench.
9Locate workbench in a suitable area where it will not be an obstruction.
9Keep the general area clean, uncluttered and ensure there is adequate lighting.
WARNING! Erect unit on a level and solid surface such as concrete.
9Keep children and unauthorised persons away from the work area.
8DO NOT use the unit for any purpose other than that for which it is designed.
8DO NOT clean the unit with any solvents which may damage the surfaces.
9Ensure that the unit is properly and securely assembled before use.
2. INTRODUCTION
Mild steel plasma cutting table/workbench. 32 Replaceable cutting slats, order Model No. PCT1RS for a pack of 10 replacements.
 Removablesidehandles/cabletidyhanginghooks.Suppliedatpackedforeasyselfassemblyusinghandtools(notprovided). 
Supports weight capacity of 113kg.
3. SPECIFICATION
Model no.: .....................................................................PCT1
Assembleddimensions(WxDxH)....1065x600x812mm
Bench dimensions............................................920x600mm
Replacementparts:Slats(packof10) ..................... PCT1RS
4. CONTENTS
PCT1Issue2(1)21/05/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wearprotective
gloves
Wearsafety
footwear
Weareye
protection

5. ASSEMBLY
NOTE: It is recommended that two people are used to assemble this item.
NOTE: DO NOTfullytightenxingsuntilallareinplace.
5.1. Assemblemainbeams(g1.3,g.1.4)tothetablelegs(g1.5)usingxings(g1.11,1.12,1.13).Notepositioningofmain
 beams(seeg1).
5.2. Assemblesupportbeams(g1.6,g.1.7)tothetablelegs(g1.5)usingxings(g1.11,1.12,1.13).Notepositioningofsupport
 beams(seeg1).
5.3. Fixsidehandles(g1.2)usingxings(g1.8,1.9,1.10).
5.4.  Loadslats(g1.1)intotopframe.
5.5. Tightenallxingsandensurethestructureissound,stableandcapableofsafelycarryingaloadofupto113kg.
6. MAINTENANCE
6.1. Clean regularly using non-abrasive cleaner and a damp cloth.
6.2. Before each use check all parts and the integrity of the structure. If damaged or suspect, remove from service and take necessary
action to correct.
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Item Part no. Description
1 PCT1RS Replacementslats(Packof10)
2 PCT1.02 Removable side handle
3 PCT1.03 Main beam, short
4PCT1.04 Main beam, long
5 PCT1.05 Table leg
6 PCT1.06 Support beam, short
7PCT1.07 Support beam, long
8SS1025.S HxHdSetScrewM10x25mm
9 SWM10.S Spring washer M10
10 SN10.S Steel nut M10
11 SS825.S HxHdSetScrewM8x25mm
12 SWM8.S SpringwasherM8
13 SN8.S SteelnutM8
g.1
PCT1Issue2(1)21/05/21