Shelters4Less SR1605 User manual

Assembly Instructions
Shelter type: SR1605
SR1605-03-310516-UK
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]

Tools required:
Drill/Screwdriver
Mallet
Hack saw
1
2
3
14
13
18
19
4
6
16
17
16
12
9
11
3
5
8
7
10
8
EXPLODED VIEW
Tools included:
Spanner
Torx bit
ITEM
NO. PART NAME
DRG NUMBER LENGTH
Default/QT
Y.
1 S1 - Full Frame - SR S1
Default
5
2 CB1 Bracket CB1
Default
6
3 JF1 Bracket JF1
Default
6
4 S1 S1
Default
2
5 JF2 Bracket JF2
Default
4
6 RB1 Bracket RB1
Default
8
7 R5 R5
Default
1
8 R4 R4
Default
3
9 ST9 Roof Tie ST9
Default
2
10 JF3 Bracket JF3
Default
2
11 P4 P4
Default
1
12 L1 Bracket L1
Default
6
13 FT1 Bracket FT1
Default
3
14 FT3 Bracket FT3
Default
4
15
Seasling Strip -
2195mm
Sealing Strip
Default
6
16 PCE2 PCE1
Default
2
17 PCC2 PCE1
Default
1
18 RC2 - 4059 RAD - RC1
Default
4
19 2MD 2MD
2110 4
20 40x40 End cap BOUGHT IN ITEM
40 x 40 x 20
11

3
PARTS LIST
ITEM NO.
PART NO.
DESCRIPTION
SIZE
IMAGE QUANTITY.
1
S1
FRAME 2000 x 1035
6
2
CB1
CORNER
BRACKET
110 x 110
6
3
JF1 PLATE/BRACKET
130 x 30 x 3
4
4
S1 STUB
STUB 140 x 40 x 40 2
5
JF2 PLATE/BRACKET
130 x 30 4
6
RB1
BRACKET 110x46x40 8
7
R5
RAFTER 2159 x 40 x 40
3
8
R4
RAFTER
2159 x 40 x 40
1
9
ST9
ROOF TIE 1562 x 40 x 40 2
10
JF3
PLATE/ BRACKET 210 x 40 2
11
P4
POST 1995 x 40 x 40 1
12
L1
BRACKET 92 x 45 8
13
FT1
FOOT BRACKET 109 x 100 x40 3
14
FT3
FOOT BRACKET 109 x 100x 80 4
15
SS
SEALING STRIP TRIM TO 2205 3 ROLLS
16
PCE1
ROOF PANEL 2205 x 1050 2
17
PCC1
ROOF PANEL 2205 x 1030 1
18
RC1
ROOF STRIP 2205 x 60 4
19
2MD
ROOF TRIM TRIM TO FIT 5
20
EC40
PLASTIC END
CAP
40 x 40 9
Fittings Bolt set M10
Nut Washer
Black
Cap
T25 T50 AB1210
M10 X 60mm
25mm Tech
screw
50mm Tech
screw
M10 x 100mm Concrete
Bolt
Pack A+B
40 40 80 80 136 66 13
Required
39 39 78 78 64 40 7
Spare
1 1 2 2 72 26 6
Image

1035
3145
1075
A
Check the
dimensions
of the shelter to
ensure correct
alignment
GENERAL NOTE:
THE 50MM TECH SCREWS ARE
FOR FIXING ROOF STRIPS
(RC) ONLY
S1
CB1
JF1
CB1CB1
Ensure correct alignment on corners
DETAIL A
SCALE 1 : 5
JF1
JF2
CB1
S1 STUB
Step 1
Assemble S1 frames to make up the main structure using CB1 brackets
in the corners and JF1 brackets on the straight joints. Attach the S1 stub
as shown using JF1 , CF1 and JF3 brackets.
4

R4
R5
RB1
RB1 R5
R4
Step 2
Attach first R4 and R5 rafters using RB1 brackets on the back of the
shelter and ST1 stubs in the middle.
5

C
JF3
RB1
ST9
P4
DETAIL C
SCALE 1 : 4
JF3JF3
RB1RB1
Step 3
Assemble the T-frame using two ST9 tie bars and a P4 post. Join the two
ST9 bars together first using JF3 brackets, then attach the P4 post using
two RB2 brackets.
6

FT1
FT3
RB1
R4R4
L1
R4R4
RB1
L1
FT1
FT3
Step 4
Use L1 brackets to attach the T-bar to the front of the shelter and install
the remaining R4 rafters using RB1 brackets on the rear and L1 brackets
at the front. Attach the FT1 and FT3 brackets and move the shelter in to
its final position before using anchor bolts to secure it to the ground.
7

PCE2
PCE2
PCE1
SS
PCE2
PCE2
PCE1
SS
GENERAL NOTE:
THE 50MM TECH SCREWS ARE
FOR FIXING ROOF STRIPS
(RC) ONLY
Step 5
Stick sealing strips (SS) to the rafters and align the PCE2 panels to the outside
of the shelter and centralise the PCC2 panel in the centre. Apply more
sealing strips to the top of the roof panels, above the previous strips.
8

GENERAL NOTE:
THE 50MM TECH SCREWS ARE
FOR FIXING ROOF STRIPS
(RC) ONLY
2MD
RC2
RC2
2MD
Step 6
Screw down the RC2 strips directly into the rafter with the 50mm TEC
screws to secure the roof panels. Next, clip on the 2MD edge trim to the
edges of the roof panels. Then fit the Black plastic caps on exposed
nuts and bolts. Fit the square end caps (EC40) to any open ends of
box sections.
9

Notes:
10

995
1044.50
1035 1035
1044.50 1088.40
1048.40
3228 TO FOOT HOLE CENTERS
2187
3145
11
PLAN VIEW
OVERALL DIMENSIONS AND GROUND FIXING POSITIONS
Suggested size for concrete base:
200mm oversized on all sides

12
CONTACT DETAILS:
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]
Shelters4Less, Unit 3, 2 Lansdowne Crescent, Bournemouth, BH1 1SA
MAINTENANCE:
To ensure your product gives you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
All Parts and Fixings checked by:
Print Name: Signature: