Shelters4Less Derby User manual

Assembly Instructions
Shelter type: Derby
SR0060-01-011216
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]

4
6
8
7
1
2
3
5
2
Tools required: (Not supplied)
Drill/Screwdriver
Socket set
ITEM
NO.
PART
NO.
DESCRIPTION
DIMENSION IMAGE exsploded/QTY.
1
HTF-
001-
01
3
2
HSF-
001-
01
Side Frame
2
52
7
FT1
Foot Bracket
109 x 100 x 3 6
83
9
920 x 780mm 5
10 3

3
PARTS LIST & FITTINGS
EXTRA PARTS SUPPLYED FOR END PANEL OPTION
Fittings
M8 x
20
bolts
M10 x
60
bolts
M10 x
100
bolts
M10
Nylock
nuts
M8
Washer
M10
Washer
M12 x
100
Anchor
bolts
M12
washers
M10
Black
caps
M8
Black
caps
40 x 40
black
caps
Image
ITEM
NO.
PART NO.
DESCRIPTION
IMAGE
exsploded
/ QTY.
1
CHD1
Roof Frame
1
2
CHD1.1
Right Roof Frame
Holes drilled or right
side to attach to Side
Frame
1
3
CHD1.2
Left Roof Frame
Holes drilled of the left
side to attach to side
Frame
1
4
CHD2
Side Frame
2
5
CHD3
Back Square Frame
3
6
FT1
Feet
6
25mm Tech Screws 50
only supplyed with End
Panel Option
7
CHD end
sheet
Polycarbonate
sheeting
trinagle
2
8
CHD end
sheet
Polycarbonate
sheeting
Square
2
QTY.
12 616 22 12 44 6 6 50 12 4

Step 1
4
Take the other Back Square Frame and attach them side to side lining
up the holes in the positions shown below. Use the M100 bolt
2 people
recommended
to fit this shelter.
Take the left Side Frame and attach it to the Back Square Frame
lining it up in positions shown below using the M10x60 Bolts supplied.
Step 2

Step 3
5
Step 4
Take the Right Side Frame and attach it to the
Assembely lining it up in positions shown below
using the M10x60 Bolts supplied.
Take the two ouside Roof frames and loosly attach
them do the Back Square Frame then line up the
holes to atach it to the upper vertical Side Frames

6
Step 6
Do the same with the other sections but this time
you are attaching it loosly to Back Square Frame
and then bolting the side to thesides of each other.
Step 5
FT1 feet added at this point then it can be fixed into position.
Note: Add Plastic End Caps
at this point, all caps should
be used.
Polycarbonate sheeting parts will vairy depending on which model bought.

NOTES:

8
THANK YOU
FOR PURCHASING THIS PRODUCT
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]
Shelters4Less, Unit 3, 2 Lansdowne Crescent, Bournemouth, BH1 1SA
All Parts and Fixings checked by:
Print Name: Signature: