Shelters4Less SR1553 User manual

Assembly Instructions
Product code: SR1553
Doc. No.: SR1553-02-260916-UK
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]

1
7
6
13
11
10
12
5
8
9
4
2
3
EXPLODED VIEW AND TOOLS
2
Tools required:
Drill/Screwdriver
Mallet
Hack saw
Tools included:
Spanner
Torx bit
ITEM
NO. PART NAME
DRG NUMBER LENGTH
Default/QT
Y.
1 S1 - Full Frame - SR S1
Default
8
2 CB1 Bracket CB1
Default
8
3 JF1 Bracket JF1
Default
9
4 ST3 Roof Tie ST3
Default
1
5 RB1 Bracket RB1
Default
16
6 FT1 Bracket FT1
Default
2
7 FT3 Bracket FT3
Default
7
8 R1 R1
Default
5
9
Seasling Strip -
1075mm
Sealing Strip
Default
8
10 PCE1 PCE1
Default
2
11 PCC1 PCE1
Default
2
12 RC1 - 4059 RAD RC1
Default
5
13 2MD 2MD
2110 4
14 40x40 End cap BOUGHT IN ITEM
40 x 40 x
20 12

3
PARTS LIST AND FITTINGS
ITEM
NO.
PART
NO.
DESCRIPTION DIMENSION IMAGE QTY.
1 S1 Frame 2000x1035 8
2 CB1 Bracket 110x110 8
3 JF1 Bracket 220x40 9
4 FT1 Bracket 109x100x40 2
5 FT3 Bracket 109x100x80 7
6 RB1 Bracket 106x110x40 16
7 R1 Rafter 2000x1035 5
8 SS Sealing Strip 110x110x40 2 ROLLS
9 PCE1 Roof Panel 110x46 2
10 PCC1 Roof Panel 1030X1135 2
11 RC1 Roof Strip 2060x40x40 5
12 ST3 Roof Tie 2060x40x40 1
13 2MD
Roof Edge
Trim
106x110x80 5
15 EC40
Plastic
End Cap
40x40 12
Fittings Bolt set M10 T25 T50 AB1210
M10 x 60mm Nut Washer
Black
Cap
25 mm
Tech
screw
50 mm
Tech
screw
M10/12 x 100
mm Concrete
Bolt
Pack A+B 40 40 80 80 136 66 13
Required 19 19 38 38 100 30 9
Spare 21 21 42 42 36 36 4
Image

4180
1075
1075
A
Check overall dimensions
to ensure correct alignment
Please note 50 mm Tec Screws
are for roof panels only
CB1
JF1
S1 FRAME
DETAIL A
SCALE 1 : 7
CB1 UNDERNEATH
JF1 ON INNER
CB1CB1CB1CB1
Ensure correct
alignement on all corners
Step 1
Assemble S1 frames to make up the main structure using CB1 brackets
for the corners and JF1 brackets for straight joints. Also use CB1 and JF1
brackets to secure the ST3 tie bar.
4

RB1
R1
3.
1035 1035 1041 1029
FT3
FT1
1.
RB1
R1
Step 2
Move the Shelter to its final position and attach all FT1 and FT3 foot brackets.
Then a
ttach R1 roof rafters using RB1 brackets.
5
FRONT VIEW
2.

SS
PCE1
PCE1
PCC1
PCC1
PCE1
PCE1
PCC1
PCC1
SS
Step 3
Apply sealing strips (SS) to the top of the rafters then arange the roof panels by
lining up the end panels( PCE1 ) flush with the rafters and leaving a gap between
the middle pieces( PCC1 ). Apply more sealing strips to the top of the roof panels
directly aboe the strips on the rafters.
6

RC1
2MD
RC1
2MD
Step 4
Secure the roof panels in place by drilling the RC1 strips directly
into the frame of the shelter using the Tech 50 screws. Then
apply the 2MD edge trim along the bottom edges of the roof.
Push
fit the Black plastic caps on exposed nuts and bolts.
Use a mallet to fit the square plastic end caps to any open
ends of box sections.
7
GENERAL NOTE:
THE 50 mm TECH
SCREWS ARE
FOR FIXING ROOF
STRIPS(RC) ONLY

995
1056.50
2171.50 1035 1044.50
1044.50
1035 1035 1035
1135.59
4180
4251 TO FOOT HOLE CENTERS
8
GROUND ANCHOR POSITIONS AND OVERALL SIZE
SUGESTED SIZE FOR BASE: 200mm OVERSIZES ON ALL 4 SIDES
Scale 1:20

Notes:
9

Notes:
10

Notes:
11

12
MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fitting are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]
Shelters4Less, Unit 3, 2 Lansdowne Crescent, Bournemouth, BH1 1SA
All Parts and Fixing checked by:
Print Name: Signature