Shelters4Less SR1696 User manual

Installaon Manual
General Arrangement Drawing
WAITING SHELTER ALMER
Doc. no.: AWS-01-181016
Product Code: SR1696
SR1698
SR1697

side walls (Nr. 1 and 3 on General Arrangement Drawing):
- Use screw IMBO M10x25 screws (2 pcs on one side wall)
- After screwing bolts into the holes we put plastic caps fi20
Screw M10x25
Page 2of total 20
1.Start montage with installing the bottom beam (Nr. 2 on General Arrangement Drawing) to the

Plastic cap Fi 20
Page 3of total 20

2.After fixing the bottom back beam (Nr. 2 on General Arrangement Drawing) start fixing the upper
back and front beams (Nr. 4 on General Arrangement Drawing), using M12x25 bolts.
Screw M10x25
Page 4of total 20

3. Fix the steel construction of FRONT WALL (Nr. 5 on General Arrangement Drawing) with side
wall (Nr. 1 on General Arrangement Drawing) and with the front wall post (Nr. 7 on General
Arrangement Drawing) using screw M10x25
Screw M10x25
Nr. 5 On General Arrangement
Drawing)
Page 5of total 20

4. Fix the middle posts (Nr. 6 on General Arrangement Drawing) as with screws M10x25
NOTE: please make sure the M8 holes are from inside of the shelter in the bottom of the post.
On top use screw IMBO
M10x25
M8 holes from inside in
the bottom
Page 6of total 20

ScrewIMBO M10x25
in the bottom
Fixing of middle posts in the BOTTOM
Page 7of total 20

5.Next install the arched roof beams (Nr. 8 on General Arrangement Drawing). From the front and
the back use each side 5,5 x 16screw.
Screw 5,5x16
Screw 5,5x16
Screw 5,5x16
Page 8of total 20

6.Fix the roof tapes on two middle roof beams (Nr. 8 on General Arrangement Drawing) using
screw 5,5x16.
Fix the roof tapes on
two middle roof
beams using screw
5,5x16
Page 9of total 20

A ( 1 : 8 )
C ( 1 : 6 )
B ( 1 : 4 )
PARTSQUANTITY
NUMBER
Nefryt - left sidewall
11
Nefryt - bottom beam 205
1
2
Nefryt - right sidewall
1
3
Nefryt - roof beam 205
24
Nefryt - bottom beam 203
15
Nefryt - middle pillar
36
Nefryt - pillar of the smoking shelter
17
Nefryt - bow-shaped handle
28
Assembly foot
69
Screw M10x65610
Screw ST 5,5 x 16411
Screw M10 x 30 with nest to the hex key
2312
Pad B 10,5
2013
Nut M106
14
A
C
B
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
1 / 1
3
1
4
4
8
12
9
10 13 14
12 13
12
12
12
12
11
8
12
2
5
6
6
6
7
9
9
11
10 13 14
Waiting shelter - assembly
General Arrangement Drawing

7.Fix the polycarbonate with self drilling screw 6,3X25
Selfdrilling screw
6,3X25
Page 11 of total 20

8.INSTALL THE ANGLE FROM THE BACK SIDE AND FRONT OF SHELTER AND FIX WITH
SELF-DRILLING SCREW 6.3 X25
angle
Hole for SELF-DRILLING
SCREW 6.3 X25
Page 12 of total 20

9.FURTHER PROCEED AS BY A TYPICAL SHELTER, install:
-SEAT (BRACKETS + WOODEN DECKS)
-BACK SEAT SUPPORT
Page 13 of total 20

Page 14 of total 20

10.Install the toughened glass retaining brackets with Rivet nut 4,8 x10
Page 15 of total 20

11.Install the toughened glass
Rivet nut 4,8x10Rivet nut 4,8x10Rivet nut 4,8x10
Toughened glass
Seal for glass
Page 16 of total 20

Page 17 of total 20

Page 18of total 20
Layout:

NOTES
:
Page 19of total 20

MAINTENANCE:
To ensure your products give you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
CONTACT DETAILS:
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]
Shelters4Less, Unit 3, 2 Landsdowne Crescent, Bournemouth, BH1 1SA
All Parts and Fixings checked by:
Print Name: Signature:
Page 20 of total 20