Shelters4Less SR1603 User manual

Assembly Instructions
Shelter Type: SR1603
SR1603-02-260916-UK
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]

17
15
16
16
15
14
9
18
1
2
4
5
10
3
6
12
13
7
8
11
2
EXPLODED VIEW
Fittings Bolt set M10
Nut Washer
Black
Cap
T25 T50 AB1210
M10 x 60mm
25mm
Tech
screw
50mm
Tech
screw
M10 X 100mmC3
Concrete Bolt
Pack A+B
40 40 80 80 136 66 13
Required 38 38 76 76 60 30 7
Spare
2 2 4 4 76 36 6
Image
ITEM
NO. PART NAME
DRG NUMBER LENGTH
Default/QT
Y.
1 S1 - Full Frame - SR S1
Default
4
2 S3 - Half Frame - SR S3
Default
2
3 CB1 Bracket CB1
Default
4
4 FT1 Bracket FT1
Default
3
5 FT3 Bracket FT3
Default
5
6 JF1 Bracket JF1
Default
6
7 RB1 Bracket RB1
Default
10
8 L3 Bracket L3
Default
2
9 R3 R3
Default
5
10 B4 B4
Default
2
11 P3 P3
Default
1
12 JF3 Bracket JF3
Default
1
13 L1 Bracket L1
Default
8
14
Seasling Strip -
1075mm
Sealing Strip
Default
8
15 PCE1 PCE1
Default
2
16 PCC1 PCE1
Default
2
17 RC1 - 4059 RAD RC1
Default
5
18 2MD 2MD
2110 4
19 40x40 End cap BOUGHT IN ITEM
40 x 40 x
20 9

3
PARTS LIST
ITEM
NO.
PART
NO.
DESCRIPTION SIZE IMAGE QTY.
1
S1 FRAME 2000 x 1035 4
2 S3 FRAME 2000 x 517 2
3 JF1 PLATE / BRACKET 220 x 40 6
4 CB1 BRACKET 110 x 110 x 40 4
5 FT1 FOOT BRACKET 109 x 100 x 40 3
6 FT3 FOOT BRACKET 109 x 100 x 80 5
7 RB1 BRACKET 110 x 46
8
8 L3 BRACKET 73 x 38 x 3
2
9 R3 CURVED RAFTER 1035 x 40 x 40
4
10 L1 BRACKET 95 x 45 x3 8
11 B4 BEAM 2080 x 40 x 40 2
12 P3 POST 1996 X 40 X 40
1
13 JF3 BRACKET 220 X 40 1
14 SS SEALING STRIP Trim to suit 2 ROLLS
15 PCE1 ROOF PANEL 1150 x 1050 2
16 PCC1 ROOF PANEL 1150 x 1030 2
17 RC1 ROOF STRIP 1130 5
18 2MD ROOF EDGE TRIM Trim to fit 5
19 EC40 PLASTIC END CAP 40x40 10

4180
517
557
Use measurements to
ensure correct alignment
Make sure corners
are correctly
aligned.
CB1CB1
Step 1
Assemble S1 and S3 frames to make up the main structure using
CB1 brackets for the corners and JF1 brackets for the straight joints.
4
Please note 50mm Tec Screws
are for roof panels only

A
RB1
R3
L3
R3
RB1
L3
DETAIL A
SCALE 1 : 4
L3
R3
Step 2
Attach the R3 end rafters using L3 brackets at the front and RB1 brackets
for the rear.
5

B
T - section
DETAIL B
SCALE 1 : 3
RB1
JF3
B4
P3
JF3
B4
P3
RB1
Step 3
Assemble the T - section by attaching the B4 ties to the P3 post
using RB2 and JF3 brackets.
6

C
L1
DETAIL C
SCALE 1 : 6
L1
Step 4
Attach T-section using L1 brackets.

FT3
FT1
FT3
FT1
Step 5
Move the shelter to its final position and make sure it is square and level.
Then attach the FT1 and FT3 foot brackets and use anchor bolts to secure
the structure to the ground.
8

PCE1
PCE1
PCC1
PCC1
SS
PCE1
PCE1
PCC1
PCC1
Step 6
Apply Sealing strips (SS) to the rafters and line up the PCE1 roof panels
with the outside of the shelter and equally space the PCC1 panels
between the outer panels. Appy more sealing strips to the top of the
roof panels, directly above the first sealing strip.
9

2MD
RC1
RC1
2MD
Step 7
Screw down the RC1 strips using the 50mm Tech screws to secure
the roof panels in place. Then push the 2MD edge trim on to the bottom
edge of the roof panels. Fit Black plastic caps on exposed nuts and bolts
and fit the square plastic end caps to any open ends of box section.
10

4251 TO HOLE CENTERS ON FEET
477 478.90
526.50
1035 1035 1035 1044.50
2070 2070
4180
1146
11
PLAN VIEW
OVERALL DIMENSIONS AND GROUND FIXING POSITIONS
Suggested size for concrete base: 200mm oversized on all four sides.

12
CONTACT DETAILS:
Email : [email protected]
Web : www.shelters4less.co.uk
Tel : [phone]
Unit 3, 2 Lansdowne Crescent, Bournemouth, BH1 1SA
MAINTENANCE:
To ensure your product gives you many years of use we recommend that you:
THANK YOU
FOR PURCHASING THIS PRODUCT
Clean panels regularly with soapy water •
Ensure all fittings are tight (for example after a big storm) •
Touch up any exposed metal should it get scratched •
All Parts and Fixings checked by:
Print Name: Signature: