Sony PCS-TL50 Instruction Manual

3-991-479-11(1)
2004 Sony Corporation
Video Communication System PCS-TL50
Quick Connection Guide Using One Touch Dial For details on operations, refer to the Operating Instructions.
To begin with
Turn on your Video Communication System, and check the following to ensure that connection is
possible.
Is the picture of your camera
(local picture) on the display?
After checking...
Let’s connect
1Press the V, v, Bor b
button to select the
group.
2Press One Touch Dial
button 1to 6to select
the remote party.
The system dials automatically,
and establishes communication.
If the remote party is not
registered for One Touch Dial
Call a remote party manually,
referring to the Operation Guide.
If communication cannot be
established after a number of trials
The line registered for One Touch
Dial may not be used. Consult your
system administrator.
Main indicators that appear
during communication
Controlling a remote camera
Local microphone is cut off
Sending a still image
Receiving a still image
Sending or receiving an image of a computer
Receiving data of a whiteboard
When using the ISDN
Is the ISDN telephone number
displayed?
FAR
MIC
OFF
V/v/B/b (arrow) buttons
One Touch Dial buttons
IP
Dialing(IP)
OSAKA
0.0.0.0
Meeting starts!
Cancel
Press One Touch Dial
button 1to 6to select the
remote party.
When six or less One Touch
Dials are registered
Press.
When seven or more One Touch Dials are registered
Select a group. Press.
IP:012.345.678.912
ISDN
ISDN:012345678912
Dial
Bob John
234561
Phone Book
Detailed Dial
When using the LAN
Is the IP address displayed?
Note: Connection to a remote
party is impossible if neither the
IP address nor ISDN telephone
number is displayed.
T
W
+
PCS-RTL50
123
456
789
0
CONNECT/
DISCONNECT
HELP1 65432
ZOOM
INPUT SELECT
FAR/NEAR
RETURN
PinP
PandP VOL UME
MENU
BACK
SPACE
CLEAR
SYMBOL
ALPHA/NUM
WIDE MODE
BACK LIGHT
CAPTURE IMAGE
MIC
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
DISPLAY
SELECT
PC/VIDEOVIDEO CONF
ENTER
ON/OFF
IP:012.345.678.912
ISDN
ISDN:012345678912
Dial
Bob
34561
Phone Book
Detailed Dial
John
2
Phone Book
Detailed Dial
IP:012.345.678.912
ISDN:012345678912
Bob D John ABC
14 15 16 17 1813
Group2 Group3 Group4 Group5
Group1
Phone Book
Detailed Dial
IP:012.345.678.912
ISDN:012345678912
Bob D ABC
15 16 17 1813
Group2 Group3 Group4 Group5
Group1
John
14

T
W
+
PCS-RTL50
123
456
789
0
CONNECT/
DISCONNECT
HELP1 65432
ZOOM
INPUT SELECT
FAR/NEAR
RETURN
PinP
PandP VOL UME
MENU
BACK
SPACE
CLEAR
SYMBOL
ALPHA/NUM
WIDE MODE
BACK LIGHT
CAPTURE IMAGE
MIC
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
DISPLAY
SELECT
PC/VIDEOVIDEO CONF
ENTER
ON/OFF
Remote Control Guide: Operations available during communication
For details on operations, refer to the Operating Instructions.
Switching the picture on the display
Each press of VIDEO CONF switches
the picture.
Note: You can switch among the
available pictures only.
Switching on/off the local
microphone
Adjusting the sound
of the remote party
To increase
the volume
To decrease
the volume
Displaying the menu
available during
communication
DSB picture or
picture received
from a whiteboard
Picture of the
local or remote
camera
Still image
transmitted or
received
VOLUME
Adjusting the camera
zoom
To enlarge
the picture
To reduce
the picture
Monitoring the local and remote pictures
simultaneously
Press PandP once to enter the PandP mode, and
press it again to change the sizes of the pictures.
ZOOM
T
W
Selecting the displayed picture and
the camera
Display: Select the “Near” or “Far” picture
to be displayed on the display.
Control: Select the “Near Camera” or “Far
Camera” to be controlled.
Display Control
Display Control
Far Near
Camera
Changing the location of the window picture
Each press of PinP changes the location of the window.
Display
Ending the
conference
Presetting the camera angle
Press button 1 to 6 quickly to move the
camera to the preset position.
Hold down button 1 to 6 to preset the
current camera position.
Note: If you press button 1 to 6 quickly
when there is no preset setting, the camera
moves to the center position.
CONNECT/
DISCONNECT
No window Note: The PinP feature is
available during communication
only.
Note: The PandP feature is available during communication only.
“IPELA” and are trademarks of Sony Corporation.