Spectrum Industries Flex 372 Series User manual

0101909
5/16-18 Caster
037779
5/16-18 Glide
Flex Training Tables
(24" and 30" deep)
372XX
Assembly Instructions:
Tools Required:
Phillips screwdriver
Caster / Glide wrench (included)
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
(20) 026064
1/4-20 x 5/8" PHMS (1) 025069
Caster/Glide wrench
(2) 037749
Unit-to-unit brackets
4 Casters2 Glides / 2 Casters4Glides
Note: Flex Training Tables come with glides and/or
casters in any of these combinations
(4) 0103920
1/4-20 x 1/2" Thumbscrews
1. Table Assembly
A. Place work surface face-down onto a non-abrasive surface.
B. Attach the legs to the work surface using 1/4-20 x 5/8" PHM screws and tighten securely. Figure 1.
C. Attach the casters and/or glides to the legs. Glides attach to the longer 28" tall legs, and casters will attach to the
shorter 27" tall legs. Tighten securely with caster/glide wrench.
D. If tables are to be connected together, attach the
unit-to-unit brackets as shown in Figure 1A.
E. Carefully flip the table upright-this may require two people.
Figure 1
4Glides
Unit-to-unit
brackets
2 Glides / 2 Casters
4 Casters
Figure 1A
Attach legs with
1/4-20 x 5/8" PHM screws
Casters attach to
shorter leg
Glides
0106709X Page 1 of 2

Figure 2
1/4-20 x 5/8" PHMS
(2 Req'd)
Unit-to-unit bracket
Work surface #1
Work surface #2
A. If moving a table with the glide/caster combination, unlock the casters,
and pick the table up from the glide-side and move.
B. Be sure to lock all casters after moving.
3. Moving tables
A. Arrange the tables side-to-side in the preferred location.
B. Attach the unit-to-unit brackets to both table work surfaces as shown with
1/4-20 x 5/8" PHM screws and tighten securely. Figure 2.
Note: If a more temporary arrangement is preferred, the easily removable 1/4-20
thumbscrews can be used on the unit-to-unit brackets instead of Phillips Screws.
2. Connecting tables together (optional)
0106709X Page 2 of 2