tau K125M Operating and maintenance instructions
1
K125M
GUIDA ALL’INSTALLAZIONE
INSTALLATION GUIDE
INSTALLATIONSANLEITUNG
NOTICE D’INSTALLATION
GUÍA PARA LA INSTALACIÓN
K125M
Quadro di comando per motoriuttore T-ONE5B
Control panel for T-ONE5B gearmotor
Steuerplatine für den getriebemotor T-ONE5B
Logique de commande pour motoréducteur T-ONE5B
Panel de mandos para motorreductor T-ONE5B
Via Enrico Fermi, 43 - 36066 Sandrigo (VI) Italia
Tel +39 0444 750190 - Fax +39 0444 750376
info@tauitalia.com - www.tauitalia.com
IT - Istruzioni originali
D-MNL0K125M 04-08-2011 - Rev.06
14
K125M
English
15
K125M
(Fixed safety edge)
1= SENSITIVE EDGE, 3= COMMON
(Photocell)
IN SERIES2= PHOTOCELL.
(Stop)
4= COMMON, 5= STOP.
(Open/Close)
5=
OPEN/CLOSE.
(Pedestrian)
7= PEDESTRIAN.
(Photocell RX )
8= NEGATIVE, 9= POSITIVE.
(Photocell TX)
10= NEGATIVE, 11= POSITIVE.
(Flashing light)
12= NEGATIVE, 13= POSITIVE.
(Gate open warning light)
14= NEGATIVE, 15= POSITIVE.
(2nd radio channel)
(Antenna)
18= EARTH, 19= SIGNAL.
16
K125M
20= NEGATIVE, 21= POSITIVE.
Blue= 0 Vdc (GND), brown= 5 Vdc (+5V), white= ENCODER SIGNAL (ENC).
Turning the trimmer clockwise (+) increases the motor torque, turning it anticlock-
wise (-) reduces it.
or
17
K125M
N.B.: to be used when the photocells are not used.
Gate contact open:
Bistable function active:
Monostable function active for 2 sec.:
Monostable function active for 180 sec.:
Check the mains power supply, charge the battery, replace the battery;
Disable phototest (dip-switch 6 OFF), check operation and connection of photocells;
Check the thermal-magnetic circuit breaker (upstream from system), check the fuses;
Gearmotor has exceeded absorption limits, check for obstacles across the path of the gate, check
the current absorption of the motor when loadless and under load;
Check wiring, check encoder through TEST-ENCODER (optional), verify that the motor turns
freely if powered directly by the battery, check fuse F2;
Make sure there are no obstacles across the path of the gate and that it slides smoothly;
Execute memorization procedure.
check wiring, check that the motor rotates freely when powered directly by battery, check fuse F2.
18
K125M
Clock function:
“Open only” function:
“Gate contact open” function:
19
K125M
44
K125M
45
K125M
Other manuals for K125M
1
Table of contents
Other tau Control Panel manuals
