Teknik Industrial Style Chunky Desk 5422097 User manual

www.teknikoffice.co.uk
Industrial Style Chunky Desk
|Model 5422097
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Be sure to give us a ring before
making any returns. 1-800-445-1527
For all your
newfangled gadgetry.
Teknik

Table of Contents
Part Identification
åUse this part identification to help identify the parts.
2
3-5
6
7
8-10
11
Part/Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hardware Identification
A TOP (1)
B SHELF (4)
C METAL FRAME (2) A
B
CB
C
B
B
FASTENER - 16
1
Page 2

Step 1
A
C
C
1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratching your unit or the floor.
å Fasten two METAL FRAMES (C) to the TOP (A).
Turn eight FASTENERS (1) through the METAL FRAMES
and into the TOP.
(8 used)
Just think. The sooner
you do this, the sooner
you do something else.
Page 3
The LEGS will
overhang this
end more.

å Fasten the SHELVES (B) to the METAL FRAMES (C). Turn
eight FASTENERS (1) through the METAL FRAMES and
into the SHELVES.
Step 2
Hey! It's starting to look
like something!
A
B
B
B
B
1
(8 used)
C
C
Page 4

Step 3
å Carefully stand your unit upright.
å NOTE: Please read the back pages of the instruction booklet
for important safety information.
å This completes assembly. Clean with a damp cloth. Wipe dry.
15 lbs.
25 lbs.
40 lbs.
15 lbs.
25 lbs.
Page 5

WARNING
Please use your furniture correctly and safely. Improper use can cause safety hazards,
or damage to your furniture or household items. Carefully read the following chart.
Look out for: What can happen: How to avoid the problem:
• Overloaded shelves or drawers.
• Improper loading can cause the product
to be top-heavy.
• Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves and drawers can
break.
• Never exceed the weight limits shown in
the instructions.
• Work from bottom to top when loading
shelves and drawers. Place the heavier
items on the lower shelves or in lower
drawers.
• Improperly moving furniture that is not
designed and equipped with casters. • Furniture can tip over or break if improperly moved.
• Physical injury. Furniture can be very
heavy.
• Breakage of tops - particularly with
double pedestal furniture (drawers at both
ends).
• Unload shelves and drawers from top to
bottom before moving the unit.
• Do not push furniture, especially on a
carpeted floor. Have a friend help you lift
the item and set it in place.
• Provide support to the center section of
the top when lifting the furniture.
• Placing TVs on furniture items that are
not designed to support a television is
hazardous.
• Risk of injury or death. TVs can be very
heavy. Plus the weight and location of the
picture tube tends to make TVs unbalanced
and prone to tipping forward.
• This product is not designed to support a
television.