unGer OmniClean DUAL BUCKET KIT User manual

DUAL BUCKET KIT
Unger OmniClean Dual Bucket Kit
PART NO.:
CLBK1
CASE QTY.:
1
• EFPL3 Straight Pole
• CLMPH Pad Holder
• CLMFP Microfiber Pad (2)
• 21483 Carriage with Wringer
• 21375 Gray Bucket
• 21387 Blue Charge Guide
• 21533 Gray Scrub Board
• 21531 Gray Bucket Handle
• 21526 Blue Bucket Handle
• 21572 Straight Carriage Handle
• 17891 Casters (4)
• SCCS0 SmartColor
Rectangular Labels (2)
When mopping is complete, empty buckets into utility sink
and rest Excella mop head on clean charge bucket with
mop handle in carriage handle for transportation.
Step 8
HOW TO CLEAN WITH OMNICLEAN
Step 7
Step 6
When mop pad is dirty, insert into scrub board bucket and
scrub debris off pad.
Lit. # 21837 02/2020
Insert mop into wringer, wring mop 2x making sure to
completely pull mop out of wringer each time.
Place mop on the floor and mop in an “S” motion.
Step 5
1
2
ungerglobal.com

Place scrub board bucket on Unger logo side and charge
bucket on the opposite side.
(Grey = scrub board, blue = charge)
Bucket Setup
Insert mop into clean charge bucket with mop pad facing
the carriage to moisten the pad.
Caster Installation
Push casters firmly into the base of the carriage.
ASSEMBLY
x4
Mop Head Installation
Press metal pins on mop pad holder into the base of the
Excella pole until you hear a click.
Handle Installation
On the handle, press metal pins and guide into the carriage
base until you hear a click.
Step 1
HOW TO CLEAN WITH OMNICLEAN
Step 5
Step 2
Adjust the height of Excella pole to chin height: tighten the
locking collar. *Excella pole may vary
!
Insert mop into wringer, wring mop 2x making sure to
completely pull mop out of wringer each time.
Step 3
Fill scrub board bucket with water to the fill line then place
bucket on carriage. Fill clean charge bucket with water and
cleaning agent to fill line, place on carriage.