unGer OmniClean User manual

DUAL BUCKET KIT OFFSET
Unger OmniClean Dual Bucket Kit Offset
PART NO.:
CLBK2
CASE QTY.:
1
• Offset Pole
• Pad Holder
• Microfiber Pads (2)
• Carriage with Wringer
• Gray Bucket
• Blue StayClean Guide
• Gray Scrub Board
• Gray Bucket Handle
• Blue StayClean Bucket Handle
• Straight Carriage Handle
• Casters (4)
• SmartColor Rectangular Labels (2)
HOW TO CLEAN WITH OMNICLEAN
Step 7
Step 6
When mop pad is dirty, insert into scrub board bucket and
scrub debris off pad.
Lit. # 22183 01/2021
Insert mop into wringer, wring mop 2x making sure to
completely pull mop out of wringer each time.
Place mop on the floor and mop in an “S” motion.
Step 5
1
2
ungerglobal.com
When mopping is complete, empty buckets into utility sink
and rest Excella mop head on clean charge bucket with
mop handle in carriage handle for transportation.
Step 8
View our OmniClean Video Here

Place scrub board bucket on Unger logo side and
StayClean bucket on the opposite side.
(Grey = scrub board, blue = StayClean)
Bucket Setup
Insert mop into StayClean bucket with mop pad facing the
carriage to moisten the pad.
Caster Installation
Push casters firmly into the base of the carriage.
ASSEMBLY
x4
Mop Head Installation
Press metal pins on mop pad holder into the base of the
Excella pole until you hear a click.
Handle Installation
On the handle, press metal pins and guide into the carriage
base until you hear a click.
Step 1
HOW TO CLEAN WITH OMNICLEAN
Step 5
Step 2
Adjust the height of Excella pole to chin height: tighten the
locking collar. *Excella pole may vary
!
Insert mop into wringer, wring mop 2x making sure to
completely pull mop out of wringer each time.
Step 3
Fill scrub board bucket with water to the fill line then place
bucket on carriage. Fill StayClean bucket with water and
cleaning agent to fill line, place on carriage.