UNIS WORK ZONE User manual

Operation Manual
IMPORTANT

Work Zone GMP Manual
08/25/2022
1
WE ARE HERE TO ASSIST
For parts and service
Have Questions? Contact us!
UNIS SERVICE CENTER
Tel: [phone]
Email: [e-mail]
www.unispartsandservice.com

Work Zone GMP Manual
08/25/2022
2
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.......................................................................3
1. SPECIFICATIONS....................................................................................................5
2. CONTENTS OF THE ACCESSORY KIT................................................................... 6
3. PART NAME............................................................................................................7
4. SET UP & INSTALLATION...................................................................................... 8
5. HOW TO PLAY......................................................................................................13
6. GAME OPTION..................................................................................................... 14
7. TROUBLESHOOTING............................................................................................20
8. MAINTENANCE & INSPECTION.......................................................................... 24
WIRING DIAGRAM

Work Zone GMP Manual
08/25/2022
3
Thank you for purchasing Work Zone GMP. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE,NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Work Zone GMP Manual
08/25/2022
4
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire.
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Work Zone GMP Manual
08/25/2022
5
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz;
Min. Power consumption: 150W
Max. Power consumption: 200W
Dimension: H84.13×W39.46×D65.75 in
H2137 ×W1002.4 ×D1670 mm
Weight：Approximately 617.29 lb/ 280kg
Model No: T-376
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game specifications are subject to change without notice.

Work Zone GMP Manual
08/25/2022
6
2. CONTENTS OF THE ACCESSORY KIT
Open the package and make sure all the items are included:
Following accessories
NOTE: Part models are subject to change without notice.
No.
Code No.
Name/SPEC
Picture
Qty
1
/
Manual
1
2
/
Power cord
3M
1
3
2.19.01.000004A
Fuse
Ф5×20mm T5A
250VAC
2
4
2.53.00171002
171A key
2
5
2.53.00172002
171B key
2

Work Zone GMP Manual
08/25/2022
7
3. PART NAME
Key Components

Work Zone GMP Manual
08/25/2022
8
Leveler
Leveler
About 0.2 in/5mm
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid.
Place the unit on a dry level surface.
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this game on a flat surface. If the game is installed on an unsuitable floor, it could
cause game malfunction.
To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it
touches the floor, lifting the casters off the ground by 0.2 in/5mm. Repeat the same for all
levelers.
We do not recommend using power tools as they may cause damage.
NOTICE
Make sure the machine is level.
NOTICE
Leveler
Leveler

Work Zone GMP Manual
08/25/2022
9
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 500 mm
Service area
Play area
Your unit must be leveled to operate properly.
NOTICE

Work Zone GMP Manual
08/25/2022
10
4.4 Machine Installation
Step 1 Open the front glass.
Step 2 Install Marquee frame and Marquee plastic to the top of the cabinet. Connect the
connectors.
Glass door
Marquee frame
Marquee plastic

Work Zone GMP Manual
08/25/2022
11
Step 3 Utilize tools to remove Crane cable tie. Close the Glass door.
Step 4 Install excavator POP board to the back of the Marquee.
Cable tie
Excavator POP board

Work Zone GMP Manual
08/25/2022
12
Step 5 Align the Seat assembly to the cabinet. Utilize screws to secure. Connect the
connectors.
Finish!
4.5 Card Reader Installation Safety Notice
Take precaution to assure that all wiring voltages are confirmed prior to installation
of card reader. All warranties are void if not properly installed resulting in logic board
damage.
Important: This game is pre-wired to AAMA standards. It is highly recommended to utilize
this wiring for Card reader installation.
Seat assembly
Cabinet

Work Zone GMP Manual
08/25/2022
13
5. HOW TO PLAY
1. Insert coins to play. Control the car to collect building block to the destination.
2. Toy tower making after collect building block to the destination.
3. Activate Clawing Game after driving the car to the destination.
4. Turn the steering wheel to control crane left& right. Pull the rod down, the crane falls
down and grab the prize.
5. Claws grab the gift rise to the top, then move to the prize exit to release the prize,
players win the prize.

Work Zone GMP Manual
08/25/2022
14
6. GAME OPTION
6.1 Adjustment button instruction
6.1.1 Main menu 6.1.2 Basic Setting
6.1.3 Customized Setting
Options
Basic Setting
Customized Setting
Input Test
Output Test
Game Reset
Date/Time Setting
Language/语言
Bookkeeping
Daily Record
Back To Game
Options
Status
Free Play
OFF_ON
Demo Music
OFF_ON
Memory Save
OFF_ON
Volume
1_10
Coins Per Game
1_10
Pay Mode
Coins_Card_Insert
Coins/Tap Card
Back&Save
Back
Options
Status
Game Time(s)
40~480
Ordinary Candy House Quantity
1_100
Luxury Candy House Quantity
1_100
Extreme Luxury Candy House Quantity
1_100
Gift Mode
Gift Time_Candy Time
Grasp Gift Mode
Time Mode_Plays Mode
Grasp Gift Time
10_60
Grasp Gift Chances
OFF_1-10
Grasp Gift Times
OFF_1-10
Reset
Open the coin door and there is a
meter panel. Press Settings button to
enter the setting menu.
Settings
Test

Work Zone GMP Manual
08/25/2022
15
6.1.4 Input Test 6.1.5 Output Test
6.1.6 Game Reset 6.1.7 Date/Time Setting
6.1.8 Bookkeeping
6.1.9 Daily Record
Options
Status
Coin
OFF_ON
Pull Rod Down
OFF_ON
Gift infrared
OFF_ON
Wheel ADC
0-255
Back
Options
Factory Restore
Reset Basic Setting
Reset Customized Setting
Clear All Records
Clear Unused Coins
Back
Options
Gift Door Light
Inside Upper Light
Back
Player Coins Present Present Payout
Back
Date Weekday RunTime Coins Present Present Payout
Prev. Page
Next Page
Clear
Back
Options
Year
Month
Day
Hour(24)
Minute
Second
Back&Save
Back

Work Zone GMP Manual
08/25/2022
16
6.2 Claw Setting Menu
Keyboard instruction
After entering the menu, use the keyboard to control display cursor to up, down, left and
right to choose, press “Confirm” button to enter or save.
Options
Description
L
Move display cursor to left
R
Move display cursor to right
up
Move display cursor to up
Down
Move display cursor to down
Enter
Key button to enter setting menu from gameplay
Confirm
To confirm every selection
6.2.1 Main menu
Options
Accounts
SetUp
Test
SysInfo
Exit
6.2.2 Accounts: operation records are included as below
Options
Description
Coins
The total number of coins inserted.
Games
The number of game rounds.
Gifts
The number of prize out.
Last Win
The number of prize out after adjusting the grip (error
times/accurate times).
Coin in
The number of coins inserted on site.
MobilePay
The total number of coins that are scanned by mobile phones of all
connected machines.
Pool
The value of each game is increased by 1, the value of the winning
prize rate is reduced for each prize.
Open front door with door key, there is
a Keyboard. Press “Enter” button to
enter the setting menu.

Work Zone GMP Manual
08/25/2022
17
6.2.3 Set Up: Basic set up & Advance set up are included as below
Basic set up
Enter the Advanced settings, enter the password (initial password “80000000”), then press
the Confirm button to enter.
Options
Adjustable value
Default
Description
Game time
30-60 Sec
60 Sec
The game time of each round.
Coins/game
1-20
1
The number of coins for each game.
Win Rate
2-999
2
Set how many rounds of the game to win a
prize.
*: (If you change the Win rate, the number of players' games will not be cleared, and will be
counted in the next round of winnings.
If you need to calculate from O, please clear the account).
Game mode
Keep/Lck/Rnd
Keep
Set the game mode.
Please see 8.3 for detail instruction.
Max Pwr Cnt
(Assuring
times)
0-5
5
0 means that when the strong claw power
comes, there will be an unlimited number of
powerful claw until win the prize;
1 means when the strong claw power comes,
if cannot win the prize, will only give 1
chance for strong claw power.
Claw Strength
Please see
6.2.3.1
/
Adjust claw power
Drop
Mode A/
Mode B/Mode C
/
Drop the prize
Please see 8.4 for detail instruction.
Cable length
/
/
Adjust the descending length of the claw to
the bottom of the prize.
Move speed- X
Speed
(Left and right)
40-100
75
Motor speed.
The larger the value, the faster the speed.
Move speed- Y
Speed
(Front and rear)
40-100
85
Motor speed.
The larger the value, the faster the speed
Move speed- Z
Speed
(Up and down)
40-100
40
Motor speed.
The larger the value, the faster the speed
Position
X: Y:
/
The Prize drop position.
Key delay
0-99ms
0ms
There is a delay when using the joystick.
CLED
UnSync/Mst/Slv
UnSync
Color LED
Clear Bill
Clear accounts and player play times.
Password
Modify the password to enter the advanced
setting.
Note: Basic set up initial passwords can be changed by operator in
“Password” option

Work Zone GMP Manual
08/25/2022
18
Advance set up (Special for Factory Service Usage)
Enter a 8 digits password (initial password “53712896”), then press “Confirm”
button.
Note: Advance set up initial passwords can not be changed in any way!
Options
Adjustable value
Default
Description
Save Len
0-100
/
Safety length.
C2 TIME
50-995
/
Release claw time.
Origin
LF/LB/RF/RB
Adjust the claw.
Backup
ON/OFF
POSAVEA
ON/OFF
POSAVEB
ON/OFF
LedMode
ON/OFF
SellCard
ON/OFF
LSpeedCan
ON/OFF
Voltage
Claw voltage.
Safeguard
Link Set
PayModule
Factory Reset
Language/中文
Back
Do not recommend to change here without consulting UNIS factory
servicing center. Change settings may cause the machine to be faulty.
Factory settings already set these data with a proper default, therefore do
not recommend.
NOTICE

Work Zone GMP Manual
08/25/2022
19
6.2.3.1 Claw Strength
6.2.4 Machine test
6.2.5 System Information
Options
Adjustable value
Default
Description
C1 Force
1-48
40
The power of close the claw after it down
and raised
C2 Force
1-48
38
The transitional claw power, starting
shaking prize power.
C3 Force
1-48
39
The power of close the claw when the
claw returns back the origin after rising.
C4 Force
1-48
45
The claw closing power (strong claw) in
the whole game.
C2 height
1-9
6
The height of the prize to be picked up; 1
means highest; 9 means lowest.
Catch Test
Move the joystick, press the start button
and lower the claw to test whether the
claw power is correct.
Auto Set
Adjust the claw automatically.
Please see 2.3 for detail instruction.
Options
Description
Win signal
Automatic test
Coin signal
F/B move
L/R move
Up Move
Down Move
Music Test
Mantest*(Manual test)
Move joystick to test claw move. Long press the button
and turn the joystick up/down to control claw up/down.
Press the button twice to leave.
Options
Description
Information
Version
Software version
Date
Software update date