Universal Space Panning for Gold User manual

Operation Manual
www.universal-space.com
(Ticket Version)

Panning for Gold (GMP Ticket ver.) Manual
1
Non-technical personnel who do not have technical knowledge and
Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries. All repairs must be performed to original
manufacturer specifications.
WARNING: To reduce the risk of fire, electric shock or personal injury,
unplug or disconnect the machine from the power supply before
servicing.
CONTENT
IMPORTANT SAFETY INSTRUCTIONS................................................................ 2
1. SPECIFICATIONS.............................................................................................. 4
2. PACKAGE CONTENTS...................................................................................... 5
3. PART NAME...................................................................................................... 6
4. SET UP & INSTALLATION................................................................................ 7
5. HOW TO PLAY ................................................................................................10
6. GAME OPTIONS .............................................................................................11
7. ERROR MESSAGE AND RECOVERY ............................................................14
8. MAINTENANCE, INSPECTION.......................................................................15
9. OVERALL CONSTRUCTION ........................................................................... 17
10. Decal.............................................................................................................42
WIRING DIAGRAM .............................................................................................45

Panning for Gold (GMP Ticket ver.) Manual
2
Thank you for purchasing Panning for Gold from Universal Space.We
hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your
game machine properly and safely. It is intended for the owner and/or personnel in
charge of product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical
personnel should under no circumstance attempt to service the machine. Contact
your distributor or manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when
not in use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning.
Depending on the potential hazardous degree, the terms: NOTE, NOTICE, and
WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the
problem.
WARNING: A WARNING indicates a potential for product damage or serious personal
Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Panning for Gold (GMP Ticket ver.) Manual
3
Use the following safety guidelines to help ensure your own personal safety and to
help protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install
outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER
SPECIFICATIONS. FAILURE TO DO SO VOID ALL WARRANTIES AND
OPERATOR ASSUMES ALL RISKS.
Note: The contents of this manual may be updated without notice.

Panning for Gold (GMP Ticket ver.) Manual
4
1. SPECIFICATIONS
Rated power supply: AC110V 50Hz/60Hz；220V 50Hz/60 Hz
Min. Power consumption: 170W
Max. Power consumption：200W
Dimensions：W1100×D1420×H2010 (mm)
Weight：Approximately200kg
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: The contents of this manual may be updated without notice.

Panning for Gold (GMP Ticket ver.) Manual
5
2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
1 x Body Assembly
Following accessories
No Part No. Code Name Spec. Qty Note
1 P121-440-000 21901000012 Fuse Φ5×20mm T5A
250VAC 2 For 220V
2 P121-611-000 21901000030 Fuse Ф5×20mm
T10A 125VAC 2 For 110V
3 P121-749-000 41440000053 Manual English 1
4 P121-499-O00 25300172002 Key 171B 2
5 P121-601-000 25300171002 Key 171A 4
6 P121-602-000 25302000010 Key AY05 2
7 P121-485-000 22604000012 Micro SW SM-3A/125-25
0VAC 1
8 P121-484-000 21501000046 Sensor OJ310201 2
9 P121-413-000 23404000102 DC motor TG38-12V-20R
PM
1
10 P121-412-000 23404000098 DC motor JL-38F520-225
12V 24RPM 1
11 P121-411-000 23404000095 DC motor
JL-38F520-445
12V 6.5RPM 1
12 P121-603-000 40607000015 Wrench CR-V1.5mm 1
13 P121-604-000 40607000013 Wrench CR-V2.5mm 1
14 P121-605-000 40607000014 Wrench CR-V3mm 1
15 P121-606-000 40610050005 Weight 50g 1
16 P121-607-000 20611413002 Nugget (L)
50
17 P121-608-000 20611413003 Nugget (M)
100
18 P121-609-000 20611413004 Nugget (S)
200
19 P121-610-000 206114133030
Diamond 4
If any items are found to be missing, please contact your sales
representative for help immediately.
NOTE: Part models are subject to change without notice.

Panning for Gold (GMP Ticket ver.) Manual
6
3. PART NAME
Bonus display
S
p
eaker
Weighing platform
Service door
Jo
y
stick
Confirm Button
Marquee
Coin entrance
T
icket dis
p
enser

Panning for Gold (GMP Ticket ver.) Manual
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 2) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or
by wall.
4.1 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service Area: 500mm
Play Area: 500mm
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to
level the game. If the game is installed on an unsuitable floor, it could cause game
malfunction. To secure the game, adjust the Leveler down until it touches the floor,
lifting the casters off the ground by 5mm. Repeat the same for all levelers.
Leveler Caster
Move
About 5 mm
Fix
Play zone
Passage way
Pla
y
zone
Service Area
Service Area
Passage way
Make sure the machine is level with the ground and all the adjustable legs should stick
to the floor closely.

Panning for Gold (GMP Ticket ver.) Manual
8
4.3 Transporting the Machine
If you need to move the game, adjust the levelers back to an “up” position so the
casters touch the ground.
NOTICE
Be careful not to damage the machine during transport.
The machine should be handled with care when bringing it down from a higher
level.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.4 Connecting Power
WARNING: Check the voltage rating before you connect the
equipment to an electrical outlet to ensure that the required voltage and
frequency match the available power source. Please refer the label of the
machine.
Do not plug the equipment power cables into an electrical outlet if the power
cable is damaged.
Avoid putting many loads on one electrical outlet as it could generate heat and
fire resulting from overload.
Connect the grounding conductor to the earth terminal (GND):









Leveler Caster
Fix
Power socket
Power outlet
Power plug
Power cord
Power plug

Panning for Gold (GMP Ticket ver.) Manual
9

WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game
cabinet does not sit on the power cord as this could damage the cord and become
hazardous.
To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the
cord.
To prevent electric shock, do not touch the power plug when hand is wet.
Ensure that nothing rests on the power cord and that it is not located where it can be
stepped on or tripped over.
4.5 Water Level Checking
The payout will be effected directly by the water level in the tank. If water is too low, it
will be more difficult to catch nuggets and lower payout percentage. If water is too
much, it will make the payout percentage higher. So it is suggested to check the water
in regular time.
1. Use distilled water
2. Add all nuggets from the accessory part to the sink evenly. 200 small nuggets,
100 middle nuggets, 50 large nuggets and 4 diamonds.
3. Open A valve to drain. Close the valve after draining the water or adding water and
assure no leaks.
Water line label
NOTICE
A

Panning for Gold (GMP Ticket ver.) Manual
10
5. HOW TO PLAY
1. Insert coin. Control the joystick to move the arm.
2. Aim for the nugget and press the button to collect as many as you
can.
3. Weight the gold and pay out tickets accordingly.

Panning for Gold (GMP Ticket ver.) Manual
11
6. GAME OPTIONS
Check the attached I/O chart and schematic diagram, PC plan available machine
input and output correspond to each connection position. Based on the DIP
adjustment can be set the machine control signal.
DIP regulating reference I/O list, capital letters for factory Settings, and user can
adjust by themselves according to the operation condition.
Button function on counter:
Test Button：Auto completes game play detection.
Service Button: One credit
Reset Button：Clear tilt alarm error code
Main Board

Panning for Gold (GMP Ticket ver.) Manual
12
IO Settings
SW1
SW2
Item Content 1 2 3
Coin
per
game
1 ON ON ON
2 off on on
3 on off on
4 off off on
1/2 on on off
1/3 off on off
1/4 on off off
Free play off off off
Item Content 4 5
Demo
music
120s on
on
180s off
on
240s on off
OFF OFF
OFF
Item Content 6 7
Mercy
ticket
0 ON
ON
1 off
on
2 on off
3 off
off
Item Content 8
Claw
Mode *
AUTO ON
Semi-auto off
Item Content 1
Game
mode**
Fixed
Play ON
Timed
play off
Item Content 2 3
Times
per
game
1 on on
2 off on
3 ON OFF
4 off off
Item Content
4 5 6
Game
time (s)
20
on
on
on
36
off
on
on
45
ON
OFF
ON
50
off
off
on
60
on
on
off
70
off
on
off
80
on
off
off
100
off
off
off
Item Content 7 8
Weight
setting***
A ON ON
B off on
C on off
D off off
* Note:
AUTO: Claw will close automatically when it goes down into the tub.
Semi-auto: Press the button again to close the claw when it goes
down into the tub.
** Note:
Fixed Play: Play by times base on the setting in "Times per game".
Timed play: Play by second base on the setting in "Game time (s)".

Panning for Gold (GMP Ticket ver.) Manual
13
SW3
Item Content 1 2 3 4
Payout
setting
****
A on
on on on
B OFF
ON ON ON
C on
off on on
D off
off on on
Item Content 5
Weight
unit
Ounce
ON
Gram
off
Item Content
6 7
Bonus
Accumulator
0
on on
1/1
OFF ON
1/2
on off
1/3
off off
** *Note:
GRADE Level1 Level2 Level 3 BONUS
(ounce/gram)
(ounce/gram)
(ounce/gram)
(ounce/gram)
A 0~10 11~19 20~27 ≥28
B 0~15 15~25 26~35 ≥36
C 0~20 21~30 31~40 ≥41
D 0~25 26~35 36~45 ≥46
****Note:
Group
Level 1
Level 2
Level 3 BONUS
(Tickets)
(tickets)
(Tickets) (Tickets)
A 1 2 5 50
B 2 5 10 100
C 5 10 20 150
D 10 20 40 200
Item Content
3 4 5 6
Fixed
ticket(s)
0 on on on on
1 OFF ON ON ON
2 on off on on
3 off off on on
4 on on off on
5 off on off on
6 on off off on
7 off off off on
8 on on on off
9 off on on off
10 on off on off
SW4
Item Content 1
Bonus
ticket
Save
ON
No save
off
Item Content
2
Fixed ticket
mode
YES
on
NO
OFF
Item Content
8
Continue
if no
ticket
YES ON
NO off

Panning for Gold (GMP Ticket ver.) Manual
14
7. ERROR MESSAGE AND RECOVERY
7.1Trouble Shootings
*Please confirm whether every connector connected tightly.
Problem Cause Countermeasures
Machine
no response
after power
on.
Power is not supplied. Please check power supply suitable for
the machine or not.
Leakage SW protection. Check leakage SW break or not, if
break you should restart.
Fuse is burnt out Replace with a proper fuse.
Power dump
Circuit protector action, power
supply SW cut off.(Note:
Circuit protector will cut off
current when abnormal
current flow.)
Please connect power SW again. If
circuit protector action again and
again, it is say that machine is
abnormal. Please connect to outlet,
Coin mech. no
response
Coin mech. failure. Replace coin mech.
Coin mech, signal cable is
loose. Check signal cable loosen or not.
No DC12V. Replace SW voltage.
IO control PCB failure. Replace IO control PCB.
Coin mech is failure. Change to a new coin mech.
Speaker no
sound.
Volume setting too low. Please set volume again.
Connector falls off. Please plug into connector firmly.
PCB failure. Replace PCB.
Speaker failure. Replace failure.
7.2 Error Code
Error display:
If the input signal is not normal when you turn on the machine, the score LED displays
SW numbers with wrong.
Error code
Please check the connection of the corresponding cables for each error.
E1: Leaking alarm; E2: Service button; E3: Test button; E4: Reset button; E5: chip loading;
E8: cannot fill up water alarm;
E51: 1P up; E52: 1P down; E53: 1P button; E54: 1P ticket assy;
E56: 2P up; E57: 2P down; E58: 2P button; E59: 2P ticket assy.;
E61: 3P up; E62: 3P down; E63: 3P button; E64: 3P ticket asyy;
E66: 4P up; E67: 4P down; E68: 4P button; E69: 4P ticket assy;
E11: 1P drop sensor; E12: 1P initial sensor; E13: 1P far sensor; E14: 1P Arm up sensor;
E15: 1P arm down sensor; E16: 1P close sensor; E17: 1P scale sensor;
E21: 2P drop sensor; E22: 2P initial sensor; E23: 2P far sensor; E24: 2P Arm up sensor;
E25: 2P arm down sensor; E26: 2P close sensor; E27: 2P scale sensor;
E31: 3P drop sensor; E32: 3P initial sensor; E33: 3P far sensor; E34: 3P Arm up sensor;
E35: 3P arm down sensor; E36: 3P close sensor; E37: 3P scale sensor;
E41: 4P drop sensor; E42: 4P initial sensor; E43: 4P far sensor; E44: 4P Arm up sensor;
E45: 4P arm down sensor; E46: 4P close sensor; E47: 4P scale sensor
HLP + Number: Out of ticket."Number" means the owe ticket amount.
HLP + P + Number: Out of prize. "Number" means the owe prize amount.

Panning for Gold (GMP Ticket ver.) Manual
15
8. MAINTENANCE, INSPECTION
8.1 Safety Check
Check the points listed before operating the machine. These checks are necessary for
safe machine operation:
1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components ensure good working
condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to be kept running
smoothly.
8.2 Handling Precautions
When installing or inspecting the machine, be very careful of the following points and
pay attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to
the cautionary matters herein stated can cause personal injury or damage to the
machine.
8.3 How to adjust the scale.
Enter into the scale adjustment mode:
Press TEST button. And press SERVICE button or RESET button. When the LED shows
"t1" on the scale, it is in scale adjustment mode.
It shows "P1~P4" on each credit display according to the position. Press confirm
button for the adjustment on each position.
CLE - clean all stuff on the scale. Then it shows "---" for 1~2s.Then it shows "Put" and
flash for 12s. During the 12s, put 50g weights on the scale. After 12s, it shows "---" for
3s. Then it shows "-E-" for 5s.
Take the 50g weights away from the scale during that 5s. The scale adjustment is
done.

Panning for Gold (GMP Ticket ver.) Manual
16
• Before servicing the machine, be sure to turn power off. Servicing without turning
the power off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be
replaced immediately.
• When or after installing the product, avoid pulling the power cord to prevent
unnecessary wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the
product was purchased from or replace locally. Continued usage of damaged
cord can cause fire, electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric
shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric
shock.
• Should a problem occur, turn off the power immediately and stop operating the
machine. Unplug the power cord of the service outlet. Operating the machine
without correcting the problem may cause a fire or injuries.
• Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
• To ensure the warning labels attached on the machine are visible and legible,
install the machine in a well-lit location, and keep the labels clean at all times.
Make sure the labels are not hidden behind other game machines.
WARNING

Panning for Gold (GMP Ticket ver.) Manual
17
9. OVERALL CONSTRUCTION
9.1 .1 General Mechanism
No. Part No. Code Name Material Qty
1 P121-014-000 29911413A011
Scale assy. Assy. 2
2 P121-134-000 20101100024
Cross recessed pan head screw Stainless steel
32
3 P121-036-000 29911413015
Pump assy. Assy. 1
4 P121-039-000 29911413040
Storage tank assy. Assy. 1
5 P121-108-000 20101000041
Cross recessed pan head screw
suite 12
6 P121-001-000 29911413A001
Cabinet assy. Assy. 1
7 P121-009-000 29911413A002
Front door assy. Assy. 2
8 P121-129-000 20101030191
Cross recessed sunk head screw
20
9 P121-011-000 29911413A006
L control panel assy. Assy. 2
10 P121-144-000 20101100094
Hexagon round head screw Stainless steel
24
11 P121-010-000 29911413A003
Middle control panel assy. Assy. 2
12 P121-013-000 29911413A007
R control panel assy. Assy. 2
13 P121-203-000 20211413001
Mechanism L cover ABS 4
14 P121-136-000 20101100028
Cross recessed pan head screw Stainless steel
32
15 P121-024-000 29911413011
Arm assy. Assy. 4

Panning for Gold (GMP Ticket ver.) Manual
18
9.1 .2 Breakwater Assy.
No. Part No. Code Name Material Qty
1 P121-327-000 20211413129
Breakwater mounted plate Stainless steel
201 1
2 P121-328-000 20611413027
Breakwater PVC 1
3 P121-148-000 20101100140
Cross recessed pan head screw
Stainless steel 4
No. Part No. Code Name Material Qty
16 P121-204-000 20611413001
Mechanism R cover ABS 4
17 P121-033-000 29911413013
Power supply SW assy. Assy. 1
18 P121-105-000 20101000034
Cross recessed pan head screw
suite 4
19 P121-424-000 25101210020
Air spring 4
20 P121-158-000 20102030034
Non-metallic hexagon lock nut Q235 16
21 P121-112-000 20101000101
Cross recessed pan head screw Q235 8
22 P121-032-000 29911413012
Windows door assy. Assy. 2
23 P121-205-000 20211413003
Meter mounted base Q235 1
24 P121-122-000 20101020037
Cross recessed pan head screw
suite Q235 7
25 P121-034-000 29911413014
PCB assy. Assy. 1
26 P121-037-000 29911413C002
Score decal assy. 1 Assy. 1
27 P121-332-000 26000040000
5mm screw washer ABS 10
28 P121-131-000 20101100018
Cross recessed sunk head screw
Stainless steel
10
29 P121-038-000 29911413C003
Score decal assy. 2 Assy. 1
30 P121-020-000 29911413A008
Marquee assy. Assy. 2
31 P121-017-000 29911413C001
Marquee base assy. Assy. 1
32 P121-107-000 20101000038
Cross recessed pan head screw
suite 4

Panning for Gold (GMP Ticket ver.) Manual
19
9.1 .3 Cabinet part
No. Part No. Code Name Material Qty
1 P121-207-000 20211413005
Cabinet body Q235 1
2 P121-236-000 20211413A004
Breakwater support bracket
Q235 2
3 P121-230-000 20211413026
Door lock card plate Color zinc 4
4 P121-105-000 20101000034
Cross recessed pan head
screw suite 90
5 P121-235-000 20211413A003
Receive coin tube Stainless steel 201
2
6 P121-002-000 29911413016
Ticket door assy. Assy. 4
7 P121-115-000 20101000154
Cross recessed sunk head
screw 12
8 P121-005-000 29911413019
Coin box assy.(tik. Ver.) Assy. 2
9 P121-434-000 25501000056
Running caster 4
10 P121-114-000 20101000147
Cross recessed pan head
screw suite 16