Universal Space TIGER KNIGHT User manual

www.universal-space.com
Operation Manual
IMPORTANT

Tiger Knight VR Manual
12/25/2017
1
CONTENT
IMPORTANT SAFETY INSTRUCTIONS ...............................................................2
1. SPECIFICATIONS.............................................................................................4
2. CONTENTS OF THE ACCESSORY KIT............................................................5
3. PART NAME.....................................................................................................6
4. SET UP & INSTALLATION ...............................................................................7
5. HOW TO PLAY............................................................................................... 16
7. TROUBLESHOOTING .................................................................................... 18
8. MAINTENANCE & INSPECTION.................................................................. 24
9. OVERALL CONSTRUCTION.......................................................................... 25
10. WIRING DIAGRAM .................................................................................... 37

Tiger Knight VR Manual
12/25/2017
2
Thank you for purchasing Tiger Knight VR. We hope you enjoy the product.
This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of
product operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and
troubleshooting guide. If the product fails to function properly, non-technical personnel
should under no circumstance attempt to service the machine. Contact your distributor or
manufacturer for help.
Before use, please read IMPORTANT SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
To ensure the safe usage of this product, carefully read and
understand these instructions before operating your game.
Save these instructions for future reference.
Use this product only as described in this manual. Other uses not recommended may
cause fire, electric shock or personal injury. Unplug the game from the outlet when not in
use, when moving from one location to another, and before cleaning/servicing.
Explanations which require special attention are indicated by signs of warning. Depending
on the potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.
NOTE: A NOTE indicates useful hints or information about product usage.
NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.
It is important to understand the meaning of the following HAZARD SIGNS before
continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.
High Temperature Hazard:
This part may cause scalding.
Do not touch. Surface may be hot.
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Tiger Knight VR Manual
12/25/2017
3
Use the following safety guidelines to help ensure your own personal safety and to help
protect your equipment and surrounding environment from potential damage.
This product is an indoor game machine. Do not install outdoors.
Avoid installing in the following places to prevent fire, electric shock, injury
and/or machine malfunctioning:
Places subject to rain/moisture, or places subject to high humidity.
Places subject to direct sunlight, or places subject to extremely hot or cold
temperatures to ensure that it is used within the specified operating range.
Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire.
On unstable or sloped surfaces. The machine may topple or cause unforeseen
accidents.
Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures.
IMPORTANT NOTE:
ALL REPAIRS MUST BE DONE TO ORIGINAL MANUFACTURER SPECIFICATIONS.
FAILURE TO DO SO VOID ALL WARRANTIES AND OPERATOR ASSUMES ALL
RISKS.
Note: The contents of this manual may be updated without notice.

Tiger Knight VR Manual
12/25/2017
4
1. SPECIFICATIONS
Rated power supply: AC110V 50/60Hz; AC220V 50/60Hz
Min. Power consumption: 250W
Max. Power consumption: 430W
Dimension: W 52.04×D78.3 ×H 97.12 in
Part No: T137
Model No: V-005
NOTICE: After turning off the game, please wait at least 1 minute
before restarting again.
Note: Game specifications are subject to change without notice.

Tiger Knight VR Manual
12/25/2017
5
2. CONTENTS OF THE ACCESSORY KIT
Open the package and make sure all the items are included:
1. Following accessories
No. Part No. Code Name Picture Qty
1 T137-801-000 41440000235 Manual 1
2 T137-802-000 25300171002 Key 2
3 T137-803-000 25300172002 Key 2
4 T137-528-000 23301000001 Power cord 1
5 T137-804-000 23302000012 Network cable 1
6 T137-526-000 21107120003 Keyboard & Mouse 1
NOTE: Part models are subject to change without notice.

Tiger Knight VR Manual
12/25/2017
6
3. PART NAME
Key Components
Mar
q
uee Ass
y
.
Display
Play field
HTC Assy.
Stop button

Tiger Knight VR Manual
12/25/2017
7
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.
Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid
Place the unit on a dry level surface
Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE
Be careful not to damage the machine during transport.
Always unplug the game before moving.
Keep the machine in upright position during transport.
For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the
game
. If the game is installed on an unsuitable floor, it could cause game malfunction.
To secure the game, adjust the Leveler down until it touches the floor, lifting the casters off
the ground by 0.2 in. Repeat the same for all levelers.
Leveler Caster
Move F
i
Caster Leveler
About 0.2 in
Move Fix
NOTICE
Make sure the machine is level.
We do not recommend using power tools as they may cause damage.
NOTICE

Tiger Knight VR Manual
12/25/2017
8
4.3 Play Zone
This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:
Service area: 20 in
Service area
Play area

Tiger Knight VR Manual
12/25/2017
9
4.4 Machine Installation
4.4.1 Cabinet Installation
Before processing with assembly assure you have the following tools.
No. Part No. Code No. Name Picture Qty
1 T137-104-000 20101010035 Cross recessed pan head
screw set
4
No. Name Picture
Use for
1 Phillips screwdriver Step 1-2-4-5
2 Allen hexagon wrenches Step 6
Display part
Horse part
Step 1 Place two parts as picture shown and connect all the plugs and make sure them in the
black pipe. Then, attach the cross recessed pan head screw set as picture shown.

Tiger Knight VR Manual
12/25/2017
10
No. Part No. Code No. Name Picture Qty
1 T137-141-000 20104013004 Cross recessed hexagon screw
kit
6
No. Part No. Code No. Name Picture Qty
1 T137-105-000 20104010005 Cross recessed hexagon screw
kit
4
Step 2 Fix side bars with cross recessed hexagon screw kit.
Step 3 Loosen the screws to remove two back plates.
At the back of
the cabinet
Remove this
black plate.
Remove this
black plate.

Tiger Knight VR Manual
12/25/2017
11
Step 4 Install background bracket with cross recessed hexagon screw kit.
Step 5 Open back door of the machine, guide the wiring of the HTC headset as red line,
plug in three plugs in red circle. Then, reassemble two back plates.
Back of the machine
Three Plugs

Tiger Knight VR Manual
12/25/2017
12
No. Part No. Code No. Name Picture Qty
1 T137-105-000 20104010005 Cross recessed hexagon screw
kit
4
2 T137-142-000 20101030006 Hexagon flat round head
screws
4
3 T137-133-000 20113000055 C washer 4
Step 6 Install the POP mounting bracket with cross recessed hexagon screw kit and install
the POP plate with Hexagon flat round head screws and C washers.
Please pay attention for the metal when
installing the POP.
Cross recessed hexagon
screw kit
Hexagon flat round
head screws & C
washer

Tiger Knight VR Manual
12/25/2017
13
Step 8 Plug in the network cable at the outlet and connect it to the Internet.
No. Part No. Code No. Name Picture Qty
1 T137-102-000 20101010140 Cross recessed pan head
screw
4
2 T137-142-000 20101030006 Hexagon flat round head
screws
4
3 T137-133-000 20113000055 C washer
No Part No. Code No. Name Picture QTY
1 T137-804-000 23302000012 Network cable
1
Step 7 Install the PVC plate brackets and install the front PVC.
Cross recessed pan
head screw
Hexagon flat round head screws & C washer

Tiger Knight VR Manual
12/25/2017
14
9-1 Install the base stations
Step 9 Install the base stations and set the channel.

Tiger Knight VR Manual
12/25/2017
15
9-2 Setting the channel
Signal light Channel button

Tiger Knight VR Manual
12/25/2017
16
5. HOW TO PLAY
Look at the front and pull the right trigger. Pull the right trigger and shoot.
1. Put the right controller on the top of
the left controller.
2. Pull the right trigger.
3. Pull.
4. Release the right trigger.

Tiger Knight VR Manual
12/25/2017
17
Shake the left controller to speed up.

Tiger Knight VR Manual
12/25/2017
18
7. TROUBLESHOOTING
7.1 Common Problem
Please confirm that all connectors fit tightly.
Symptom Possible Cause Recommended action
Game will not
start
Frame assembly connector is
loose. Check connector.
Frame assembly fault Contact with UNIS Service.
Power off Circuit protector make power SW
in off state.
Turn on power SW again. If appeared
again and again, machine has
anomaly. Please contact with UNIS
Service.
Card reader not
working
The connector is loose. Check connector.
Card reader fault. Check with card reader manufacturer.
No ticket
dispensing
Out of ticket. Add ticket and press reset button
Ticket jamming. Remove the jammed tickets and press
reset button.
The connector is loose. Plug the connector tightly.
No sound
Low volume Raise the volume.
Connector loose. Check connector.
Speaker fault. Check speaker.
POT installation error. Install POT correctly.
POT fault. Change POT.
Audio cable problem. Reconnect the audio cable or change
it.
PC crash. Restart or system recovery.
Driver problem Restart the audio driver.
Display black
screen
Check connectors. Plug in connector tightly
Display fault. Utilize another source such as a PC to
verity if the display is operational.
RAM is loose. Remove and reinsert RAM.
Display blue
screen
PC power cord is loose Check PC power cord whether is loose.
VGA signal cable is loose. Check VGA cable
PC video card is loose. Reseat video card.
“0X000000A” code appears.
Conflict between computer drive
and software.
Contact service
Note: After replacing component from pc (except for RAM), and replacing monitor, the
game should be recovered again with the memory stick attached to the machine.

Tiger Knight VR Manual
12/25/2017
19