Wren Kitchens 2070 User manual

TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
2070 - 2250 x600
1 Door 50/50 Door 70/30 Door

Page 1
TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
Panel A
x1 End Panel
Left Hand
Panel B
x1 End Panel
Right Hand
Panel C
x1 Back Panel
Left Hand
Panel D
x1 Back Panel
Right Hand
Panel sE
x1 Top Panel
Panel sM
x4 Fixed Shelf
Frontals
50/50 or 1Dr or 70/30
(Packed Separately)
Plinth
x1
(F) x40
Wooden Dowel
(H) x20
Cam lock
(K) x36
45mm Screws
(L) x12
15mm Screws
NOT to be
used with
CAM DOWEL
& CAM LOCK
REQUIRED TOOLS
L Bracket (LGE)
x4 Fixing Plate (U)
x4
Hinge Mounting Plate
Inc Screws
Hinge
Inc Screws
70/30 OPTION
1Dr OPTION
50/50 OPTION
(M) x8
Cover Cap
(Per Colour)
(W) x20
Cam Dowel
BEFORE YOU START
INSTALLATION
SHOULD BE PERFORMED
BY A COMPETENT PERSON
ONLY.
THIS PRODUCT COULD
BE DANGEROUS IF
INCORRECTLY INSTALLED

Page 2
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
FFW
W
Seat (W)
cam dowel
into hole as
shown.
Step 2.
Seat dowel (F) into
holes in end panel (A)
as shown.
Step 1.
Seat cam dowel (W) into
holes in end panel (A) as
shown.
Step 4.
Join panels (sE) and (sM) to end
panel (A).
Insert cam locks (H).
Do NOT tighten until Step 7.
Do not use power tools with
Cam dowel (W) or cam lock (H)
sM
sM
A
View from underside View from underside
A
H
H
A
LH
From Top
From Bottom
DOWEL (F)
& CAM DOWEL (W)
LOCATION DETAIL
W
F
W
sM
sM
sM
sM
sE
A
LH
Step 3.
Attach panels (sM) and (sE) to end panel (A),
using cam dowel (W) (in blue) and also using
dowels (F) (in orange) in positions as shown.

Page 3
TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
Step 5.
Seat 10x dowels (F) into holes in
both panels (sM) and (sE)
as shown.
Step 8.
Using 15 x 45mm screws (K)
secure back panel (C) to panels
(sM) and (sE).
Step 9.
Secure back panel (C) to end
panel (A) at the bottom.
Use 4 x 15mm screws (L)
to 1 x L bracket LGE as
shown.
Step 6.
Slide back panel (C) into groove of end
panel (A). Also insert dowels (F) (in orange)
from panels (sM) and (sE) into the required
holes in back panel (C).
Once back panel (C) is in position, ensure
the panel is ush & square with bottom of
end panel (A).
LL
LL
sE
F
F
F
F
F
FF
FF
F
sM sM
sM
sM
A
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
C
LH
A
sM
A
View from underside
H
H
Step 7.
Hand tighten all cam
locks (H), this will expand
cam dowels (W).

Page 4
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
Step 10.
Seat dowel (F) into holes in
end panel (B) as shown.
Step 11
Seat cam dowel (W) into
holes in end panel (B) as
shown.
Seat (W)
cam dowel
into hole as
shown.
Do not use power tools with
cam dowel (W) or cam lock (H)
Step 12.
Attach end panel (B) to panels (sM) and (sE) using cam dowel (W) (in
blue) and also using dowels (F) (in orange) in positions as shown.
FF
RIGHT HAND
B
WW
From Bottom
From Top
DOWEL (F)
& CAM DOWEL (W)
LOCATION DETAIL
Step 13.
Join panels (sE) and (sM) to
end panel (A).
Insert cam locks (H).
Do NOT tighten until Step 18.
F
WsM
sM
View from underside View from underside
BBH
sM sM sM sM sE
C
B
RH
LH
A
RH

Page 5
TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
Step 14.
Seat 10x dowels (F) into holes in
both panels (sM) and (sE)
as shown.
Step 15.
Secure back panel (D) to
panels (sE) and (sM) and back
panel (C). Use 20 x 45mm
screws (K) as shown.
Step 16.
Ensure to insert the lower part of back panel
(D) into end panel (B) groove.
sM sM sM sM sE
F
A
B
RH
LH
C
K
D
C
B
RH
LH
B
D

Page 6
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
Step 17.
Secure back panel (D) to end panel (B) at the
bottom. Use 4 x15mm screws (L) to 1 x L bracket
LGE as shown.
Step 18.
Hand tighten all cam locks (H),
this will expand cam dowels (W)
and tighten the unit together.
D
M
View from underside
BH
Step 19.
Secure tower to the wall using
L brackets LGE.
Use 2 x 15mm screws (L) to
secure each of the
L brackets LGE to the units
at either side. Then screw
through into the wall as
shown.
Screws for xing to walls
are not provided as these
vary depending on your wall
material and construction.
Ensure appropriate xings for
wall constructions are used.
B
B
BB
L
L

Page 7
TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
2070
70/30
HINGE
POSITION
2070
50/50 & 1 DOOR
HINGE
POSITION
A or BA or B
1976mm 1976mm
1236mm
1016mm
996mm
1486mm
776mm
276mm 276mm
1944mm 1944mm
1204mm
984mm
964mm
1454mm
744mm
244mm 244mm
Step 20.
Attach hinge plates onto end panel (A) or (B) to suit as shown using 2 screws already positioned within the hinge plate.
Hinge side or sides to be mounted in accordance to Customer Specic Kitchen Plan.
FrontFront
From TopFrom Top
From BottomFrom Bottom
50/50
70/30 1 Dr
Door
INSIDE
FACE
INSIDE
FACE

Page 8
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
2250
70/30
HINGE
POSITION
2250
50/50
HINGE
POSITION
A or BA or B
2156mm 2156mm
1176mm
1666mm
996mm
1576mm
776mm
276mm 276mm
956mm
2124mm 2124mm
1144mm
1634mm
964mm
1544mm
744mm
244mm 244mm
924mm
Step 20.
Attach hinge plates onto end panel (A) or (B) to suit as shown using 2 screws already positioned within the hinge plate.
Hinge side or sides to be mounted in accordance to Customer Specic Kitchen Plan.
FrontFront
From TopFrom Top
From BottomFrom Bottom
50/50
70/30
INSIDE
FACE
INSIDE
FACE

Page 9
TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
2250
1 Door
HINGE
POSITION
2156mm
1351.5mm
1080.5mm
1319.5mm
1048.5mm
276mm
2124mm
244mm
Front
From Top
From Bottom
1 Dr
Door
A or B
INSIDE
FACE
Step 20.
Attach hinge plates onto end panel (A) or (B) to suit as shown using 2 screws already positioned within the hinge plate.
Hinge side or sides to be mounted in accordance to Customer Specic Kitchen Plan.

Page 10
For Internal Use: FI.WR.INS.014_WKIN0062_Walkin_Tower_Guide_Rev13
U
U
U
UU
U
1DOOR OPTION50/50 & 70/30
OPTIONS
Step 2.
Align doors & frontal plinth to join together
using xing plates (U) to the back of both
frontals. Ensure a 4mm gap is maintained
between each frontal once xed together.
Screw in place using 4 x 15mm screws (L)
per xing plate (U).
Fixing plate
Step 3.
Secure hinges by tightening 2 x screws with
hinge dowels attached. These are already
positioned within the hinges.
Door Frontal Fixing (Where Applicable)
Innity +
Doors Supplied in accordance to
customer specic kitchen plan
Hinge dowels
Step 4.
Attach the door to unit, clip hinge onto
hinge plate and click to secure.
Step 1.
Insert hinge into hinge holes provided, in
accordance with customers plan.
Hinge cover caps
Step 5.
Adjust hinge to suit. As shown below.
Hinge plates
View from Inside of unit
To adjust hinge using
a screw driver, tighten
or loosen as required at
points 1 & 2.
Point 1- In - Out
Point 2- Left - Right
1
2
FRONTAL
HINGE
ADJUSTMENT
To release door, pull
catch as shown, to
release hinge from
the hinge plate.
Step 6.
Fit cover caps to hinge.
Adjust soft close to suit.
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
To move the
hinge up/down,
loosen screws
A + B,
manoeuvre
the door, then
re-tighten the
screws
A
B

Page 11
TOWER UNIT
2070 & 2250 Walk In Tower Assembly Guide
Door Frontal Fixing (Where Applicable)
Innity
Doors supplied in accordance to
customer specic kitchen plan
Step 4.
Adjust hinge to suit. As shown below.
Step 5.
Fit cover caps to hinge.
Adjust soft close to suit.
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
View from Inside of Unit
To adjust hinge using
a screw driver, tighten
or loosen as required at
points 1 & 2.
Point 1- In - Out
Point 2- Left - Right
12
FRONTAL
HINGE
ADJUSTMENT
To release door
Pull catch as shown,
to release hinge
from the hinge
plate.
Hinge cover caps
Hinge Plates
To move the
hinge up/down,
loosen screws
A + B,
Manoeuvre
the door, then
re-tighten the
screws
A
B
Hinge dowels
U
U
U
UU
U
50/50 & 70/30
OPTIONS
Step 2.
Align doors & frontal plinth to join together
using xing plates (U) to the back of both
frontals. Ensure a 4mm gap is maintained
between each frontal once xed together.
Screw in place using 4 x 15mm screws (L)
per xing plate (U).
Fixing plate
Step 3.
Secure hinges by tightening 2 x screws with
hinge dowels attached. These are already
positioned within the hinges.
Step 4.
Attach the door to unit, clip hinge onto
hinge plate and click to secure.
Step 1.
Insert hinge into hinge holes provided, in
accordance with customers plan.
1DOOR OPTION