XMark Fitness XM-4441 User manual

Owner’s Manual
XM-4441
Read all precautions and instructions in this manual before using this equipment.
Adjustable Speed
Bag Platform
9/20

2
Table of Contents
3
4-5
6
7
Before You Start
Assembly
Exploded View
Parts List

Before You Start
3
THANK YOU for making this unit a part of your exercise program.
XMark assures the very best in value, appearance, durability and
biomechanics.
•This unit should only be used on a level surface and is intended for indoor use
only.
•Always examine your unit before using to ensure all parts are in working order.
•Do not leave children unsupervised near or on the unit.
This manual will guide you through the assembly process. If at any time you are having
trouble with the assembly or use of this product, please contact our Customer Service
department. We have trained service technicians on site to assist you.
Visit www.xmarkfitness.com for warranty information
SAFETY INFORMATION WARNING
Before using this unit or starting any exercise program, consult your physician. This is
especially important for persons over the age of 35 and/or persons with pre-existing
health problems. XMark assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s
Manual and are familiar with safety information and precautions.
SAFETY PRECAUTIONS

Assembly
1
2
3
1.
2.
3.
Attach Mounting Brackets (2) to Main Frame (1)
with:
Attach Speed Bag Platform (3) to Main Frame
(1) with:
4
1
2
2
8
8
8
2
5
5
5
5
6
6
6
6
12
12
NOTE: Hand tighten bolts and locknuts until machine is fully assembled.
Lock nuts may require additional force to tighten completely.
3
11 11 11
1
9
999
10 10
229
9
9
9
7
7
7
7
Attach the Mounting Brackets (2) to the Wooden
Studs with:
NOTE: The swivel has been attached using a
power tool. If you wish to remove the swivel a
power tool is needed. Not doing so could
damage the hardware or board.
•4 x Carriage Bolts (12)
•4 x Plastic Washers (8),
•4 x Big M10 Washers (5)
•4 x Knob Nuts (6).
•4 x Socket Head Cap Screws (11)
•4 x M10 Washers (9)
•4 x M10 Locknuts (10)
•4 x Hex Screws (7)
•4 x M10 Washers (9)
Wooden studs are boards that function as
framing elements in your home, supporting
the walls. They're spaced at 16" on-center
(measured from center to center) along the
wall and run between the floor and ceiling. a
stud finder locates studs quickly and
accurately.

Assembly
4
4. Make sure that all parts are properly
tightened before you use the Adjustable
Speed Bag Platform.
Congratulations!! You have completed
assembly of your XM-4441!
5

Exploded View
6
1
2
2
3
4
9
9
9
9
999
9
6
6
6
6
7
7
7
7
8
8
8
5
5
5
10
10
10
11
11
11 11
12
12
13 13

XM-4441
Part List
7
Key No. Description Qty
1 Main Frame 1
2 Mounting Bracket 2
3 Speed Bag Platform 1
4 Flange 1
5 Big M10 Washer 4
6 Knob Nut 4
7 ST9.5 x 75mm Hex Screw 4
8 Plastic Washer 4
9 M10 Washer 8
10 M10 Locknut 4
11 Socket Head Cap Screw M10 x 45mm 4
12 Carriage Bolt M10 x 30mm 4
13 ST 4.8 x 35mm Screw 4

Customer Service: [email protected]