Yealink RingCentral MeetingBar A30 User manual

English | 简体中文
Quick Start Guide (V1.0)
All-in-one Video Collaboration Bar
MeetingBar A30
RingCentral Edition

1
Note:
• We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party
accessories may result in reduced performance.
• Use the Yealink original adapter (48V/0.7A) to charge the endpoint only. The use of the third-party adapter
may cause the damage to the endpoint.
• Put the magnet rings on the HDMI cable to prevent electromagnetic interference.
Package Contents
MeetingBar A30 3m Ethernet
Cable
1.8m HDMI Cable×2
(for the display device)
Cable Tie×5 Power Adapter
×4
×2
×2
Mounting Bracket
and Accessories Silicone Pad×2 Quick Start Guide
• Standard accessories
• Optional accessories
CTP18
VCH51
Touch Panel Package
VCH51 Sharing Kit (*Coming soon)
WPP20
Wireless Presentation Pod (*Coming soon)

2
Endpoint Installation
Use the bracket to mount your endpoint on a wall. The mounting height affects
your camera view. The recommended height is 1.1m above the ground.
Wall Mounting
Step1: Assemble the mounting bracket
• Mount on a Wall
A30 position
TV
TV
H>120cm
H<120cm
10cm
Remove the Protective Shell

3
4
5
NN
3
• Using Yealink TV Mount Bracket
Note: The TV stand should be purchased separately.
Step2: Mount the A30 to the wall
T4×30 screws
Hole depth: 30mm
Hole diameter: 6mm

4
Adjusting the Camera Tilt
15°
15°
1
2
• Put on a desk
TV
• Put on a TV stand cart platform
TV TV
Silicone Pad

5
CTP18 Connection
Reset
MAC
SN
3m Ethernet Cable
7.5m Ethernet Cable
Pair the CTP18 with A30-RingCentral:
1. If you get the bundle devices, the pairing will be automatically done by the system.
You need to enter the APP pairing code and sign in to the RingCentral account on
CTP18 to complete the pairing and start the meeting.
2. If you get a single new CTP18, enter the IP address of the A30 in CTP18 to make
the system pre-pairing, enter the APP pairing code and sign to the RingCentral ac-
count on CTP18 to complete the pairing and start the meeting.
Endpoint Connections
Note:
• If you only need to use one display, please connect to HDMI 1 port.
• If you connect a touch display device, you can operate the A30 by touch control.
• If you connect a non-touch display device, you can use the mouse or CTP18.
PoE
Display
Power Adapter
3m Ethernet Cable 7.5m Ethernet Cable
Display
1.8m HDMI Cable
PoE
Make sure that CTP18 and the
MeetingBar A30 are in the same
LAN.
VCH51 (for HDMI ingest
function *coming soon)

6
说明：
• 此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰采取切实可
行的措施。
• 我们推荐使用由亿联提供或经亿联认可的配件和线缆，使用未经认可的第三方配件和线缆可能会导致性能的下降。
• 使用 HDMI 线前，请套上磁环用于抗电磁干扰。
包装清单
×4
×2
×2
MeetingBarA30 3 米网线 1.8 米HDMI 线 x2
（用于接显示设备）
束线带 ×5 电源适配器 支架配件
（用于安装主机） 硅胶垫 x2 快速入门指南
•标准配件
•可选配件
CTP18
VCH51
触控平板
有线投屏套件
(* 即将推出 )
WPP20
无线传屏器
(* 即将推出 )

7
墙装
使用支架将终端安装在墙上。安装高度会影响摄像机的视野，建议终端安装的
高度为离地面 1.1m。
步骤 1：安装支架
安装终端
•墙装
A30 位置
TV
TV
H>120cm
H<120cm
10cm
拆除镜头保护壳

8
•使用亿联专用电视挂架
说明：电视架需单独购买。
4
5
NN
3
打孔直径：6mm
打孔深度：30mm
螺丝规格：T4×30
步骤 2：墙装
简
体
中
文

9
调整倾斜角度
15°
15°
1
2
•置于桌面
TV
•置于电视推车
TV TV
硅胶垫
简
体
中
文