YewdaleDefiant R20M User manual

Fitting Instructions
for YewdaleDefiant® roller blinds
(R20M)
yewdale.co.uk
Fitting Instructions
YewdaleDefiant®roller blinds
(R20M)
Part no: 939

YewdaleDefiant® fitting instructions Part no: 9392
Fitting Instructions
YewdaleDefiant®roller blinds (R20M)
R20M Electric 24v DC:
938024 40mm Barrel
938027 45mm Barrel
980002
24v DC Motor
980013
40mm Adaptor set
980009
45mm Adaptor set
926325W
Back bar top fix bracket
933026W
Control bracket
40mm (back bar)
933036W
Control bracket
45mm (back bar)
933010W
Back bar screw
926325W
Back bar top fix bracket
938031W
Aluminium back bar
OPTIONAL
938120W
Bottom bar plastic
938170W
Bottom bar end cap
918003S
Wire
918011
Wire clamp
918008
Side guiding bezel
OPTIONAL
938311W/B/S Tear drop bottom bar
938312W/B/S Tear drop endcap
938313W/B/S Side guiding adapter
980026
40mm Universal end set
980033
45mm Universal end set
933029W
40mm Bracket cover
933039W
45mm Bracket cover
OPTIONAL
938311W/B/S
Tear drop bottom bar
938312W/B/S endcap
938314W
Lug
6200W
Aluminium
Channel

Call: [phone] Fax: [phone] Email: [email protected] Visit: www.yewdale.co.uk 3
R20M Electric 24v DC:
1.The standard universal metal brackets supplied with the blind may be top,
face or side-fixed. Fix the brackets in place using the appropriate screws/
plugs.
2. Check that the blind fits correctly. The pin-end is sprung for easy fitting, but
the pin should be depressed once in place. The fabric should roll o the back
of the barrel, unless the blind was ordered reverse-roll.
3.Fix the control-end bracket using appropriate screws/plugs.
4. Locate the blind in the control-end bracket, and mark the position of the pin-
end bracket.
5. Remove the blind and fix the pin-end bracket using appropriate screws/
plugs.
NB. To operate correctly, the blind MUST be fixed level.
6. Insert the pin in the pin-end of blind into the bracket. Press the blind against
the bracket to depress the sprung pin, and insert the lug on the control-end
into its bracket until it drops into place.
7. Ensure the relevant child safety device is used to comply with BS
EN13120:2009+A1:2014, BS EN16433:2014 and BS EN16434:2014.
8. For programming instructions, please refer to enclosed leaflet.
NB. Large blinds are heavy and it is important that the correct fixings are used.
If unsure, seek expert advice.

Yewdale, Enterprise Way,
Wickford, Essex SS11 8DH
Call [phone]
Fax [phone]
Email [email protected]
Visit yewdale.co.uk
For more information on all
Yewdale products, please call
the sales department.