YewdaleDefiant R20B User manual

Fitting Instructions
for YewdaleDefiant® roller blinds
(R20B)
yewdale.co.uk
Fitting Instructions
YewdaleDefiant®roller blinds
(R20B)
Part no: 938

YewdaleDefiant® fitting instructions Part no: 9382
R20B Low Voltage Battery 7.4v DC - Radio control battery motor
Fitting Instructions
YewdaleDefiant®roller blinds (R20B)
938024 Barrel 40mm
938027 Barrel 45mm
980003
7.4v DC motor
980026
40mm Universal end set
980033
45mm Universal end set
980013
40mm Adaptor set
980009
45mm Adaptor set
926325W
Back bar top fix bracket
933026W
Control bracket
40mm (back bar)
933036W
Control bracket
45mm (back bar)
933010W
Back bar screw
926325W
Back bar top fix bracket
938031W
Aluminium back bar
933029W
40mm Bracket cover
933039W
45mm Bracket cover
918003S
Wire
918011
Wire clamp
918008
Side guiding bezel
OPTIONAL
938311W/B/S
Tear drop bottom bar
938312W/B/S
Tear drop endcap
938313W/B/S
Side guiding adapter
980011
Solar Panel
918010
Charger
OPTIONAL
938120W
Bottom bar plastic
938170W
Bottom bar end cap
OPTIONAL

Call: [phone] Fax: [phone] Email: [email protected] Visit: www.yewdale.co.uk 3
R20B Low Voltage Battery 7.4v DC - Radio control battery motor
1.The standard universal metal brackets supplied with the blind may be top,
face or side-fixed. Fix brackets in place using the appropriate screws/plugs.
2.Check that the blind fits correctly. The pin-end is sprung for easy fitting, but
the pin should be depressed once in place. The fabric should roll o the back
of the barrel, unless ordered as reverse-roll.
3.Fix the control-end bracket using appropriate screws/plugs.
4. Locate the blind into the control-end bracket, and mark the position of pin-
end bracket.
5. Remove the blind and fix the pin-end bracket using appropriate screws/
plugs.
NB. To operate correctly, the blind MUST be fixed level.
6. Insert the pin-end of the blind into the bracket. Press the blind against the
bracket to depress the sprung pin, and insert the lug on the control-end into
its bracket until it drops into place.
7. For programming instructions, please refer to enclosed leaflet (sheet 1023).
NB. Large blinds are heavy and it is important that the correct fixings are used.
If unsure, seek expert advice.

Yewdale, Enterprise Way,
Wickford, Essex SS11 8DH
Call [phone]
Fax [phone]
Email [email protected]
Visit yewdale.co.uk
For more information on all
Yewdale products, please call
the sales department.