AEG VSS 260 User manual

VSS 260, VSSE 260
824462
@ Gebrauchsanweisung
Bitte lesen und aufbewahren.
($3 Instructions for use
Please read and save these instructions.
a Instructions dyutilisation
Pri&e de lire et de conserver.
a lstruzioni d’uso
Si prega di leggere le istruzioni e di
conservarle.
@ Gebruiksaanwijzing
Lees en let goed op deze adviezen.
@I Bruksanvisning
Var god I& och tag tillvara dessa instruktioner.
@ KayttSohje
LueC ja s3ilytij
@ Brugsanvisning
Veer venlig at kese og opbevare.

12 3
4
10
98
7
6 5

0
GB
Congratulations
on your choice of a new AEG
power tool. It is a quality product
with over 90 years of user
oriented tool development
and production skill.
We recommend that you
carefully read these instructions
for use in order to find
complete satisfaction with
your power tool.
Thank you for choosing AEG.
AEG Electric Power Tools
1 Illustration
1 Setting wheel for oscillation frequency
(VSSE 260)
2 On-off switch
3 Locking button
4 Dust bag
5 Clamping springs
6 Suction nozzle
7 Sandpaper clamping device
8 Clamping lever
9 Perforated base plate
10 Sandpaper clamping device
2 Technical Data
Power input . . . . . . . . . . . . . . . . 260 W
No load oscillation frequency
VSS 260 . _ . . _ . . . _ . . . . . 22.000 min-I
VSSE 260 _ _ . . . . . . 13.000-22.000 min-1
Diam. of oscillation circle . 2,5 mm
Dimensions of grinding plate 227 x 105 mm
Weight . . . . . . . . . . . _ . . 2,O kg
3 Power Supply
Connect only to a single-phase AC current supply
and only to the mains voltage specified on the
rating plate. Connection to sockets without earth
protection is possible as the appliance features
protective insulation to DIN 57 7401 VDE 0740 and
CEE 20. Radio suppression complies with the
European standard EN 55014.
When fitting the plug, make sure that the brown
(live) wire of this appliance is connected to the plug
terminal marked L or coloured red and the blue
(neutral) wire of this appliance is connected to the
plug terminal marked N or coloured black. Under no
circumstances must the wires of this appliance be
connected to the earth terminal of the plug marked
either E, with the earth symbol or coloured green or
green/yellow.
4 Safety Instructions
A Please note safety instructions on sheet 333 024!
0 Always disconnect the plug from the mains
supply before carrying out any work on the
machine.
0 Check the plug and mains lead for possible
damage. Damaged or faulty parts should be
repaired by experts only.
0 Keep mains lead clear from the working range of
the machine.
0 Only plug in when machine is switched off.
0 Do not pierce the motor housing as this could
damage the double insulation (use adhesives).
0 These orbital sanders are only suitable for dry
sanding.
3
0 Tool repairing by expert only.
5 On-off Control
lntermittant use
Switching on: Press on-off control (2)
Switching off: Release on-off control
(2)
Continuous use
Switching on: Press the on/off control (2) and then
the locking button (3), after that release on-off
control (2).
Switching off: Press the on/off control (2) and then
release.
6 Electronic VSSE 260
Through this electronic the oscillations can be
controlled and suited to the use of various
materials.
Speed selection with setting wheel (1)
direction + : to increase speed
direction - : to reduce speed
7 Changing the sand paper
Raise both clamping levers (8) outwards and swing
downwards. Place the end of the sandpaper
approx. 1 cm under the lower clamping (7), swing
back clamping lever and engage. Place the sand
paper over the sanding cushion (9) and then tighten
under the upper clamp (10).
For maximum dust extraction ensure that the
perforations of base plate and sandpaper
correspond.
VSS 260, VSSE 260

8 Protection of Environment 10 Service
Through the integrated suction operation the dust is
extracted through the perforated base plate directly Use only AEG accessories and spare parts. Should
into the dust bag (4). components need to be exchanged which have not
When putting the dust bag onto the suction been described, please contact one of our AEG
nozzle (6) the groove of the dust bag (4) must service agents (see our list of Guarantee/Service
correspond with the guide slots of the suction Addresses).
sleeve.
In case of decreasing suction power the dust bag
(4) must be emptied. For this take off the dust bag
(4) by pressing the clamping connection (5) firmly
together.
For the extraction of a great amount of dust a
11 Modifications
Text,. diagrams and data are correct at the time of
printtng. In the interest of continuous improvement
suction hose can be connected to the suction
nozzle.
of our products, technical specifications are subject
to alteration without prior notice.
We recommend the AEG suction hose which is
suitable for AEG wet and dry vacuum cleaners as
well as domestic vacuum cleaners.
9 Accessories
Paper filters are available as an accessory. When
putting on the filter let the cardboard engage in the
plastic connection.
Put the dust bag over the paper filter. By using this
double dust protection all of the dust is kept inside.
Further accessories with part numbers are shown in
our catalogues.
Tips on selecting the emery of sandpaper
Rough sanding of hard wood,
Classification
coarse
Grit
50,60
Rough sanding of soft wood,
finish sanding of planed or
machined surfaces
medium
60,80,100
Finish sanding of hard and soft wood,
finish sanding/polishing of fillers
and veneers to bring out the wood grain
fine
120,150,180,240
VSS 260, VSSE 260