Amazone Pantera 4502 User manual

Operating Manual
az
Pantera 4502
with Comfort Package 1
Self-propelled field sprayer
(Euro 3A / Euro 4 Emission Standard)
MG5577
BAG0166.5
12.18
Printed in Germany
Please read this operating
manual before commissioning.
Keep it in a safe place
for future use.
en

2
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
Leipzig-Plagwitz 1872.

Identification data
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
3
Identification data
Please insert the identification data of the machine. The identification
data are arranged on the type plate.
Machine ID No.:
(10-digit)
Type: Pantera 4502
Year of manufacture:
Basic weight (kg):
Permissible total weight (kg):
Maximum load (kg):
Engine number
Manufacturer's address
AMAZONEN-WERKE
H. DREYER GmbH & Co. KG
Postfach 51
D-49202
Tel.:
E-mail:
Hasbergen, Germany
+ 49 (0) 5405 50 1-0
[e-mail]
Spare part orders
Spare parts lists are freely accessible in the spare parts portal at
www.amazone.de.
Please send orders to your AMAZONE dealer.
Formalities of the operating manual
Document number:
MG5577
Compilation date:
12.18

Copyright AMAZONEN-WERKE H. DREYER GmbH & Co. KG, 2018
All rights reserved.
Reprinting, even of sections, permitted only with the approval of
AMAZONEN-WERKE H. DREYER GmbH & Co. KG.

Foreword
4
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
Foreword
Dear Customer,
You have chosen one of the quality products from the wide product
range of AMAZONEN-WERKE, H. DREYER GmbH & Co. KG. We
thank you for your confidence in our products.
On receiving the machine, check to see if it has been damaged during
transport or if parts are missing. Using the delivery note, check that
the machine has been delivered in full, including any special equip-
ment ordered. Damage can only be rectified if problems are signalled
immediately.
Before commissioning, read and understand this operating manual,
and particularly the safety information. Only after careful reading will
you be able to benefit from the full scope of your newly purchased
machine.
Please ensure that all the machine operators have read this operating
manual before the machine is commissioned.
Should you have any questions or problems, please consult this op-
erating manual or contact your local service partner.
Regular maintenance and timely replacement of worn or damaged
parts increases the lifespan of your machine.
User evaluation
Dear Reader,
We update our operating manuals regularly. Your suggestions for
improvement help us to create ever more user-friendly manuals.
AMAZONEN-WERKE
H. DREYER GmbH & Co. KG
Postfach 51
D-49202
Tel.:
E-mail:
Hasbergen, Germany
+ 49 (0) 5405 50 1-0
[e-mail]

Table of Contents
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
5
1User Information........................................................................................10
1.1 Purpose of the document.......................................................................................................10
1.2 Locations in the operating manual.........................................................................................10
1.3 Diagrams................................................................................................................................10
2General Safety Instructions ......................................................................11
2.1 Obligations and liability..........................................................................................................11
2.2 Representation of safety symbols..........................................................................................13
2.3 Organisational measures.......................................................................................................14
2.4 Safety and protection equipment...........................................................................................14
2.5 Informal safety measures.......................................................................................................14
2.6 User training...........................................................................................................................15
2.7 Safety measures in normal operation....................................................................................16
2.8 Danger from residual energy .................................................................................................16
2.9 Maintenance and repair work, fault elimination .....................................................................16
2.10 Design changes.....................................................................................................................16
2.10.1 Spare and wear parts and aids..............................................................................................17
2.11 Cleaning and disposal............................................................................................................17
2.12 User workstation....................................................................................................................17
2.13 Warning symbols and other signs on the machine................................................................18
2.13.1 Positions of warning symbols and other labels......................................................................19
2.14 Potential risks from not observing the safety instructions......................................................26
2.15 Safety-conscious working......................................................................................................26
2.16 Safety information for users...................................................................................................27
2.16.1 General safety and accident prevention information.............................................................27
2.16.2 Hydraulic system....................................................................................................................29
2.16.3 Electrical system....................................................................................................................30
2.16.4 Brake system .........................................................................................................................31
2.16.5 Tyres......................................................................................................................................31
2.16.6 Field sprayer operation..........................................................................................................32
2.16.7 Cleaning, maintenance and repair.........................................................................................33
3Loading.......................................................................................................34
4Product description...................................................................................35
4.1 Overview of the assemblies...................................................................................................36
4.2 Operating instructions and third party documentation...........................................................37
4.3 Safety and protection equipment...........................................................................................38
4.4 Transportation equipment......................................................................................................39
4.5 Intended use..........................................................................................................................40
4.6 Regular device inspections....................................................................................................41
4.7 Consequences of using certain crop protection agents.........................................................41
4.8 Danger areas and danger points...........................................................................................42
4.9 Rating plate and CE mark......................................................................................................43
4.10 Conformity..............................................................................................................................43
4.11 Technically possible maximum application rate.....................................................................43
4.12 Maximum permissible application rate...................................................................................43
4.13 Technical data........................................................................................................................45
4.13.1 Basic weight (empty weight)..................................................................................................45
4.13.2 Permissible total weight and payload ....................................................................................46
4.13.3 Technical data spraying system.............................................................................................50
4.13.4 Technical data, carrier vehicle...............................................................................................51
4.13.5 Emission values according to noise and vibration health & safety regulations.....................52

Table of Contents
6
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
5Structure and function, carrier vehicle.................................................... 53
5.1 Drive...................................................................................................................................... 53
5.1.1 Driving-in the engine ............................................................................................................. 53
5.1.2 Engine fuel system................................................................................................................ 54
5.2 Exhaust gas treatment.......................................................................................................... 55
5.2.1 Diesel particle filter................................................................................................................ 55
5.2.2 Reduction of the nitrogen oxides in the exhaust gas (SCR)................................................. 56
5.3 Running gear......................................................................................................................... 57
5.3.1 Hydraulic track width adjustment .......................................................................................... 57
5.4 Pantera-W with maximum track width of 3 metres................................................................ 58
5.5 Pantera-H with hydraulic height adjustment ......................................................................... 59
5.6 Steering................................................................................................................................. 60
5.6.1 Perform a track correction..................................................................................................... 61
5.7 Traction control system......................................................................................................... 62
5.8 Wheel gears.......................................................................................................................... 62
5.9 Mudguards ............................................................................................................................ 62
5.10 Hydro-pneumatic spring suspension..................................................................................... 63
5.11 Brake system......................................................................................................................... 64
5.12 Foldable wheel chocks.......................................................................................................... 64
5.13 Hydraulic system................................................................................................................... 65
5.13.1 Hydraulic pumps.................................................................................................................... 66
5.13.2 Hydraulic wheel motors and gearbox.................................................................................... 66
5.13.3 Hydraulic oil tank................................................................................................................... 66
5.14 Radiator................................................................................................................................. 67
5.15 Driver's cabin......................................................................................................................... 68
5.15.1 Foldable access ladder......................................................................................................... 69
5.15.2 Steering column with multi-function switch and brake pedal................................................ 70
5.15.3 Adjusting the driver's seat..................................................................................................... 72
5.15.4 Control panel......................................................................................................................... 73
5.15.5 Emergency shutdown............................................................................................................ 75
5.15.6 Operating elements, Comfort and Light................................................................................ 75
5.15.7 Operating elements, Safety and Maintenance...................................................................... 76
5.15.8 Rear right side in the cabin ................................................................................................... 77
5.15.9 Armrest.................................................................................................................................. 78
5.15.10 Cooling compartment and ashtray........................................................................................ 78
5.15.11 AmaTron / AmaPad control terminal to control the field sprayer.......................................... 79
5.15.12 Air conditioner ....................................................................................................................... 80
5.15.13 Tractor cab air filtration with Category 4 safety status.......................................................... 82
5.15.14 Covers and compartments outside the cabin........................................................................ 85
5.16 Driving lever with multi-function stick.................................................................................... 87
5.16.1 Driving lever .......................................................................................................................... 87
5.16.2 AmaPilot AmaPilot/AmaPilot+ multi-function stick................................................................ 87
5.17 Camera system..................................................................................................................... 90
5.18 Working platform with ladder................................................................................................. 91
5.19 Drawbar for trailers................................................................................................................ 93
5.19.1 Coupling the trailer................................................................................................................ 95
5.19.2 Uncoupling the trailer............................................................................................................ 95
6Construction and function of the field sprayer....................................... 96
6.1 Functionality of the field sprayer ........................................................................................... 96
6.2 Overview control terminal...................................................................................................... 97
6.3 Explanation for the valve chest............................................................................................. 98
6.4 Agitators .............................................................................................................................. 100
6.5 Suction port for filling the spray liquid tank ......................................................................... 101
6.6 Filling connection for pressure filling of the spraying agent tank........................................ 102
6.7 Filter equipment................................................................................................................... 103

Table of Contents
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
7
6.8 Flushing water tank..............................................................................................................106
6.9 Induction bowl with filling connection for Ecofill and canister flushing.................................107
6.10 Hand wash tank...................................................................................................................109
6.11 Pumps..................................................................................................................................110
6.12 Construction and function of the sprayer boom...................................................................111
6.12.1 Super-L boom ......................................................................................................................115
6.13 Reduction joint on the outer boom (optional).......................................................................116
6.14 Boom width reduction (option).............................................................................................117
6.15 Boom extension (option)......................................................................................................118
6.16 Tilt adjustment......................................................................................................................119
6.17 DistanceControl ...................................................................................................................119
6.18 Spray lines ...........................................................................................................................120
6.18.1 Technical data......................................................................................................................121
6.19 Nozzles ................................................................................................................................123
6.19.1 Multiple nozzles ...................................................................................................................123
6.19.2 Edge nozzles .......................................................................................................................126
6.20 Automatic single nozzle control (optional)...........................................................................127
6.20.1 Single nozzle control AmaSwitch.........................................................................................127
6.20.2 4-way AmaSelect single nozzle control...............................................................................127
6.21 Application rate increase with HighFlow..............................................................................129
6.22 Special optional equipment for liquid fertiliser.....................................................................131
6.22.1 Three-ray nozzles................................................................................................................131
6.22.2 7 hole nozzles / FD nozzles (optional).................................................................................132
6.23 Drag hose equipment for Super-L boom (optional).............................................................133
6.24 Spray gun, with 0.9 m long spray tube without pressure hose............................................133
6.25 Line filter for spray lines (optional).......................................................................................134
6.26 Exterior wash down kit.........................................................................................................134
6.27 Lift module............................................................................................................................135
6.28 Control terminal cover..........................................................................................................136
6.29 Attachment kit sensors of the PSR steering system (optional)............................................137
6.30 Accessories for protecting the plants...................................................................................138
7AMADRIVE control terminal .............................................................139
7.1 Indicator lights......................................................................................................................140
7.2 Touch sensitive function fields.............................................................................................141
7.3 Instrument panel..................................................................................................................142
7.4 Main menu ...........................................................................................................................143
7.4.1 Menu structure overview......................................................................................................144
7.5 Drive submenu.....................................................................................................................145
7.6 Running gear submenu........................................................................................................146
7.6.1 Height adjustment Pantera-H...............................................................................................148
7.7 Sprayer submenu.................................................................................................................149
7.8 Work lights, submenu ..........................................................................................................151
7.9 Operating data.....................................................................................................................152
7.10 Configuration........................................................................................................................154
7.11 Error messages....................................................................................................................157
8Start-up.....................................................................................................158
8.1 Securing machine against accidental starting and rolling....................................................158
9Driving on public roads...........................................................................159
9.1 Requirements for driving on public roads............................................................................161

Table of Contents
8
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
10 Driving with the Pantera ......................................................................... 162
10.1 Starting the engine.............................................................................................................. 162
10.2 Driving with the machine..................................................................................................... 162
10.3 Stopping the engine ............................................................................................................ 164
11 Using the field sprayer............................................................................ 165
11.1 Using the machine with comfort package ........................................................................... 165
11.2 Preparing for spraying operation......................................................................................... 166
11.3 Preparing the spray liquid ................................................................................................... 166
11.3.1 Calculating the filling and re-fill quantity.............................................................................. 170
11.3.2 Filling table for remaining spray area.................................................................................. 171
11.3.3 Filling the spray liquid tank via the suction port and blend in the agent at the same time.. 172
11.3.4 Filling the spray liquid tank via the pump pressure connection and flushing in the agent.. 176
11.3.5 Filling the flushing water tank.............................................................................................. 177
11.3.6 Flushing in with Ecofill......................................................................................................... 178
11.4 Spraying operation.............................................................................................................. 179
11.4.1 Applying the spray liquid..................................................................................................... 181
11.4.2 Drift reduction measures..................................................................................................... 182
11.4.3 Dilute the spray liquid with rinsing water............................................................................. 183
11.5 Residual amounts................................................................................................................ 184
11.5.1 Disposing of the residues.................................................................................................... 184
11.5.2 Draining the spray liquid tank using the pump (Option)...................................................... 185
11.6 Cleaning the field sprayer ................................................................................................... 186
11.6.1 Cleaning the sprayer with the tank empty........................................................................... 187
11.6.2 Draining the final residue .................................................................................................... 188
11.6.3 Cleaning the suction filter when tank is empty.................................................................... 189
11.6.4 Cleaning the pressure filter................................................................................................. 191
11.6.5 Exterior cleaning.................................................................................................................. 192
11.6.6 Cleaning the sprayer during a critical agent change........................................................... 192
11.6.7 Contact of the implement with liquid fertiliser...................................................................... 192
11.6.8 Flushing the sprayer with the tank filled (work interruption)................................................ 193
11.7 Using the field sprayer with HighFlow................................................................................. 194
12 Faults........................................................................................................ 197
12.1 Towing, salvaging, evacuating the machine....................................................................... 197
12.2 AMADRIVE faults and warning messages.......................................................................... 199
12.3 Malfunctions during spraying operation.............................................................................. 201
13 Cleaning, maintenance and repair......................................................... 202
13.1 Cleaning.............................................................................................................................. 204
13.2 Winter storage and long periods out of operation............................................................... 205
13.3 Maintenance schedule........................................................................................................ 208
13.4 Maintenance work with the engine running......................................................................... 212
13.5 Lubrication specifications.................................................................................................... 213
13.5.1 Central lubrication ............................................................................................................... 215
13.6 Maintenance of the carrier vehicle...................................................................................... 216
13.6.1 Oils and operating fluids...................................................................................................... 216
13.6.2 Fuel filter.............................................................................................................................. 218
13.6.3 Fuel pre-filter (Euro 4 Emission Standard).......................................................................... 219
13.6.4 Fuel pre-filter (Euro 3A Emission Standard)....................................................................... 220
13.6.5 Bleeding the fuel system..................................................................................................... 221
13.6.6 Replacing the DEF filter...................................................................................................... 221
13.6.7 Diesel engine oil level check and oil change ...................................................................... 222
13.6.8 Air intake system of the engine........................................................................................... 224
13.6.9 Cooling system of the engine.............................................................................................. 226
13.6.10 Radiator............................................................................................................................... 227
13.6.11 Valve play............................................................................................................................ 228
13.6.12 Belt drive ............................................................................................................................. 228
13.6.13 Electrical system of the engine ........................................................................................... 229

Table of Contents
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
9
13.6.14 Wheel gears.........................................................................................................................230
13.6.15 Tyres / wheels......................................................................................................................231
13.6.16 Brakes..................................................................................................................................233
13.6.17 Hydraulic part of brake system ............................................................................................235
13.6.18 Hydraulic system..................................................................................................................240
13.6.19 Hydraulic oil..........................................................................................................................244
13.6.20 Control..................................................................................................................................246
13.6.21 Air conditioner......................................................................................................................250
13.7 Field sprayer maintenance...................................................................................................253
13.7.1 Adjusting the hydraulic throttle valve...................................................................................253
13.7.2 Pumps..................................................................................................................................255
13.7.3 Checking and replacing the suction and pressure-side valves (workshop work)................256
13.7.4 Checking and replacing the piston diaphragm (workshop work).........................................257
13.7.5 Checking and exchanging the pressure reservoir diaphragm (workshop task)...................258
13.7.6 Calibrate the flow meter.......................................................................................................259
13.8 Nozzles ................................................................................................................................260
13.9 Line filter...............................................................................................................................261
13.9.1 Instructions on testing the field sprayer...............................................................................262
13.10 Screw tightening torques .....................................................................................................263
14 Diagrams and overviews.........................................................................264
14.1 Liquid circuit Comfort package 1 / Part-width section control..............................................264
14.2 Liquid circuit Comfort package 1 / Single nozzle control.....................................................265
14.3 Hydraulic diagrams..............................................................................................................267
14.4 Pneumatic diagram..............................................................................................................270
14.5 Overview of fuses and relay.................................................................................................271
14.5.1 Fuses on the central electrics under the arm rest................................................................272
14.5.2 Fuses and relay in the cabin roof.........................................................................................276
15 Spray table ...............................................................................................280
15.1 Spray tables for flat-fan, anti-drift, injector and airmix nozzles, spraying height 50 cm......280
15.2 Spraying nozzles for liquid manure......................................................................................284
15.2.1 Spray table for three-ray nozzle, spraying height 120 cm...................................................284
15.2.2 Spray table for 7-hole nozzles .............................................................................................286
15.2.3 Spray table for FD nozzles...................................................................................................287
15.2.4 Spray table for drag hose unit..............................................................................................288
15.3 Conversion table for spraying ammonium nitrate / urea solution (AUS) liquid fertiliser ......291

User Information
10
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
1 User Information
The User Information section provides information on use of the oper-
ating manual.
1.1 Purpose of the document
This operating manual
•describes the operation and maintenance of the machine.
•provides important information on safe and efficient handling of
the machine.
•is a component part of the machine and should always be kept
with the machine or the towing vehicle.
•Keep it in a safe place for future use.
1.2 Locations in the operating manual
All the directions specified in the operating manual are always seen in
the direction of travel.
1.3 Diagrams
Instructions and responses
Activities to be carried out by the user are given as numbered instruc-
tions. Always keep to the order of the instructions. The reaction to
instructions is given by an arrow.
Example:
1. Instruction 1
→Machine response to instruction 1
2. Instruction 2
Lists
Lists without an essential order are shown as a list with bullets.
Example:
•Point 1
•Point 2
Item numbers in diagrams
Numbers in round brackets refer to items in diagrams. The first num-
ber refers to the diagram and the second number to the item.
Example: (Fig. 3/6)
•Figure 3
•Item 6

General Safety Instructions
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
11
2 General Safety Instructions
This section contains important information on safe operation of the
machine.
2.1 Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety information and safety regulations is a
basic requirement for safe handling and fault-free machine operation.
Obligations of the operator
The operator is obliged only to let those people work with/on the ma-
chine who
•
are aware of the basic workplace safety information and accident
prevention regulations.
•have been instructed in working with/on the machine.
•have read and understood this operating manual.
The operator is obliged
•to keep all the warning symbols on the machine in a legible
state.
•to replace damaged warning symbols.
If you still have queries, please contact the manufacturer.
Obligations of the user
Before starting work, anyone charged with working with/on the ma-
chine is obliged
•to comply with the basic workplace safety instructions and acci-
dent prevention regulations.
•
to read and follow the "General safety information" section of this
operating manual.
•to read the section "Warning symbols and other labels on the
machine" (page 18) of this operating manual and to follow the
safety instructions represented by the warning symbols when
operating the machine.
•To get to know the machine.
•To read the sections of this operating manual, important for car-
rying out your work.
If the user discovers that a function is not working properly, then they
must eliminate this fault immediately. If this is not the task of the user
or if the user does not possess the appropriate technical knowledge,
then they should report this fault to their superior (operator).

General Safety Instructions
12
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
Risks in handling the machine
The machine has been constructed to the state-of-the art and the
recognised rules of safety. However, operating the machine may
cause risks and restrictions to
•the health and safety of the user or third parties,
•the machine,
•other property.
Only use the machine
•for the purpose for which it was intended.
•in a perfect state of repair.
Eliminate any faults immediately which could impair safety.
Guarantee and liability
Our "General conditions of sales and delivery" are always applicable.
These shall be available to the operator, at the latest on conclusion of
the contract. Guarantee and liability claims for damage to people or
property will be excluded if they can be traced back to one or more of
the following causes:
•Improper use of the machine.
•Improper installation, commissioning, operation and mainte-
nance of the machine.
•Operation of the machine with defective safety equipment or
improperly attached or non-functioning safety equipment.
•Non-compliance with the instructions in the operating manual
regarding commissioning, operation and maintenance.
•Unauthorised design changes to the machine.
•Insufficient monitoring of machine parts which are subject to
wear.
•Improperly executed repairs.
•Disasters through the impact of foreign bodies and Acts of God.

General Safety Instructions
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
13
2.2 Representation of safety symbols
Safety instructions are indicated by the triangular safety symbol and
the highlighted signal word. The signal word (danger, warning, cau-
tion) describes the severity of the risk, and carries the following mean-
ing:
DANGER
Indicates an immediate high risk which will result in death or
serious physical injury (loss of body parts or long term damage)
if not avoided.
If the instructions are not followed, then this will result in imme-
diate death or serious physical injury.
WARNING
Indicates a medium risk, which could result in death or (serious)
physical injury if not avoided.
If the instructions are not followed, then this may result in death
or serious physical injury.
CAUTION
Indicates a low risk which could cause minor or medium level
physical injury or damage to property if not avoided.
IMPORTANT
Indicates an obligation to special behaviour or an activity re-
quired for proper machine handling.
Non-compliance with these instructions can cause faults on the
machine or disturbance to the environment.
NOTE
Indicates handling tips and particularly useful information.
These instructions will help you to use all the functions of your
machine in the best way possible.

General Safety Instructions
14
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
2.3 Organisational measures
The operator must provide the necessary personal protective equip-
ment as per the information provided by the manufacturer of the crop
protection agent to be used, such as:
•Safety glasses;
•Protective shoes
•Chemical-resistant overalls,
•Skin protection agents, etc.
The operating manual
•Must always be kept at the place at which the machine is oper-
ated.
•Must always be easily accessible for the user and maintenance
personnel.
Check all the available safety equipment regularly.
2.4 Safety and protection equipment
Before starting up the machine each time, all the safety and protection
equipment must be properly attached and fully functional. Check all
safety and protection equipment regularly.
Faulty safety equipment
Faulty or disassembled safety and protection equipment can lead to
dangerous situations.
2.5 Informal safety measures
As well as all the safety information in this operating manual, comply
with the general, n
ational regulations pertaining to accident prevention
and environmental protection.
When driving on public roads and routes you should comply with the
statutory road traffic regulations.

General Safety Instructions
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
15
2.6 User training
Only those people who have been trained and instructed may work
with/on the machine. The operator must clearly specify the responsi-
bilities of the people charged with operation and maintenance work.
People being trained may only work with/on the machine under the
supervision of an experienced person.
Person
Activity
Person special-
ly trained for the
activity 1)
Trained person
2) Persons with specialist
training
(specialist workshop) 3)
Loading/Transport X X X
Start-up -- X --
Set-up, tool installation -- -- X
Operation -- X --
Maintenance -- -- X
Troubleshooting and fault elimina-
tion -- X X
Disposal X -- --
Legend: X..permitted --..not permitted
1) A person who can assume a specific task and who can carry out
this task for an appropriately qualified company.
2) Instructed persons are those who have been instructed in their
assigned tasks and in the possible risks in the case of improper
behaviour, have been trained if necessary, and have been in-
formed about the necessary protective equipment and
measures.
3) People with specialist technical training shall be considered as a
specialist. Due to their specialist training and their knowledge of
the appropriate regulations, they can evaluate the work with
which they have been charged and detect possible dangers.
Comment:
A qualification equivalent to specialist training can be obtained
from several years' experience in the relevant field.
If maintenance and repair work on the machine is additionally marked
"Workshop work", only a specialist workshop may carry out such
work. The personnel of a specialist workshop shall possess the ap-
propriate knowledge and suitable aids (tools, lifting and support
equipment) for carrying out the maintenance and repair work on the
machine in a way which is both appropriate and safe.

General Safety Instructions
16
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
2.7 Safety measures in normal operation
Only operate the machine if all the safety and protection equipment is
fully functional.
Check the machine at least once a day for visible damage and check
the function of the safety and protection equipment.
2.8 Danger from residual energy
Note that there may be residual mechanical, hydraulic, pneumatic and
electrical/electronic energy on the machine.
Use appropriate measures to inform the operating personnel. You can
find detailed information in the relevant sections of this operating
manual.
2.9 Maintenance and repair work, fault elimination
Carry out prescribed setting, maintenance and inspection work in
good time.
Secure all media such as compressed air and the hydraulic system
against unintentional start-up.
Carefully fix and secure larger assemblies to lifting gear when carry-
ing out replacement work.
Regularly check that bolted connections are firmly secured and tight-
en if necessary.
When the maintenance work is completed, check the function of the
safety devices.
2.10 Design changes
You may make no changes, expansions or modifications to the ma-
chine without the authorisation of AMAZONEN-WERKE. This also
applies when welding support parts.
Any expansion or modification work shall require the written approval
of AMAZONEN-WERKE. Only use modification and accessory parts
approved by AMAZONEN-WERKE so that the type approval, for ex-
ample, remains valid in accordance with national and international
regulations.
Vehicles with an official type approval or with equipment connected to
a vehicle with a valid type approval or approval for road transport
according to the German road traffic regulations must be in the state
specified by the approval.
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through the failure of support parts.
It is strictly forbidden to
•drill holes in the frame or on the running gear.
•increase the size of existing holes on the frame or the running
gear.
•weld support parts.

General Safety Instructions
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
17
2.10.1 Spare and wear parts and aids
Immediately replace any machine parts which are not in a perfect
state.
Only use genuine AMAZONE spare and wear parts, or those ap-
proved by AMAZONEN-WERKE, so that the type approval remains
valid according to the national and international regulations. If you use
wear and spare parts from third parties, there is no guarantee that
the
y have been designed and manufactured in such a way as to meet
the requirements placed on them.
AMAZONEN-WERKE shall accept no liability for damage caused by
the use of non-approved spare and wear parts or aids.
2.11 Cleaning and disposal
Handle and dispose of any materials used carefully, in particular
•when carrying out work on lubrication systems and equipment
and
•when cleaning using solvents.
2.12 User workstation
The machine may only be operated by one person sitting in the driv-
er's seat of the tractor.
Otherwise no other person must remain in the cabin or on the ma-
chine when driving.
The helpers seat must only be used for manoeuvring trips.
Drive the machine only when wearing the seat belt.

General Safety Instructions
18
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
2.13 Warning symbols and other signs on the machine
Always keep all
the warning pictograms of the machine clean and in a
legible state. Replace illegible warning pictograms. You can obtain the
warning symbols from your dealer using the order number
(e.g. MD 078).
Warning symbols - structure
Warning symbols indicate danger areas on the machine and warn
against residual dangers. At these points, there are permanent or
unexpected dangers.
A warning symbol consists of two fields:
Field 1
is a symbol describing the danger, surrounded by triangular safety
symbol.
Field 2
is a symbol showing how to avoid the danger.
Warning symbols - explanation
The column Order number and explanation provides an explanation
of the neighbouring warning symbol. The description of the warning
symbols is always the same and specifies, in the following order:
1. A description of the danger.
For example: risk of cutting
2. The consequence of non-compliance with the risk avoidance
instructions.
For example: causes serious injuries to fingers or hands.
3. Risk avoidance instructions.
For example: only touch machine parts when they have come to
a complete standstill.

General Safety Instructions
Pantera 4502 CP1_E3A_E4
BAG0166.5 12.18
19
2.13.1 Positions of warning symbols and other labels
Warning symbols
The following diagrams show the arrangement of the warning symbols
on the machine.
Fig. 1
Fig. 2

General Safety Instructions
20
Pantera 4502 CP1_E3A_E4 BAG0166.5
12.18
Fig. 3