Assa Abloy Corbin Russwin MP6600 Series User manual

FM527 03/20
Installation Instructions
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
MP6600 Series
M19S/M19V Occupancy Indicators
with Emergency Release
Multi-Point Lock
1 Package Contents
M19S
M19V
Figure1
8
7
6
4
5
3
1
2
Figure1 Description Qty. Figure1 Description Qty.
1 Indicator Button 1 6 Rotation Plate 1
2 Indicator Button Emergency Release 1 7 Snap Ring 1
3 Housing Plate 1 8 Spindle 1
4 Red/White Slide 1 9 #6 x 5/8" Wood Screw (not shown) 2
5 VAC/OCC Slide 1 10 #6-32 x 1/2" MS (not shown) 2
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information
go to www.P65warnings.ca.gov.

2
MP6600 Series
Installation Instructions
Multi-Point Lock
FM527 03/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1 M19S/M19V Occupancy Indicator
Figure2
Inside of door
Centerline
of lockbody
2-1/2"
Template layout
on door edge.
Outside of door
Fold here according to door hand and bevel
Low side of door
Inside RHRB
Outside LH
No bevel door
High side of door
Inside RH
Outside LHRB
TOP
Figure3
2-3/4" 1-3/8"
9/16" 1/2" diameter hole
Lever or
knob
For metal doors:
drill two (2) pilot
holes
0.106 (#36 drill)
and tap
(#6-32 Unc)
9/16"
Cylinder
2-1/2"
Centerline of lockbody

3
MP6600 Series
Installation Instructions
Multi-Point Lock
FM527 03/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
2 Changing Indicator Slides
1. Remove snap ring.
2. Remove rotation plate, spindle, and slide.
3. Replace with alternate slide.
4. Reassemble spindle and rotation plate.
Note:
Ensure proper orientation of VAC/OCC Slide.
5. Replace snap ring into groove in button.
Rotation Plate
Slide
Slide
Spindle
Snap Ring
M19V
O V O
C A C
C C C
M19S
Figure4
Fold here according to door hand and bevel
Figure5
Low side of door.
Inside LHRB
Outside RH
Centerline of lockbody
No bevel door
High side of door.
Inside LH
Outside RHRB
2-3/4"
1-3/8"
9/16"
1/2" diameter hole
Lever or
knob
For metal doors:
drill two (2) pilot
holes
0.106 (#36 drill)
and tap
(#6-32 Unc)
9/16"
Cylinder
2-1/2"

Corbin Russwin is a brand associated with ASSA ABLOY Access and Egress Hardware Group, Inc., an ASSA ABLOY Group company.
Copyright © 2017, 20109, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
Phone: [phone]
Fax: [phone]
www.corbinrusswin.com
FM527 03/20