Ballard Designs MB489 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1/30/2019
RECOMMENDED BED FRAME: LEGGETT AND PLATT FRAMES:
K45G / K45R - Queen / King / California King
Page 1 of 3
PRODUCT NAME: Banyan Bone Inlay Headboard
ITEM NUMBER: MB489
ASSEMBLED DIMENSIONS: 68”H x 65.6”W x 3.8”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
Ltr.
A 4
B 4
C 1
Qty. Hardware Included
Ltr.
D 1
Qty. Components
Headboard (D)
M8 x 85mm
Two person assembly
suggested.
NOTE: To avoid accidentally
discarding small parts or
hardware, retain all carton
contents until assembly
is complete.
Bolts
Nuts
Wrench

Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(A)
(D)
(B)
(C)
STEP 1: Align holes on Metal Bed Frame with corresponding holes on front of
Headboard Legs (D). Attach Metal Bed Frame using 2 Bolts (A) and 2 Nuts (B)
on each leg of Headboard. Secure Nuts with Wrench (C).
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as
they can damage the finish. Dust with soft cloth.

(E)
(H)
(F)
(G)
Attach 2 Brackets (G) horizontally to the top back corners of the headboard using the Small Screws (E).
Screw the remaining Brackets (G) into the wall vertically 1 inch below the previously installed Brackets
using the Large Screws (F). The Large Screws should be screwed into a stud in the wall. Align the
Brackets vertically and string in the Retention Belts (H). Confirm Straps are securely laced and locked.
Ltr.
E 4 Small Screws
F 4 Large Screws
G 4 Brackets
H 2 Retention Belts
Qty. Hardware Included
ANTI-TIP INSTALLATION