Ballard Designs Banyan Bone Inlay Bed User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 1/30/2019 Page 1 of 5
PRODUCT NAME: Banyan Bone Inlay Bed
ITEM NUMBER: MB491
DIMENSIONS OF ITEM ASSEMBLED: 68”H x 65”W x 88”L
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 5
Ltr.
A 4
B 8
Qty. Hardware Included
Components
C 1
Two person assembly
suggested.
NOTE: To avoid accidentally
discarding small parts or
hardware, retain all carton
contents until assembly
is complete.
REQUIRED TOOLS:
Phillips Screwdriver
(D)
(F)
(E)
(G)
(H)
(I)
(G)
(G)
(G)
(G)
(H)
(I)
(I)
(I)
NOTE: Two Cartons.
Headboard packaged separately from all
other components.

(G)
(H)
(H)
Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Insert Leg (H) into bottom of Footboard (G). Turn clockwise and firmly tighten.
Connect Side Rail (E) and (F) to Headboard (D) by sliding in hooks and firmly pushing
down to lock.
STEP 2:
(D)
(E)
(F)

(D)
(E)
(F) (G)
Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Connect Side Rail (E) and (F) to Footboard (G) by sliding in hooks and firmly pushing
down to lock.
Attach Support Leg (I) to the middle of Support Rail (G) using Bolt (A). Firmly tighten
using Allen Key (C).
STEP 4:
(I)
(G)
(C)
(A)

Page 5 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with a soft cloth.
Attach each Support Rail (G) to Side Rails (E, F) using Screw (B). Firmly tighten using
a screwdriver.
STEP 5:
(B)
(G)
Screwdriver
(not included)
(E)
(F)