Ballard Designs Isabella MB421 User manual

Customer Service: 800-367-2810
Online: www.ballarddesigns.com
PRODUCT NAME: Isabella Large Nightstand with Charging Station
ITEM NUMBER: MB421
DIMENSIONS OF ITEM ASSEMBLED: 30 1/4’’ H X 32’’ W X 18 1/2’’ D
PRODUCTS ARE NOT INTENDED MADE IN INDONESIA
FOR COMERCIAL USE Page 1 of 4
UPDATED: 08/11/2015

Ltr.
Qty.
Hardware included
A
1
Anti Tip Kit
Ltr.
Qty
Components
B
4
STEP 1: Lay the Nightstand on its back on a smooth, clean surface. Screw each Foot (B) into
the bottom corners of the Nightstand.
NOTE: When setting the Nightstand upright, DO NOT put uneven pressure on the Feet.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
TOOLS NEEDED:
Assembly may require 2 people.
NOTE: When unpacking, lay the parts
on a padded surface such as
the packaging provided.
(B)
Feet (B)

STEP 2: If the Nightstand is uneven, adjust the levelers on the bottom of each Foot (B) by twisting
them clockwise or counterclockwise until the Nightstand is even.
ANTI TIP INTALLATION PART A:
Ltr.
Qty
Hardware Included
C
2
Small Screw
D
2
Large Screw
E
2
Brackets
F
1
Retention Belt
Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 3 of 4
(B)

Attach the Brackets (E) horizontally to the top of the back of the Nightstand using the Small Screws (C).
Screw the remaining Brackets (E) vertically 1 inch below the brackets attached to the Nightstand
using the large screws (D). The Large Screws (D) should be screwed into a stud in the wall. Align the
Brackets vertically and string in the Retention Belt (F). Confirm Strap is securely laced and locked.
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with soft cloth. One to two times monthly apply beeswax polish as needed.
Finish can be affected by heat or extended contact with oils or wine.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 4 of 4
C
E
F
D