Ballard Designs CASA Florentina Tarvine Double Pedestal Dining Table... User manual

PRODUCT NAME: Tarvine Double Pedestal
Dining Table
ITEM NUMBER: TD333
DIMENSIONS OF ITEM ASSEMBLED:
30”H x 78”W x 41”D
This item is not intended for commercial use.
Made in Italy.
Page 1 of 3
2010 Ballard Designs, Inc.
Check to ensure that you have the following:
Hardware Included
.ytQ.rtL
Part List
.ytQ.rtL
F
G
I
H
1
2
2
1
Top
Legs
Leaves
Rail
A 8 Bolts
B 8 Washers
C 2 Long Bolts
D 2 Small Washers
E Tool1
800.367.2810
www.ballarddesigns.com
For Assembly Purposes:
-Requires 2 people.
-Requires a wrench.

800.367.2810
www.ballarddesigns.com
STEP 1:Rail Installation
Page 2 of 3
2010 Ballard Designs, Inc.
Flip the Table Top (F) upside down on the floor with the protective wrapping intact.
Then place the Legs (G) on the Top (F).
Install the Rail (H) into the legs with the pre-installed pegs.
Using the Long Bolts (C) and the Small Washers (D), attach the
Rail to the Legs. Be sure the Rail is installed so the bolt holes will not be seen.
(H)
(G) (G)
(F)
(D) (C)

STEP 3:Leaf Installation
STEP 2: Top Installation
Page 3 of 3
2010 Ballard Designs, Inc.
800.367.2810
www.ballarddesigns.com
Align the holes of the table Top (F) with the holes of the Legs (G)
and using the Bolts (A) and Washers (B), attach the legs on all 4 sides of the table.
Unlock the Table Top (F) and pull it apart to allow room for the Leaf.
The lock is underneath the Table Top (F). Place the Leaf (I) on the guide rails underneath
the Table Top. Then slide the Top together, making sure to align the pegs and holes
on the Leaf and Top. Lock the Leaf (I) in place.
(I)
(I)
(G)
(F)
(F)
(F)
(B) (B)
(A) (A)
(UNLOCK)
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with soft cloth. One to two times monthly apply beeswax polish as needed.
Finish can be affected by heat or extended contact with oils or wine.