Ballard Designs Remy MB516 User manual

Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 12-3-2020 Page 1 of 3
PRODUCT NAME: Remy Bed (Queen)
ITEM NUMBER: MB516 (Includes MB514 and MB5015)
ASSEMBLED DIMENSIONS : 60”H x 83”W x 64.5”D
MADE IN CHINA
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 3
Ltr.
A8
B8
Qty. Hardware Included
Ltr.
E
F
1
1
Qty. Components
C 8
REQUIRED TOOLS:
Allen Wrench (included)
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
D1
Allen Bolts
Lock Washers
Curved Washers
Allen Wrench
NOTICE: Product ships in two cartons.
Carton 1: Headboard and Footboard
Carton 2: Slats and Side Rails
G
H
I
2
4
4
Headboard (E)
Footboard (F)
Side Rails (G)
Slats (H)
Support Legs (I)
Cleaning and Care
Periodically dust with a soft, dry cloth.
Protect surfaces to prevent damage.
Do not use alchohol based cleaners or polishers.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Assemble in location for intended use.

Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Orient Side Rails (G) with brackets facing inward then attach each end to Headboard (E) and
Footboard (F) using Allen Bolt (A), Lockwasher (E) and Curved Washer (C). See illustration for correct
order.
Carefully insert and LOOSELY TIGHTEN ALL BOLTS before fully tightening using Allen Wrench (D).
(F)
(E)
(G)
(C) (B)
(A)
(D)
O
r
i
ent
t
hi
s
side
i
nw
a
rd.
Slat Brackets
MUST face inward.
STEP 2: Attach a Support Leg (I) to center of each Slat (J). Insert threaded stud into T-nut and turn to
tighten (Fig. 1)
STEP 3: Carefully place each Slat/Leg Assembly between Side Rails (G) by fitting hooked end into
Side Rail Brackets. (Fig. 2)
(J)
(I)
Fig. 1 Fig. 2
(G)
Assemble in location for intended use.