Ballard Designs MB401 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 8-7-2020 Page 1 of 3
PRODUCT NAME: Caludette Headboard
ITEM NUMBER: MB401
ASSEMBLED DIMENSIONS : KING 67”H x 80”W x 3.5 ”D
QUEEN 67”H x 62”W x 3.5”D
TWIN 58.25”H x 39.35”W x 3”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 3
Ltr.
A 4
B 4
Qty. Hardware Included
Ltr.
D
E
1
1
Qty. Components
C 1
REQUIRED TOOLS:
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
Hex Nuts
Wrench
Bird (D)
Headboard (E)
Hex Bolts (6mm)
Assemble in location for intended use.

(D)
(E)
Page 3 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1: Attach Frame (not included) to Headboard (E) as illustrated. If frame does not align with
pre-drilled holes in Headboard, consider using a *Modification Plate, commonly called a Modi
Plate (not included). These are available by searching on-line or a local retailer.
Modi Plate
(Not Included)
*
(E)
(A)
(B)
(C)
STEP 2: Insert Bird (D) into pre-drilled hole in top edge of Headboard (E)
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alchohol based
cleaners or polishers.
Assemble in location for intended use.