Ballard Designs Andrews Coffee Table ME007 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 12/15/2015 Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDONESIA
PRODUCT NAME: Andrews Coffee Table
ITEM NUMBER: ME007
DIMENSIONS OF ITEM ASSEMBLED: 18 1/4”H x 50”W x 28”D

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
Table Top (E)
Legs (F)
Base (G)
Ltr.
E 1
F 4
G 1
Qty. Components
TOOLS NEEDED:
-Assembly requires 2 people.
Ltr.
A
B
4 Hexagonal Bolts
4Lock Washers
C 4 Flat Washers
D 1 Wrench
Qty. Hardware Included
NOTE: When unpacking, lay
the parts on a padded surface
such as the packaging
provided.
Be sure to locate all hardware
before throwing away any
packaging.

Page 3 of 4
STEP 1: Lay the Table Top (E) upside down on a padded, clean surface. Screw all four Table Legs (F)
into the corners on the Table Top. Do not overtighten.
STEP 2:
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Place the Table Base (G) on the Table Legs (F) and align the holes in the Base with the holes
in the Legs. Attach the Base to the Table Legs by screwing in the Hexagonal Bolts (A), Lock
Washers (B), and Flat Washers (C) into each corner using the Wrench (D). Carefully flip the
Table upright. Make sure all Bolts are fully tightened before turning the Table upright.
(E)
(F)
(A)
(B)
(C)
(D)
(G)
(F)

Page 4 of 4
STEP 3: If the Table is uneven, adjust the recessed levelers located underneath the Table Base (G).
Carefully elevate one side of the Table and twist the levelers clockwise or counterclockwise
until the Table is even..
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with a soft cloth. One to two times monthly, apply beeswax polish as needed.
(G)