Bradley Halo S19314EW User manual

P.O. Box 309, Menomonee Falls, WI USA 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Installation
215-1684 Rev. P; ECN 15-05-019
© 2015 Bradley
Page 1 of 56 8/5/2015
S19314 Series
Halo™ Combination Drench Shower
and Eyewash or Eye/Face Wash

2
S19314 Installation
8/5/2015 Bradley • 215-1684 Rev. P; ECN 15-05-019
Table of Contents
Table of Contents..........................................................................2
Pre-Installation Information ................................................................ 3-4
Halo Pre-Configured Models ................................................................5-6
Halo Configurator..........................................................................7
Dimensions ..............................................................................8
Installation Instructions ..................................................................9–10
Service Parts — Bowl and Hub...........................................................11–12
Service Parts — Eyewash, Eye/Face Wash and Bowl Covers ...................................13–15
Service Parts — Base and Drain.............................................................16
Service Parts — Drench Shower..........................................................17–19
Service Parts — Optional Accessories ........................................................20
Avant l’installation ..................................................................... 21-22
Modèles préconfigurés Halo ..............................................................23-24
Configuration du produit ...................................................................25
Dimensions .............................................................................26
Instructions d'installation ................................................................27–29
Pièces de remplacement — Récepteur et moyeu.............................................30–31
Pièces de remplacement — Douche oculaire, Douche oculaire/faciale et couvercle anti-poussières .....32–33
Pièces de remplacement — Bride et drain .....................................................34
Pièces de remplacement — Douche d'urgence ..............................................35–37
Pièces de remplacement — Accessoires en option ..............................................38
Información previa a la instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-40
Modelos preconfigurados Halo ............................................................41-42
Configuración del producto .................................................................43
Dimensiones ............................................................................44
Instrucciones de instalación. .............................................................45–46
Piezas de repuesto — Receptor y buje.....................................................47–48
Piezas de repuesto — Lavaojos, lavaojos/rostro y cubierta contrapolvo ...........................49–51
Piezas de repuesto — Base y drenaje ........................................................52
Piezas de repuesto — Ducha de aspersión .................................................53–55
Piezas de repuesto — Accesorios opcionales ..................................................56

3
Installation S19314
Bradley • 215-1684 Rev. P; ECN 15-05-019 8/5/2015
WARNING
Flush the water supply lines before beginning installation and after installation is complete. Test
the unit for leaks and adequate water flow. Main water supply to the eyewash should be “ON” at all
times. Provisions shall be made to prevent unauthorized shutoff.
CAUTION
Emergency equipment must be supplied with tepid water (60°F to 100°F/15.6°C to 37.8°C). Any
prolonged exposure to near freezing water affects the body's ability to maintain body temperature,
increasing the risk of hypothermia.
NOTICE
Before installing this product, ensure that there are adequate clearances around the product and
activation of the product does not interfere with other products or obstructions.
Avoid cleaners containing organic solvents, alcohols and hydrocarbons. Rinse with water after
cleaning.
IMPORTANT
The installation and location of all safety drench showers, eye and eye/face washes must comply
with the requirements of ANSI/ISEA Z358.1.
Read this installation manual completely to ensure proper installation, then file it with the owner or
maintenance department. Compliance and conformity to drain requirements and other local codes
and ordinances is the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for before discarding any
packaging material. If any parts are missing, do not begin installation until you obtain the missing
parts.
The ANSI/ISEA Z358.1 standard requires an uninterrupted supply of flushing fluid. Bradley plumbed
emergency fixtures require a minimum of 30 PSI (0.21MPa) flowing pressure.
Self-closing spring-loaded valves are not UL classified to ANSI/ISEA Z358.1.
Weekly activation must be conducted on all plumbed emergency equipment to ensure a suitable
flushing fluid supply is present and any sediment build-up in the supply line is cleared. Emergency
equipment should be inspected monthly to address any maintenance issues ensuring the
equipment is in good operating condition and that there are no signs of wear.
Workers who may come in contact with potentially hazardous materials should be trained regarding
the placement and proper operation of emergency equipment per ANSI/ISEA Z358.1.
For questions regarding the operation or installation of this product, visit www.bradleycorp.com or
call 800-BRADLEY (272.3539).
Product warranties and parts information may also be found under ”Products” on our web site at
bradleycorp.com.

4
S19314 Installation
8/5/2015 Bradley • 215-1684 Rev. P; ECN 15-05-019
Supplies Required:
• (3)
3⁄8" floor anchors and bolts
• Teflon tape and pipe sealant
• 30 PSI (2.0 bar) min/90 PSI (6.1 bar) max flow pressure
• 125 PSI (8.6 bar) max static pressure
• Piping to 1¼" NPT (BSPP) water supply inlet (30–90 psi [2.0-6.1 bar])
• Piping to 1¼" NPT drain outlet on unit (if included with unit)
• Adequate supply pipe supports
• Provisions to dispose of shower waste water (minimum 30 gallons [115 liters]) should be made (minimum 4" [102mm] drain.
• OPTIONAL: sign-mounting hardware
• DVGW certified teflon tape (for DVGW certified models only)
Local codes may require the installation of a backflow prevention valve to complete proper installation. Compliance with
local codes is the responsibility of the installer. Valve must be tested annually to verify that it is functioning properly.
Backflow prevention valves are not included with the fixture and may be supplied by the contractor or purchased from
Bradley Corporation.

5
Installation S19314
Bradley • 215-1684 Rev. P; ECN 15-05-019 8/5/2015
Halo Pre-Configured Models
Halo Model
Number Description UL certified to ANSI/ISEA
Intertek
certified to
EN standards
Eyewashes
 S19314EW Halo Eyewash, plastic showerhead & bowl X X
S19314P* Halo Eyewash, plastic showerhead & bowl w/ hose spray X X
S19314SB Halo Eyewash, plastic showerhead, stainless steel bowl X X
S19314LL Halo Eyewash, plastic showerhead, stainless steel bowl, hand/foot activated X X
S19314F Halo Eyewash, plastic showerhead w/ stainless steel shroud & bowl X X
S19314UU Halo Eyewash, plastic showerhead w/ stainless steel shroud & bowl, hand/foot operated eyewash X X
Eyewashes with Dust Cover
S19314PDC Halo Eyewash, plastic showerhead & bowl w/ dust cover X X
S19314DC Halo Eyewash, plastic showerhead, stainless steel bowl & hinged dust cover X X
Eye-Face Washes
S19314FW Halo Eye/face wash, plastic showerhead & bowl X X
S19314SBFW Halo Eye/face wash, plastic showerhead, stainless steel bowl X X
S19314AC Halo Eye/face wash, plastic showerhead, stainless steel bowl, hand/foot operated eyewash X X
S19314TT Halo Eye/face wash, plastic showerhead w/ stainless steel shroud & bowl X X
S19314SPR Halo Eye/face wash, stainless steel showerhead & bowl, hand/foot operated eyewash X X
S19314BFPB Halo Eye/face wash, barrier-free, plastic showerhead & bowl X X
S19314BF Halo Eye/face wash, barrier-free, plastic showerhead, stainless steel bowl X X
Eye-Face Washes with Dust Covers
S19314PDCFW Halo Eye/face wash, plastic showerhead & bowl w/ dust cover X X
S19314DCFW Halo Eye/face wash, plastic showerhead, stainless steel bowl & hinged dust cover X X
S19314DCBF Halo Eye/face wash, barrier-free, plastic showerhead, stainless steel bowl w/ dust cove X X
Eye-Face Washes without Eyewash Bowl
S19314GG Halo Eye/face wash, plastic showerhead, no bowl X X
All Stainless Steel Eye-Face Wash
S19314BFSS Halo stainless steel eye/face wash and showerhead, barrier free X X
S19314FSS Halo stainless steel eye/face wash and showerhead X X
S19314SC Halo stainless steel eye/face wash, bowl, cover and showerhead X X
S19314SS Halo stainless steel eye/face wash and showerhead with foot activation X X
S19314SS16 Halo 316 stainless steel eye/face wash and showerhead with foot activation X X
Models with BSPP threading available. For BSPP threading, add a Z to end of existing part
number. For example, S19314EW will be S19314EWZ.