BROSA Cato Entertainment Unit User manual

ASSEMBLY GUIDE
Cato Entertainment Unit
v1.0

Components
Upon unpacking your entertainment unit from it’s delivery box, you should
have the separate pieces shown below. Follow the steps on the next pages to
assemble your new entertainment unit.
A x 8
Spec: 5/16 x 60mm
B x 8
Spec: Ø8 x Ø14mm
C x 8
Spec: Ø4 x 16mm
D x 8
Spec: Ø3.5 x 20mm
E x 2
Spec: 78x 78 x 1.8mm
F x 1
Spec: M5
Hardware What you need
1
2
Entertainment
Unit x 1
Leg x 4
3Leg x 2

Step 1
B x 8
C x 8
D x 8
E x 2
F x 1
A x 8
1.1 Align a leg (2) to the underside of the
entertainment unit (1) so that the screw holes are
overlapping. Fit a washer (B) to a bolt (A) and screw
into a hole and repeat for the other bolt to secure the
leg in place. Repeat process for the remaining legs (2)
and use the allen key (F) to tighten all of the bolts (A).
1.2 Attach a metal plate (E) to a leg (3) with screws
(D) as shown. Repeat for the other leg (3).
1.3 Align a leg (3) to the holes in the middle of the
underside of the entertainment unit and secure in
place using screws (C). Repeat for the other leg (3).
A
B
F
E
D
C
1
2
3
3
Step 1.1 Step 1.2
Step 1.3

Step 2 Gently lift the unit and place upright on a level
surface. Enjoy your new entertainment unit!