BROSA Juno Large Desk User manual

Juno
Large Desk
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

②
②
①
Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Desk Top x 1
Leg Frame x 2
Hardware
D x 1B x 8 C x 4A x 8

Step 1 Slide the drawers out of the desk top ①carcass.
①

Step 2 Align a leg frame ②with the desk top ① car-
cass and make sure the bolt holes on each
side overlap. Fit a washer B into a bolt Aand
insert it into a hole from inside the carcass and
fix it into the hole of the leg frame with the
Allen key D. Repeat this for the remaining holes
and then repeat the process for the other leg
frame.
Ax8
Bx8
Dx1
②
②
①
AB
D

Step 3 Flip the structure formed in Step 2 and place it
upright on a flat surface.
Slide the drawers into the carcass again.

Step 4 Open the drawer properly but do not pull it out.
Find the wooden block with a screw hole in the
middle and align the drawer stopper Cwith the
hole. Fix the stopper into the hole with your
hand.
Repeat this for the other wooden block and
then repeat the process for the other drawer.
Cx4
C

Step 5 Place the completed piece of furniture in its
desired location. Enjoy your new Juno Large
Desk!

User Recommendation
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
Placement
1. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
2. Do not place heavy objects on furniture.
3. When repositioning furniture: lift, don’t drag.
4. Keep sharp objects away. Don’t drag items along the surface.
5. Do not stack furniture.
Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but ensure you dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. Nail polish
and nail polish remover can erode furniture. Dab don’t rub these stains.
3. Take care when using pens or markers on furniture. Keep liquids
away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments when they loosen.
Exposure
1. Use protective coasters and mats between hot items and furniture.
2. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
3. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 50cm from heat or air conditioning.